UNITED STATES 

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-K

 

(Mark One)

 

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended: December 31, 2016

 

or

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from               to              

 

Commission file number: 333-155375

 

(PIONEER POWER SOLUTIONS LOGO) 

 

PIONEER POWER SOLUTIONS, INC. 

(Exact name of registrant as specified in its charter) 

 

Delaware   27-1347616
(State or other jurisdiction of incorporation or organization)   (I.R.S. Employer Identification No.)

 

400 Kelby Street, 12th Floor

Fort Lee, New Jersey 07024

(Address of principal executive offices, including zip code)

 

Registrant’s telephone number, including area code: (212) 867-0700

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class   Name of each exchange on which registered
Common Stock, par value $.001 per share   Nasdaq Stock Market LLC (Nasdaq Capital Market)

 

Securities registered pursuant to Section 12(g) of the Act: None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes No ☐

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes No ☐

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ☐

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer   ☐   Accelerated filer   ☐   Non-accelerated filer   ☐   Smaller reporting company  

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐     No

 

As of June 30, 2016, the last business day of the registrant’s most recently completed second fiscal quarter, the aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant based on the price at which the common equity was last sold on the Nasdaq Capital Market on such date, was approximately $21.5 million. For purposes of this computation only, all officers, directors and 10% or greater stockholders of the registrant are deemed to be affiliates.

 

As of March 28, 2017, 8,712,712 shares of the registrant’s common stock were outstanding. 

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the registrant’s definitive proxy statement for the 2017 Annual Meeting of Stockholders are incorporated herein by reference in Part III of this Annual Report on Form 10-K to the extent stated herein. Such proxy statement will be filed with the Securities and Exchange Commission within 120 days of the registrant’s fiscal year ended December 31, 2016.

 

 

 

 

 

 

PIONEER POWER SOLUTIONS, INC.

 

Form 10-K

 

For the Fiscal Year Ended December 31, 2016

 

TABLE OF CONTENTS

 

        Page
Special Note Regarding Forward-Looking Statements   1
       
PART I      
Item 1. Business  
Item 1A. Risk Factors   10 
Item 1B. Unresolved Staff Comments   20 
Item 2. Properties   21 
Item 3. Legal Proceedings   21 
Item 4. Mine Safety Disclosures   21 
       
PART II      
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities   22 
Item 6. Selected Financial Data   22 
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations   22 
Item 7A. Quantitative and Qualitative Disclosures About Market Risk   33 
Item 8. Financial Statements and Supplementary Data   34 
Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure   67 
Item 9A. Controls and Procedures   67 
Item 9B. Other Information   68 
       
PART III      
Item 10. Directors, Executive Officers and Corporate Governance   68 
Item 11. Executive Compensation   68 
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters   68 
Item 13. Certain Relationships and Related Transactions, and Director Independence   69 
Item 14. Principal Accounting Fees and Services   69 
       
PART IV      
Item 15. Exhibits, Financial Statement Schedules   69 
Item 16. Form 10-K Summary   69 

 

 

     
 

 

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

 

This Annual Report on Form 10-K contains “forward-looking statements,” which include information relating to future events, future financial performance, financial projections, strategies, expectations, competitive environment and regulation.  Words such as “may,” “should,” “could,” “would,” “predicts,” “potential,” “continue,” “expects,” “anticipates,” “future,” “intends,” “plans,” “believes,” “estimates,” and similar expressions, as well as statements in future tense, identify forward-looking statements.  Forward-looking statements should not be read as a guarantee of future performance or results and may not be accurate indications of when such performance or results will be achieved.  Forward-looking statements are based on information we have when those statements are made or management’s good faith belief as of that time with respect to future events, and are subject to risks and uncertainties that could cause actual performance or results to differ materially from those expressed in or suggested by the forward-looking statements. Important factors that could cause such differences include, but are not limited to: 

 

  General economic conditions and their effect on demand for electrical equipment, particularly in the commercial construction market, but also in the power generation, industrial production, data center, oil and gas, marine and infrastructure industries.
  The effects of fluctuations in sales on our business, revenues, expenses, net income, income (loss) per share, margins and profitability.
  Many of our competitors are better established and have significantly greater resources, and may subsidize their competitive offerings with other products and services, which may make it difficult for us to attract and retain customers.
  We depend on Siemens Industry, Inc. (“Siemens”) for a large portion of our business, and any change in the level of orders from Siemens could have a significant impact on our results of operations.
  The potential loss or departure of key personnel, including Nathan J. Mazurek, our chairman, president and chief executive officer.
  Our ability to expand our business through strategic acquisitions.
  Our ability to integrate acquisitions and related businesses.
  Our ability to generate internal growth, maintain market acceptance of our existing products and gain acceptance for our new products.
  Unanticipated increases in raw material prices or disruptions in supply could increase production costs and adversely affect our profitability.
  Restrictive loan covenants and/or our ability to repay or refinance debt under our credit facilities could limit our future financing options and liquidity position and may limit our ability to grow our business.
  Our ability to realize revenue reported in our backlog.
  Operating margin risk due to competitive pricing and operating efficiencies, supply chain risk, material, labor or overhead cost increases, interest rate risk and commodity risk.
  Strikes or labor disputes with our employees may adversely affect our ability to conduct our business.
  A significant portion of our revenue and expenditures are derived or spent in Canadian dollars. However, we report our financial condition and results of operations in U.S. dollars. As a result, fluctuations between the U.S. dollar and the Canadian dollar will impact the amount of our revenues and net income (loss).
  The impact of geopolitical activity on the economy, changes in government regulations such as income taxes, duties and tariffs on the importation of products we sell into the United States, climate control initiatives, the timing or strength of an economic recovery in our markets and our ability to access capital markets.
  Our chairman controls a majority of our voting power, and may have, or may develop in the future, interests that may diverge from yours.
  Material weaknesses in internal controls.
  Future sales of large blocks of our common stock may adversely impact our stock price.
  The liquidity and trading volume of our common stock.

 

The foregoing does not represent an exhaustive list of matters that may be covered by the forward-looking statements contained herein or risk factors that we are faced with that may cause our actual results to differ from those anticipated in our forward-looking statements. Moreover, new risks regularly emerge and it is not possible for us to predict or articulate all risks we face, nor can we assess the impact of all risks on our business or the extent to which any risk, or combination of risks, may cause actual results to differ from those contained in any forward-looking statements. Except to the extent required by applicable laws or rules, we undertake no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events or otherwise. You should review carefully the risks and uncertainties described under the heading “Item 1A. Risk Factors” in this Annual Report on Form 10-K for a discussion of the foregoing and other risks that relate to our business and investing in shares of our common stock.

 

   1  
 

 

PART I

 

ITEM 1.  BUSINESS

 

Overview

 

Pioneer Power Solutions, Inc. and its subsidiaries (“Pioneer,” “we,” “us,” “our,” or “the Company”)  manufactures, sells and services a broad range of specialty electrical transmission, distribution and on-site power generation equipment for applications in the utility, industrial, commercial and backup power markets.  Our principal products and services include custom-engineered electrical transformers, switchgear and engine-generator sets and controls, complemented by a national field-service network to maintain and repair power generation assets. We are headquartered in Fort Lee, New Jersey and operate from twelve (12) additional locations in the U.S., Canada and Mexico for manufacturing, service, centralized distribution, engineering, sales and administration.

 

Our largest customers include a number of recognized national and regional utilities, industrial companies and engineering, procurement and construction firms located in North America. In addition, we sell our products through hundreds of electrical distributors served by our network of stocking locations throughout the U.S. and Canada. We intend to grow our business through internal product development, expansion of our sales force coverage and through acquisitions to increase the scope and relevance of highly-engineered solutions and technical service we offer our customers for their specific electrical applications.

 

Description of Business Segments

 

In 2016, we had two reportable segments: Transmission & Distribution Solutions (“T&D Solutions”) and Critical Power Solutions (“Critical Power”). 

 

  Our T&D Solutions business provides equipment solutions that help customers effectively and efficiently manage their electrical power distribution systems to desired specifications. The reporting segment is comprised of two primary product categories: electrical transformers and switchgear. These solutions are marketed principally through our Pioneer Transformers Ltd. (“PTL”), Jefferson Electric, Inc. (“Jefferson”), Bemag Transformers, Inc. (“Bemag”), Pioneer Critical Power, Inc. (“PCPI”) and Pioneer Custom Electric Products, Inc. (“PCEP”) brand names. As a result of the restructuring plans implemented during calendar year 2015, the activities of our PCPI switchgear operations have been transferred from the Critical Power segment to the T&D Solutions segment as of January 1, 2016.  For comparison purposes, prior periods presented have been adjusted to reflect this reclassification.
  Our Critical Power business provides customers with sophisticated power generation equipment and an advanced data collection and monitoring platform, the combination of which is used to ensure smooth, uninterrupted power to operations during times of emergency. These solutions are marketed by our operations headquartered in Minnesota, currently doing business under the Titan Energy Systems Inc. (“Titan”) brand name.

T&D Solutions Segment

 

We design, develop, manufacture and sell a wide range of electrical transmission and distribution equipment and our emphasis is to provide custom engineered, manufactured-to-order solutions, which we estimate currently represents over two-thirds of our T&D revenue. We believe that demand for our custom solutions is driven primarily by end user maintenance programs to repair, replace or retrofit aging equipment, as well as to upgrade or expand their electrical distribution systems to accommodate growth and other changes in their operations. In addition, a significant portion of our custom solutions revenue is derived from the production of magnetic subassemblies incorporated by original equipment manufacturers (“OEMs”) into the systems they sell, systems which in the case of our customers are principally being used for data center, elevator control and electric drive applications.  The remainder of our T&D Solutions revenue is derived from our catalogue of standard transformer designs, models which are sold primarily through electrical distributors and to brand label customers. These products are manufactured to stock and are used in general purpose electrical applications, with demand being driven by the overall pace of new commercial construction.

 

We distinguish ourselves by producing a wide range of engineered-to-order and standard equipment, sold either directly to end users, through manufacturers’ representatives and engineering and construction firms or through electrical distributors. We serve customers in a variety of industries including electric utilities, industrial customers, OEMs, commercial firms, contractors and renewable energy producers.

 

   2  
 

 

Summary of T&D Segment Offerings
Product Category Solutions

Liquid-filled Transformers

 

 

▪ Small & medium power: substation class units for utilities and large industrial applications

▪ Padmount: used in utility distribution networks, underground and in renewable projects

▪ Network: Subway/vault-type units used to ensure reliability of utility service 

▪ Unitized Padmount: an equipment combination used in place of a conventional substation

▪ Others: mini-pad, platform-mount and other specialty low voltage designs

 

Dry-Type 

Transformers

 

 

▪ Medium voltage & power-dry: custom-designed for applications where a liquid-filled transformer is not suitable for safety concerns and/or other constraints

▪ OEM: custom designed and manufactured magnetic components and subassemblies incorporated by customers into their product offering

▪ Power quality: harmonic-eliminating and mitigating transformers, passive filters, K-factor, control, drive isolation and other magnetically-driven power quality solutions

▪ Low voltage standard: catalogue of ventilated, encapsulated and other designs sold to electrical distributors and brand label customers for general purpose electrical loads 

▪ Low voltage custom: quick-turn, low voltage distribution transformers manufactured to customer electro-mechanical specifications

 

Switchgear

 

▪ Traditional low voltage panel boards, switchboards and switchgear, using electrical components from major manufacturers. 

▪ Unit substations and other specialty solutions

▪ Custom manufactured and U.L. approved Nema electrical enclosures 

▪ Paralleling switchgear (PSG):  low & medium voltage for managing multiple power sources

▪ Automatic Transfer Switches: provides models manufactured by Pioneer and by other major manufacturers 

▪ Other equipment:  controls, load banks, surge protection and related equipment for power conditioning and reliability 

 

Overview of Electrical Transformers

 

Our liquid-filled and dry-type power, distribution and specialty electrical transformers are magnetic products used in the control and conditioning of electrical current for critical processes. An electric transformer is used to increase or decrease the voltage of electricity traveling through a power line. This change in voltage is accomplished by transferring electric energy from one internal coil or winding to another coil through electromagnetic induction. Electric power generating plants use generator transformers to “step-up,” or increase, voltage that is transferred through power lines in order to transmit the electricity more efficiently over long distances. When high voltage electricity nears its final destination, a “step-down” transformer reduces its voltage. A distribution transformer makes a final step-down in voltage to a level usable in businesses and homes.

 

Transformers are integral to every electrical transmission and distribution system. Electric utilities use transformers for the construction and maintenance of their power networks. Industrial firms use transformers to supply factories with electricity and to distribute power to production machinery. The renewable energy industry uses transformers to connect new sources of electricity generation to the power grid. The construction industry uses transformers for the supply of electricity to new homes and buildings and original equipment manufacturers use custom transformers as a component part of the systems they make.

 

We manufacture liquid-filled transformers at our facility in Granby, Quebec. Liquid-filled transformers are typically used for applications handling utility or industrial-level electrical loads, such as in a substation, and are most commonly found in outdoor settings given the risk of leakage and the flammable properties of the liquid coolant, typically mineral oil. We manufacture these products in electrical power ranges from 25 kVA (kilovolt amperes) to 30 MVA (megavolt amperes) and at up to 69 kV (kilovolts) in voltage. In recent years, we have focused primarily on the small power market, generally considered to include transformers between 1 MVA and 10 MVA, as well as on specialty transformers such as network and submersible designs used by utilities to withstand harsh environments and ensure reliability of service. We sell these products to electrical utilities, independent power providers, electrical co-ops, industrial companies, commercial users and electric equipment wholesalers. All of our liquid-filled transformers are designed and manufactured specifically to a customer order.

 

   3  
 

 

We manufacture dry-type transformers and custom magnetics at our facilities in Farnham, Quebec and Reynosa, Mexico. The largest and longest-standing component of our dry-type transformer revenue consists of low voltage, standard distribution units sold from our catalogue of over 1,000 designs. These units are typically used indoors to handle general loads for powering commercial and industrial machinery and equipment requiring 50 VA (volt amperes) through 1 MVA of power transformation capacity in voltages at or below 600 V (volts). In recent years, we have focused primarily on custom-engineered solutions – including equipment for OEM applications, and transformers in the medium voltage and power-dry product classes where our range extends to 10 MVA and to 35 kV in voltage. Medium voltage and power-dry transformers are conventionally used for indoor applications and in metropolitan areas, and are increasingly being used outdoors and indoors for commercial, industrial, manufacturing and production process applications.  They are engineered to meet the most onerous duty requirements and are well-suited to operate in harsh environmental conditions, a situation which occurs frequently when the transformer needs to be installed close to the area where the power will ultimately be used, such as in down-hole mining or on drilling rigs. 

 

We also offer a broad array of magnetically-driven solutions to ensure clean power and eliminate potential issues caused by harmonics and transients, including proprietary solutions that incorporate our patented technology through the use of power electronics.  Our power quality solutions are for use in industrial, commercial and institutional settings where sensitive automation equipment is being used and clean, efficient power is required.

 

Overview of Switchgear

 

There are many different classes of switchgear, a generic term that encompasses the finished assembly of a system of devices utilizing electrical disconnects, fuses and circuit breakers, whose general function is to distribute, control and monitor the flow of electrical energy, while isolating and protecting critical equipment such as transformers, motors and other electrically powered machinery. 

 

We design and manufacture low voltage electric power distribution panel boards, low and medium voltage switchgear and switchboards manufactured at our facility in Southern California. This location specializes in quick-turn, manufactured-to-order circuit protection and control equipment, primarily serving electrical distributors in the region. In addition, it incorporates transformers manufactured at other Pioneer locations into specialty products, such as unit substations, and also serves to supply our PSG solutions with several classes of switchgear used in its customer projects.

 

Additional product categories include paralleling switchgear (PSG), automatic transfer switches (ATS) and provide other necessary equipment to create a reliable and dependable power generation system.  The primary function of our PSG solutions is to reliably switch the power source to the load, protect and operate the power generation source(s), meter output and provide paralleling and load sharing capability between multiple on-site power sources and the utility grid. Our PSG solution specializes in customized equipment and controls for complex primary power applications, enabling on-site users to parallel multiple power sources with the utility power grid, in combined heat, power and cooling applications, and for peak shaving and demand/load side management of electrical power.  PSG is an integral component to ensuring optimal power generation and electrical distribution system performance, both for primary and backup power installations. Installations requiring a PSG solution typically involve more complex and redundant power schemes, such as in data centers, hospitals, industrial facilities, remote locations not connected to the power grid and other sites where emergency backup power sources are a necessity to protect operations from the consequences of blackouts or brownouts. Our focus is on larger installations where a single engine generator, or “genset”, is not sufficient or where multiple gensets may be required to provide system resilience. We believe that our PSG solutions represent a scalable, cost-effective and intelligent automation option through their embedded programming and logic to synchronize multiple on-site power sources and the capability to operate them in concert with the utility feed(s).

 

Critical Power Segment

 

Our Critical Power segment is engaged in designing, manufacturing, selling, commissioning and aftermarket service of onsite power generation and control equipment. Our systems are used to maintain reliable emergency standby power at facilities where it is either required or where the potential consequences of a  power outage make it necessary – such as at data centers, hospitals, communications facilities, factories, national retailers, military sites,  office complexes and other critical operations. 

 

Depending on the needs of our customers, we offer our solutions on a complete equipment package basis, or as a standalone equipment or service solution that addresses one or more requirements of an overall power project. We believe that our value proposition to customers is differentiated by our use of advanced communications and automated data collection technologies to provide a highly-sophisticated remote monitoring, automated control and reporting platform to our customers.

 

   4  
 
   
Product Category Solutions

Power Generation
Equipment

 

 

▪ Engine-generator sets:  power generation equipment with up to 2 MW of power output per genset, sourced from Generac Industrial Power and all major manufacturers.  Available individually or in multi-unit paralleled configurations. Fuel options include natural gas, diesel and bi-fuel. 

▪ Uninterruptible Power Supply (UPS) systems

▪ Proprietary technology solutions: GenMax®

 

Service

 

 

▪ Scheduled preventative maintenance, and 24/7 repair and support services provided for all makes and models of equipment under one to five year contracts 

▪ Regional service: provided by our technicians in the Midwest and Florida

▪ National service: provided by our technicians and network of field service providers throughout the United States for multi-site, multi-state power generation equipment owners

▪ UPS systems from major manufacturers

 

Remote Monitoring

 

▪ Proprietary real-time remote monitoring, metering and control system for onsite power sources and associated equipment

▪ Comprehensive asset management solution, including automated audit and inventory tracking and reporting services  

▪ Scalable solution, ideally-suited to large customers owning critical power systems across multiple locations

 

 

Power Generation Equipment

 

We provide our industrial and commercial customers with a variety of power generation equipment and fuel options which, depending on their needs and applications, can range from several kilowatts to 2 MW of output per genset. Using the PSG capabilities of our switchgear business unit, we excel in projects requiring multiple gensets in side-by-side arrangements that are paralleled for synchronous operation. 

 

Our Critical Power business is the sole authorized distributor for the Industrial Power equipment and parts of Generac Power Systems Inc. (“Generac”) in the states of Minnesota, Iowa, Illinois, Wisconsin and Nebraska, and one of only 32 such distributors throughout North America. Outside of these five Midwestern states, we sell power generation equipment made by all major manufacturers, including Generac. In order to more competitively serve our customers, we regularly provide Pioneer-manufactured power distribution equipment to each project, including switchgear and transformers. We also offer niche solutions such as GenMax® – our proprietary harmonic suppression technology that resolves power reliability and genset capacity issues frequently encountered when new gensets are introduced to a system of existing gensets, where the make, model and power output of the gensets within the system are different.

 

To fully meet the onsite power reliability needs of our customers, we realize a small portion of our revenue from the sale of uninterruptible power supply (UPS) systems. UPS systems are used by data-intensive businesses to provide battery backup power to servers until the emergency backup genset(s) come online. Once the gensets are producing proper voltage and frequency, the UPS switches the load onto the gensets. For UPS system sales, we are an authorized dealer for GE and also represent Toshiba, Eaton-Powerware and other manufacturers.

 

Service

 

Power generation systems represent considerable investments that require proper maintenance and service in order to operate reliably during a time of emergency. Our power maintenance programs provide preventative maintenance, repair and support service for our customers’ power generation systems. To support our customers in managing their critical infrastructure, we maintain inventories of equipment and parts, a fleet of service vehicles and a staff of certified field service technicians in the Midwest and Florida. To complete our geographic coverage, we maintain a network of field service partners located in other regions, enabling us to provide quick-response, 24/7 service capability that can effectively service any make and model of back-up power equipment in any city of the United States. Our field service organization services more than 7,500 generators owned by more than 1,200 customers located throughout the United States, including for multi-site, multi-state customers such as Target Corporation and Verizon Corporation.

 

We recognize discrete revenue streams from service contracts, installation and maintenance services, and we offer service contracts to all owners of power generation and related equipment, whether or not the equipment was originally sold by us. Our service agreements have terms ranging from one to five years in duration, provide us with a recurring revenue stream, and generally yield higher margins as compared to genset equipment sales. These service contracts may also include remote monitoring services that allow owners to be informed of the condition and operations of their equipment at any time and from any place.

 

   5  
 

 

Remote Monitoring and Automated Control

 

We have dedicated considerable resources to developing and engineering our proprietary remote monitoring and automated control system for onsite power generation. We believe this system enables us to provide a technologically superior service program that benefits our customer from a cost and quality standpoint. In addition, we have developed specialized asset management and auditing tools to more efficiently and cost effectively provide our customers with detailed information about their onsite power systems.  We believe these tools provide us with an advantage over service companies that do not have these technologies, allowing us to compete for work more efficiently, maintain higher service levels and realize higher margins by using these tools.

 

Our monitoring and control system performs 24/7,  capturing and monitoring data from up to 100 critical points and functions on the genset,  PSG, ATS and UPS, from metering electrical output to emissions.  This data is displayed in continuously updated, fully customizable, easy-to-read web-based reporting that provide a complete picture of our customers’ power generation system condition. By tracking and trending real-time performance indicators in combination with the ability to remotely test, start and stop onsite power systems, our network operations center is able to avert potential failures before they occur and immediately respond to emergency situations before a customer calls. Our monitoring and control system is instrumental to ensure that our servicing programs are being administered appropriately in order to optimize system reliability on behalf of our customers. In addition, because our system is completely scalable, we are able to monitor one to thousands of generators nationwide, a solution which is ideally-suited to service our national account customers.

 

Our customers use our monitoring and control system for access to our monitoring dashboard, to view generator performance in real-time, to receive alerts and notifications, track work orders and submit support requests. These capabilities have been combined with automated electronic audit and inventory reporting to form a comprehensive asset management program for our customers, enabling them to quickly and efficiently record, categorize and retrieve vital information about their power generation assets across their facilities. We believe the advantage of these reporting systems is that they help us and our customers to better protect their equipment, while increasing system reliability in times of need and reducing ongoing operating costs for service and repairs through preventative maintenance.

 

Business Strategy

 

We believe we have established a stable platform from which to develop and grow our business lines, revenues, net income and shareholder value. We intend to expand rapidly over the next several years through a two-pronged strategy. First, we are focused on internal growth through operating efficiencies, new product development, customer focus and our continued migration towards more highly-engineered products and specialized services. We intend to significantly increase the percentage of our sales derived from engineered-to-order products and differentiated services and believe this can be accomplished by targeting market segments, such as data centers and independent power producers, which have growth characteristics exceeding the norm in our industry. The second element of our growth strategy is to pursue strategic acquisitions that provide us with complementary product and service offerings, new sales channels, end-markets and scalable operations.

 

Over the last five years, through internal development and acquisitions, we believe we have broadened the array and sophistication of our product and service offerings.  Our strategy is to continue to expand the portfolio of solutions we offer in order to address more elements of every electrical infrastructure project. We believe this approach makes us more relevant to our customers, allows us to compete more effectively and increases the number of sales opportunities for our products and solutions.

 

We intend to build our revenue and net income at rates exceeding industry norms through internal growth initiatives and complementary acquisitions. Accomplishing these financial goals will be dependent on a number of factors including our ability to execute the following strategies and actions:

 

  Evolving from a product-oriented to a customer and market-centric, solutions-oriented organization;
  Establishing a scalable organizational infrastructure to support our expected growth;
  Driving incremental sales in new channels and markets through our corporate selling group;
  Investing in our capabilities to provide progressively more advanced equipment and service solutions;
  Continuously applying our manufacturing and service resources to their highest and best uses;
  Capitalizing on inter-segment manufacturing efficiencies and shared utilization of our facilities;
  Expanding our margins through outsourcing production for our standard products;
  Combining and streamlining our business unit supply chains and administrative functions;
  Improving business processes to deliver consistency, quality and value to our customers.

 

   6  
 

 

T&D Solutions Segment

 

We intend to accomplish our growth objectives within our T&D Solutions business by emphasizing our capabilities in the following areas:

 

  OEM Equipment Solutions ‒ Continue to invest in engineering resources and product development to increase our pipeline of recurring order customers that integrate our magnetic subassemblies and/or components into the products they sell. Our key focus areas for this solution category include providers of motor control/drive systems, factory automation equipment, power distribution units and UPS systems for data centers, HVAC systems, and power quality and conditioning equipment. 
  Medium Voltage Dry-type Transformers ‒ We acquired this competence in 2011.  Growth in this product class will be predicated on expanding our market penetration, particularly in the U.S. where in 2013 we began adding dedicated medium voltage and liquid-filled transformer sales personnel and new independent sales representatives.
   Liquid-filled Transformers ‒ Sales of more network, subsurface, small and medium power transformers to new and existing utility and industrial customers, particularly in the U.S. In 2012 we completed a facility expansion in order to increase our production capacity for these higher voltage and more complex solutions.
 

Paralleling Switchgear (PSG) ‒ Increase our product range to include traditional low voltage and medium voltage, metal clad and metal enclosed switchgear, to be used both in conventional electrical distribution applications, in unitized substations, as well as for supply to our Critical Power business.

 

We believe we excel at large projects for mission critical facilities that require sophisticated standby and primary power redundancy schemes. These projects generally demand higher engineering content due to the necessary customization of the switchgear and related controls, which we believe provides us a stronger basis upon which to compete than in more straight-forward applications.  We intend to grow our sales in this product line by adding to our staff of professional sales persons and growing our network of independent manufacturers’ representatives who specialize in critical power.

 

Critical Power Segment

 

Within our Critical Power business, we intend to accomplish our growth objectives by implementing the following business initiatives:

 

  National Service Accounts ‒ We intend to increase the number of national account customers we have by leveraging our scalable, nationwide network of partners which allows us to service standby power systems anywhere in the United States. We are actively marketing our preventive maintenance and technology-enabled monitoring and control services to new national accounts including: major national retailers, telecommunications companies, data centers, banks, hospitals and health care facilities, educational institutions and property management companies.
  Power generation equipment ‒ Increase our sales of power generation and associated equipment in our existing and new market territories by recruiting qualified, professional sales people, and by broadening the range of ancillary equipment options they have available for sale, including related equipment solutions manufactured by us. We believe that these sales will also create opportunities for us to secure long-term service contracts and deploy our monitoring technologies, programs that generate recurring revenue at attractive profit margins.

 

Acquisitions

 

We believe a disciplined acquisition program is a key component to accelerating our growth and we intend to acquire businesses that broaden the range of customer solutions we provide, increase our market share or expand our geographic reach. In addition to switchgear and transformer manufacturers, we also intend to acquire manufacturing and service businesses focused on other technically-advanced, customized, ancillary or complementary products that address market segments where we seek further penetration, such as in data centers, backup power equipment and service, traction power, renewable energy and natural resources. We operate in a highly fragmented industry that is served by a few global diversified electrical equipment manufacturers and numerous small manufacturing companies that provide niche products and services to various sub-segments of the power transmission and distribution market. We favor candidates that have competencies and business characteristics similar to our own, and those that we expect will benefit from some of the major trends affecting our industry. Our acquisitions since 2010 are examples of the implementation of our acquisition strategy.

 

Our Industry

 

The market for our largest business segment, electrical T&D equipment, is substantial and has grown over the last several decades. According to a February 2015 study by The Freedonia Group, a market research firm, total U.S. demand for electric T&D equipment was $25.5 billion in 2014 and was distributed by product category as follows: switchgear (54%), transformers (33%), meters (7%) and pole/transmission line hardware (6%). The Freedonia Group forecasts demand for switchgear and for transformers to climb 6.1%  and 4.5% annually to $28.9 billion collectively in 2019,  as compared to 5.5% and 2.0% annual growth for these categories between 2009 and 2014, driven by rising utilization of renewable energy sources and increasing demand from the industrial and non-utility generator markets.

 

   7  
 

 

Most of our business today consists of manufacturing power, distribution and non-utility transformers, although we have become increasingly engaged in producing conventional and certain specialty categories of electrical switchgear. Utilities, industrial and commercial firms purchase transformers to replace old equipment, maintain system reliability, achieve efficiency improvements and for substation or grid expansion. Demand is also sensitive to overall economic conditions, particularly with respect to the level of industrial production and investment in commercial and residential construction. Other market demand factors include voltage conversion, voltage unit upgrades, electrical equipment failures, higher energy costs, stricter environmental regulations and investment in sources of renewable and distributed energy generation.

 

The market for switchgear and related equipment is significantly larger and more complex given the number and classes of solutions available. Within our Critical Power segment, we believe that our PSG and ATS switchgear offerings, together with our service programs for power generation and ancillary equipment, addresses annual U.S. demand exceeding $2.0 billion.

 

 The market for T&D equipment and Critical Power solutions is very fragmented due to the range of equipment types, electrical and mechanical properties, technological standards and service parameters required by different categories of end users for their specific applications. Many orders are custom-engineered and tend to be time-sensitive since other critical work is frequently being coordinated around the customer’s electrical equipment installation. The vast majority of North American demand for the types of solutions we provide is satisfied by thousands of producers and service companies in the U.S. and Canada.

 

We believe several of the key industry trends supporting future growth in our industry are as follows:

 

  Aging and Overburdened North American Power Grid — The aging and overburdened North American power grid is expected to require significant capital expenditures to upgrade the existing infrastructure over the next several years to maintain adequate levels of reliability and efficiency. Significant capital investment will be required to relieve congestion, meet growing demand, achieve targets for efficiency, emissions and use of renewable sources, and to replace components of the U.S. power grid operating at, near or past their planned service lives.
     
  Increasing Long-Term Demand for Electricity and Reliable Power — The Department of Energy’s Energy Information Administration, or EIA, forecasts that total electricity use in the U.S. will increase by approximately 28% from 2011 to 2040. This increase is driven by anticipated population growth, economic expansion, increasing dependence on computing power throughout the economy and the increased use of electrical devices in the home. In order to meet growing demand for electricity in North America, substantial investment in increased electrical grid capacity and efficiency will be required, as well as the addition of specialized equipment to help ensure the reliability and quality of electricity for critical applications. In response to these challenges, there is an increasing trend among commercial and industrial companies to invest in on-site power sources, both for standby purposes in the event of a catastrophic power outage, or to reduce the amount of electricity they draw from the utility grid during peak periods.
     
 

Growth in Critical Power Applications and the Data Center Market — The number of mission-critical facilities, sites where a power disturbance or outage could cause failure of business operations, safety concerns or regulatory non-compliance, continues to grow exponentially worldwide. In the U.S., the single largest driver for demand in critical power applications is the data center market, followed by the health care industry. The amount of information managed by data centers is expected to grow, fueled by increasing needs for data storage (for corporate data, content delivery, social networking, handheld devices, online retail and gaming) and the information technology evolution (cloud computing and outsourced hosting). Coinciding with demand for mission-critical facilities is the need for efficient, reliable primary power to support their essential applications, and for backup generator plants in case the utility feed becomes unavailable. Electricity is the highest operating cost of a data center, a factor supporting investment in on-site alternative energy systems to reduce peak-demand expenses. These systems require paralleling switchgear, such as we provide, operated by hardware embedded with sophisticated programming and logic to synchronize multiple power sources reliably and efficiently.

 

Customers

 

For the year ended December 31, 2016 approximately 27% of our sales were to Canadian customers, including many of Canada’s electrical utilities, municipal power systems, large industrial companies, engineering and construction firms and a number of electrical distributors. Another 72% of our sales in 2016 were to U.S. customers, represented in large part by companies involved in commercial construction. Less than 1% of our sales were to export customers primarily serving the Central and Latin American markets. During the year ended December 31, 2016, we sold our electrical equipment and services to over 2,200 individual customers and our twenty largest customers represented approximately 51% of our consolidated revenue.

 

   8  
 

 

Approximately 15% and 10% of our sales in the years ended December 31, 2016 and 2015, respectively, were made to Siemens and its affiliated companies. Our pricing agreement with Siemens does not obligate Siemens to purchase transformers from us in quantities consistent with the past or at all.

 

While the loss of a significant number of customers would have a material adverse effect on our business, aside from Siemens, we do not believe that the loss of any specific customer would have a material adverse effect on our business.

 

Marketing, Sales and Distribution

 

A substantial portion of the transformers manufactured by us, and most of the switchgear products we offer, are sold directly to customers by our 18 full-time marketing and sales personnel and 6 members of our executive management team operating from our office locations in the U.S. and Canada. Our products are also sold through our network of more than 64 independent sales agencies throughout North America that sell primarily to full-line electrical distributors and to maintenance, repair and overhaul organizations. Our direct sales force markets to end users and to third parties, such as original equipment manufacturers and engineering firms that prescribe the specifications and parameters that control the applications of our products.

 

Sales Backlog

 

Backlog reflects the amount of revenue we expect to realize upon the shipment of customer orders for our products that are not yet complete or for which work has not yet begun. Our sales backlog as of December 31, 2016 was approximately $38.6 million, as compared to $28.7 million as of December 31, 2015. We anticipate that most of our current backlog will be delivered during 2017. Orders included in our sales backlog are represented by customer purchase orders and contracts that we believe to be firm.

 

Competition

 

We experience intense competition from a large number of electrical equipment manufacturers and from distributors and servicers of such equipment. The number and size of our competitors varies considerably by product line and service category, with many of our competitors tending to be small, highly specialized or focused on a certain geographic market area or customer. However, several of our competitors have substantially greater financial and technical resources than us, including some of the world’s largest electrical products and industrial equipment manufacturing companies. A representative list of our competitors in our T&D Solutions segment includes ABB Ltd., Carte International, Inc., Eaton Corporation plc, General Electric Company, Schneider Electric SA, Hammond Power Solutions Inc., Howard Industries, Inc. and Partner Technologies, Inc. In the sale of onsite power systems and service, our Critical Power segment competes with larger, more established regional companies that represent Caterpillar, Cummins, Kohler and other generator manufacturers.

 

We believe that we compete primarily on the basis of technical support and application expertise, engineering, manufacturing and service capabilities, equipment rating, quality, scheduling and price. In all our businesses, our objective is to focus our efforts on more specialized, challenging and complex applications. Accordingly, a critical element to the success of our business is responsiveness and flexibility in providing custom-engineered solutions to satisfy customer needs. We believe that our strongest product niches are in the manufacture and design of small power and distribution electrical transformers, custom-manufactured panel board and switchboard products and in paralleling switchgear solutions for on-site power applications serving data centers, hospitals and other businesses with critical power needs. As a result of our long-time presence in the industry, we possess a number of special designs and libraries of programming code for our equipment that were engineered and developed specifically for our customers. We believe these factors give us a competitive advantage and that they are a major contributor to our frequency of repeat customer orders and the longevity of our customer relationships.

 

Raw Materials and Suppliers

 

The principal raw materials purchased by us are core steel, copper wire, aluminum strip, insulating materials including transformer oil and sheet metal. We also purchase certain electrical components from a variety of suppliers including bushings, switches, fuses, protectors and circuit breakers. These raw materials and components are available from and supplied by numerous sources at competitive prices, although there are more limited sources of supply for electrical core steel and transformer oil. Unanticipated increases in raw material prices or disruptions in supply could increase production costs and adversely affect our profitability. We attempt to minimize the effect on our profit margins of unanticipated changes in the prices of raw materials by including index clauses in our customer contracts that allow us to increase or reduce our prices if the costs of raw materials unexpectedly rise or decrease. Approximately 31% of our annual sales are made pursuant to contracts that contain such index clauses, which, subject to various formulae and limitations, permit us to adjust the final prices we charge. We do not anticipate any significant difficulty in satisfying our raw material requirements on reasonable terms and have not experienced any such difficulty in the past several years. Our largest suppliers during the year ended December 31, 2016 included Sumitomo Corporation, Generac, Essex Group, Metelec Ltée and Rea Magnet Wire Co. Inc. and our distribution transformer supplier from a low cost production location in Asia.

 

   9  
 

 

Employees

 

As of December 31, 2016, we had 415 employees consisting of 129 salaried staff and 286 hourly workers. Our hourly employees located at our plant in Farnham, Quebec, Canada are covered by a collective bargaining agreement with a provincial labor union that expires in March 2017. This agreement will not be renewed as we are planning to relocate our production from this facility to our lower cost facility in Reynosa Mexico. Our hourly employees located at our plant in Granby, Quebec, Canada are covered by a collective bargaining agreement with the United Steel Workers of America Local 9414 that expires in May 2020. The hourly employees located at our manufacturing facility in Reynosa, Mexico are also covered by a collective bargaining agreement with a local labor union that has an indefinite term, subject to annual review and negotiation of key provisions. In addition, certain of our hourly employees located at our manufacturing facility in Santa Fe Springs, California are covered by a collective bargaining agreement with Local Union 1710 of the International Brotherhood of Electrical Workers, AFL-CIO that expires in June 2019.

 

Environmental

 

We are subject to numerous environmental laws and regulations concerning, among other areas, air emissions, discharges into waterways and the generation, handling, storing, transportation, treatment and disposal of waste materials. These laws and regulations are constantly changing and it is impossible to predict with accuracy the effect they may have on us in the future. Like many other industrial enterprises, our manufacturing operations entail the risk of noncompliance, which may result in fines, penalties and remediation costs, and there can be no assurance that such costs will be insignificant. To our knowledge, we are in substantial compliance with all federal, state, provincial and local environmental protection provisions, and believe that the future compliance cost should not have a material adverse effect on our capital expenditures, net income or competitive position. However, legal and regulatory requirements in these areas have been increasing and there can be no assurance that significant costs and liabilities will not be incurred in the future due to regulatory noncompliance.

 

Corporate History

 

We were originally formed in the State of Nevada in 2008. On November 30, 2009, we merged with and into Pioneer Power Solutions, Inc., a Delaware corporation, for the sole purpose of changing our state of incorporation from Nevada to Delaware and changing our name to “Pioneer Power Solutions, Inc.” On September 24, 2013, we completed an underwritten public offering and our common stock began trading on the Nasdaq Capital Market under the symbol PPSI.

 

Available Information

 

Our corporate website is located at www.pioneerpowersolutions.com. On the investor relations section of our website, we make available, free of charge, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports as soon as reasonably practicable after we electronically file them with or furnish them to the SEC. You may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C. 20549. You may obtain information on the operation of the SEC’s Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements and other information regarding issuers, such as us, that file electronically with the SEC at www.sec.gov.

 

We webcast our earnings calls and certain events we participate in with members of the investment community on our investor relations website. Additionally, we provide notifications of news or announcements regarding our financial performance, including SEC filings, investor events and press and earnings releases as part of the investor relations section of our website. Further corporate governance materials, including our Corporate Governance Guidelines, charters of our Board Committees and our Code of Business Ethics and Conduct, are also available under the heading “Corporate Governance” on the investor relations portion of our website. The contents of and the information on or accessible through our corporate website, including the investor relations portion of our website, is not a part of, and is not intended to be incorporated into, this report or any other report or document we file with or furnish to the SEC, and any references to our website are intended to be an inactive textual references only.

 

ITEM 1A.  RISK FACTORS

 

Investing in our common stock involves a high degree of risk. Before investing in our common stock you should carefully consider the following risks, together with the financial and other information contained in this Annual Report on Form 10–K for the year ended December 31, 2016 and our other periodic filings with the Securities and Exchange Commission. Additional risks and uncertainties that we are unaware of may become important factors that affect us. If any of the following events occur, our business, financial conditions and operating results may be materially and adversely affected. In that event, the trading price of our common stock may decline, and you could lose all or part of your investment.

 

   10  
 

 

Risks Relating to Our Business and Industry

 

We are vulnerable to economic downturns in the commercial construction market, which may reduce the demand for some of our products and adversely affect our sales, net income, cash flow or financial condition.

 

A large portion of our business involves sales of our products in connection with commercial and industrial construction. Our sales to this sector are affected by the level of discretionary business spending. During economic downturns in this sector, the level of business discretionary spending may decrease. This decrease in spending will likely reduce the demand for some of our products and may adversely affect our sales, net income, cash flow or financial condition.

 

The commercial and industrial building and maintenance sectors began to experience a significant decline in 2008. The downturn in these segments contributed to a decline in the demand for our T&D Solutions, particularly our standard distribution transformers and general purpose switchgear products, as well as a decline in demand for power generation equipment distributed by our Critical Power reporting unit. We cannot predict the timing, duration or severity of another such downturn in these segments which may adversely impact sales, net income and cash flow.

 

Our operating results may vary significantly from quarter to quarter, which makes our operating results difficult to predict and can cause our operating results in any particular period to be less than comparable quarters and expectations from time to time.

 

Our quarterly results may fluctuate significantly from quarter to quarter due to a variety of factors, many of which are outside our control and have the potential to materially and adversely affect our results. Factors that affect our operating results include the following:

 

  the size, timing and terms of sales and orders, especially large customer orders;
  variations caused by customers delaying, deferring or canceling purchase orders or making smaller purchases than expected;
  the timing and volume of work under new agreements;
  the spending patterns of customers;
  customer orders received;
  a change in the mix of our products having different margins;
  a change in the mix of our customers, contracts and business;
  increases in design and manufacturing costs;
  the length of our sales cycles;
  the rates at which customers renew their contracts with us;
  changes in pricing by us or our competitors, or the need to provide discounts to win business;
  a change in the demand or production of our products caused by severe weather conditions;
  our ability to control costs, including operating expenses;
  losses experienced in our operations not otherwise covered by insurance;
  the ability and willingness of customers to pay amounts owed to us;
  the timing of significant investments in the growth of our business, as the revenue and profit we hope to generate from those expenses may lag behind the timing of expenditures;
  costs related to the acquisition and integration of companies or assets;
  general economic trends, including changes in equipment spending or national or geopolitical events such as economic crises, wars or incidents of terrorism; and
  future accounting pronouncements and changes in accounting policies.

 

Accordingly, our operating results in any particular quarter may not be indicative of the results that you can expect for any other quarter or for an entire year.

 

Our industry is highly competitive.

 

The electrical equipment manufacturing industry is highly competitive. Principal competitors in our markets include ABB Ltd., Carte International, Inc., Eaton Corporation plc, Emerson Electric Company, General Electric Company, Hammond Power Solutions Inc., Howard Industries, Inc., Partner Technologies, Inc., and Schneider Electric SA. Many of these competitors, as well as other companies in the broader electrical equipment manufacturing and service industry where we expect to compete, are significantly larger and have substantially greater resources than we do and are able to achieve greater economies of scale and lower cost structures than us and may, therefore, be able to provide their products and services to customers at lower prices than we are able to. Moreover, our competitors could develop the expertise, experience and resources to offer products that are superior in both price and quality to our products. While we seek to compete by providing more customized, highly-engineered products, there are few technical or other barriers to prevent much larger companies in our industry from putting more emphasis on this same strategy. Similarly, we cannot be certain that we will be able to market our business effectively in the face of competition or to maintain or enhance our competitive position within our industry, maintain our customer base at current levels or increase our customer base. Our inability to manage our business in light of the competitive forces we face could have a material adverse effect on our results of operations.

 

   11  
 

 

Because we currently derive a significant portion of our revenues from one customer, any decrease in orders from this customer could have an adverse effect on our business, financial condition and operating results.

 

We depend on Siemens for a large portion of our business, and any change in the level of orders from Siemens, has, in the past, had a significant impact on our results of operations. Siemens accounted for 15% and 10% of our net sales in the years ended December 31, 2016 and 2015, respectively. In addition, our pricing agreement with Siemens does not obligate Siemens to purchase transformers from us in quantities consistent with the past or at all. If Siemens were to significantly cancel, delay or reduce the amount of business it does with us for any reason, there would be a material adverse effect on our business, financial condition and operating results.

 

The departure or loss of key personnel could disrupt our business.

 

We depend heavily on the continued efforts of Nathan J. Mazurek, our principal executive officer, and on other senior officers who are responsible for the day-to-day management of our four operating subsidiaries. In addition, we rely on our current electrical and mechanical design engineers, along with trained coil winders, many of whom are important to our operations and would be difficult to replace. We cannot be certain that any of these individuals will continue in their respective capacities for any particular period of time. The departure or loss of key personnel, or the inability to hire and retain qualified employees, could negatively impact our ability to manage our business.

 

Any acquisitions that we have completed, or may complete in the future, may not perform as planned and could disrupt our business and harm our financial condition and operations.

 

In an effort to effectively compete in the specialty electrical equipment manufacturing and service businesses, where increasing competition and industry consolidation prevail, we have sought to acquire complementary businesses in the past and will continue to do so in the future. In the event of any future acquisitions, we could:

 

  issue additional securities that would dilute our current stockholders’ percentage ownership or provide the purchasers of the additional securities with certain preferences over those of common stockholders, such as dividend or liquidation preferences;
  incur debt and assume liabilities; and
  incur large and immediate write-offs of intangible assets, accounts receivable or other assets.

 

These events could result in significant expenses and decreased revenue, which could adversely affect the market price of our common stock. In addition, integrating acquired businesses and completing any future acquisitions involve numerous operational and financial risks. These risks include difficulty in assimilating acquired operations, diversion of management’s attention, and the potential loss of key employees or customers of acquired operations. Furthermore, companies acquired by us may not generate financial results consistent with our management’s plans at the time of acquisition.

 

We may not be able to expand our business through strategic acquisitions, and internal growth initiatives facilitated by acquisitions, which could decrease our profitability.

 

A key element of our strategy is to pursue strategic acquisitions that either expand or complement our business in order to increase revenue and net income. We may not be able to identify additional attractive acquisition candidates on terms favorable to us or in a timely manner. We may require additional debt or equity financing for future acquisitions, which may not be available on terms favorable to us, if at all. Moreover, we may not be able to integrate any acquired businesses into our business or to operate any acquired businesses profitably. Recently acquired businesses may operate at lower profit margins, which could negatively impact our results of operations. Each of these factors may contribute to our inability to grow our business through strategic acquisitions, which could ultimately result in increased costs without a corresponding contemporary increase in revenues, which would result in decreased profitability.

 

If we do not conduct an adequate due diligence investigation of a target business that we acquire, we may be required subsequently to take write downs or write-offs, restructuring, and impairment or other charges that could have a significant negative effect on our financial condition, results of operations and our stock price, which could cause you to lose some or all of your investment.

 

As part of our acquisition strategy, we will need to conduct a due diligence investigation of one or more target businesses. Intensive due diligence is time consuming and expensive due to the operations, accounting, finance and legal professionals who must be involved in the due diligence process. We may have limited time to conduct such due diligence. Even if we conduct extensive due diligence on a target business that we acquire, we cannot assure you that this diligence will uncover all material issues relating to a particular target business, or that factors outside of the target business and outside of our control will not later arise. If our diligence fails to identify issues specific to a target business or the environment in which the target business operates, we may be forced to write-down or write-off assets, restructure our operations, or incur impairment or other charges that could result in us reporting losses. Even though these charges may be non-cash items and not have an immediate impact on our liquidity, the fact that we report charges of this nature could contribute to negative market perceptions about us or our common stock. In addition, charges of this nature may cause us to violate net worth or other covenants that we may be subject to as a result of assuming pre-existing debt held by a target business or by virtue of our obtaining post-combination debt financing.

 

   12  
 

 

Our revenue may be adversely affected by fluctuations in currency exchange rates.

 

Approximately one-third of our 2017 revenue and a significant portion of our expenditures are expected to be derived or spent in Canadian dollars. However, we report our financial condition and results of operations in U.S. dollars. As a result, fluctuations between the U.S. dollar and the Canadian dollar will impact the amount of our revenues and net income. For example, if the Canadian dollar appreciates relative to the U.S. dollar, the fluctuation will result in a positive impact on the revenues that we report. However, if the Canadian dollar depreciates relative to the U.S. dollar, which was the case during 2015 and 2016, there will be a negative impact on the revenues we report due to such fluctuation. It is possible that the impact of currency fluctuations will result in a decrease in reported consolidated sales even though we may have experienced an increase in sales transacted in the Canadian dollar. Conversely, the impact of currency fluctuations may result in an increase in reported consolidated sales despite declining sales transacted in the Canadian dollar. The exchange rate from the U.S. dollar to the Canadian dollar has fluctuated substantially in the past and may continue to do so in the future. Though we may choose to hedge our exposure to foreign currency exchange rate changes in the future, there is no guarantee such hedging, if undertaken, will be successful.

 

We may be unable to generate internal growth.

 

Our ability to generate internal growth will be affected by, among other factors, our ability to attract new customers, increases or decreases in the number or size of orders received from existing customers, hiring and retaining skilled employees and increasing volume utilizing our existing facilities. Many of the factors affecting our ability to generate internal growth may be beyond our control, and we cannot be certain that our strategies will be implemented with positive results or that we will be able to generate cash flow sufficient to fund our operations and to support internal growth. If we do not achieve internal growth, our results of operations will suffer and we will likely not be able to expand our operations or grow our business.

 

Fluctuations in the price and supply of raw materials used to manufacture our products may reduce our profits.

 

Our raw material costs represented approximately 60% and 59% of our revenues for the years ended December 31, 2016 and 2015, respectively. The principal raw materials purchased by us are electrical core steel, copper wire, aluminum strip and insulating materials including transformer oil. We also purchase certain electrical components from a variety of suppliers including bushings, switches, fuses and protectors. These raw materials and components are available from, and supplied by, numerous sources at competitive prices, although there are more limited sources of supply for electrical core steel and transformer oil. Unanticipated increases in raw material prices or disruptions in supply could increase production costs and adversely affect our profitability. We cannot provide any assurances that we will not experience difficulties sourcing our raw materials in the future.

 

Our Critical Power solutions segment, through our wholly-owned subsidiary Titan Energy Systems Inc., currently derives a significant portion of its revenues pursuant to a distributor agreement with Generac; a termination or expiration of our distributor agreement with Generac , or any reduction in market acceptance of products sold by us pursuant to the distributor agreement could have an adverse effect on our financial condition and operating results.  

 

Under the terms of our distributor agreement with Generac, we are responsible for marketing, distributing and servicing the Generac Industrial Power line of products in the states Minnesota, Iowa, Illinois, Wisconsin and Nebraska. Our agreement has an initial term expiring on March 31, 2018, and automatically expires unless extended by Generac, with 90 days’ prior notice, for at least an additional one-year (1) periods. Approximately 37% of Titan’s business involves the sale of Generac products. As such, Titan’s business is dependent on market acceptance of Generac products. We believe that Generac has a solid reputation as a manufacturer, with excellent brand recognition and customer support and a growing market share in many of the markets it serves. However, there can be no assurance that Generac will be able to maintain its reputation and grow its market position in the future. If Generac is unsuccessful in developing and enhancing its product lines to meet evolving and sophisticated customer needs, is unable to maintain the quality of its products, or if it is unable to provide its products at competitive prices, the market acceptance for Generac products may deteriorate over time. Any resulting decrease in the demand for Generac products could have a material adverse impact on our business, results of operations and future prospects.

 

We are also dependent on Generac for the timely supply of parts and equipment to fulfill its deliveries to our customers and meet the requirements of our service maintenance contracts. From time to time, during periods of intense demand, Generac finds it necessary to allocate its supply of particular products among its dealers. Such allocations of supply have not, in the past, proven to be a significant impediment to us in conducting our business. However, there can be no assurance that Generac will continue to supply its products in the quantities and timeframes required by our customers.  While delays in the availability of product supply in sufficient quantities may adversely affect our business, results of operations and financial condition, historically this has not been an issue for us.

 

   13  
 

 

We have, and expect to continue to have, credit facilities with restrictive loan covenants that may impact our ability to operate our business and to pursue our business strategies, and our failure to comply with these covenants could result in an acceleration of our indebtedness.

 

We will continue to rely on our credit facilities with Bank of Montreal (“BMO”) for a significant portion of the working capital to operate our business and execute our strategy. These credit facilities contain certain covenants that restrict our ability to, among other things:

 

  undergo a change in control;
  incur new indebtedness or other obligations, subject to certain exceptions;
  pay cash dividends;
  create or incur new liens, subject to certain exceptions;
  make new acquisitions or investments in other entities, subject to certain exceptions;
  wind up, liquidate or dissolve our affairs;
  change the nature of our core business;
  alter our capital structure in a manner that would be materially adverse to our lenders; and
  make investments or advancements to affiliated or related companies.

 

The majority of the liquidity derived from our credit facilities is based on availability determined by a borrowing base. Specifically, the availability of credit is dependent upon eligible receivables, inventory and certain liens. We may not be able to maintain adequate levels of eligible assets to support our required liquidity.

 

In addition, our credit facilities require us to meet certain financial ratios, including working capital ratios, EBITDA levels and effective tangible net worth levels. Our ability to meet these financial provisions may be affected by events beyond our control. If, as or when required, we are unable to repay, refinance or restructure our indebtedness under, or amend the covenants contained in, our credit facilities, our lenders could institute foreclosure proceedings against the assets securing borrowings under those facilities, which would harm our business, financial condition and results of operations.

 

The indebtedness under our credit facilities with BMO is secured by substantially all of our consolidated assets. As a result of these security interests, such assets would only be available to satisfy claims of our general creditors or to holders of our equity securities if we were to become insolvent to the extent the value of such assets exceeded the amount of our indebtedness and other obligations. In addition, the existence of these security interests may adversely affect our financial flexibility.

 

Indebtedness under our credit facilities with BMO is secured by a lien on substantially all of our assets. Accordingly, if an event of default were to occur under our credit facilities, BMO would have a prior right to our assets, to the exclusion of our general creditors in the event of our bankruptcy, insolvency, liquidation, or reorganization. In that event, our assets would first be used to repay in full all indebtedness and other obligations secured by them (including all amounts outstanding under our senior secured credit agreement), resulting in all or a portion of our assets being unavailable to satisfy the claims of our unsecured indebtedness. Only after satisfying the claims of our unsecured creditors and our subsidiaries’ unsecured creditors is any amount available for our equity holders. The pledge of these assets and other restrictions may limit our flexibility in raising capital for other purposes. Because substantially all of our assets are pledged under these financing arrangements, our ability to incur additional secured indebtedness or to sell or dispose of assets to raise capital may be impaired, which could have an adverse effect on our financial flexibility.

 

We depend upon the availability of capital under our revolving credit facilities and term loans with BMO to finance our operations. Any additional financing that we have requested from BMO may not be available on favorable terms or at all.

 

In addition to cash flow provided by operations, we finance our working capital and general corporate needs through our Canadian Facilities and U.S. Facilities with BMO. On April 29, 2016 we and BMO restated and amended these credit agreements to revise covenants and funding amounts to finance our cash requirements for anticipated operating activities, restructuring and integration plans, capital improvements and scheduled principal repayments of long-term debt. On March 15, 2017, the expiration date of this credit facility was extended until July 31, 2018.

 

   14  
 

 

We may not be able to fully realize the revenue value reported in our backlog.

 

We routinely have a backlog of work to be completed on contracts representing a significant portion of our annual sales. As of December 31, 2016, our order backlog was $38.6 million. Orders included in our backlog are represented by customer purchase orders and service contracts that we believe to be firm. Backlog develops as a result of new business taken, which represents the revenue value of new customer orders received by us during a given period. Backlog consists of customer orders that either (1) have not yet been started or (2) are in progress and are not yet completed. In the latter case, the revenue value reported in backlog is the remaining value associated with work that has not yet been completed. From time to time, customer orders are canceled that appeared to have a high certainty of going forward at the time they were recorded as new business taken. In the event of a customer order cancellation, we may be reimbursed for certain costs but typically have no contractual right to the total revenue reflected in our backlog. In addition to us being unable to recover certain direct costs, canceled customer orders may also result in additional unrecoverable costs due to the resulting underutilization of our assets.

 

We are subject to pricing pressure from our larger customers.

 

We face significant pricing pressures in all of our business segments from our larger customers, including Siemens. Because of their purchasing size, our larger customers can influence market participants to compete on price terms. Such customers also use their buying power to negotiate lower prices. If we are not able to offset pricing reductions resulting from these pressures by improved operating efficiencies and reduced expenditures, those price reductions may have an adverse impact on our financial results.

 

Deterioration in the credit quality of several major customers could have a material adverse effect on our operating results and financial condition.

 

A significant asset included in our working capital is accounts receivable from customers. If customers responsible for a significant amount of accounts receivable become insolvent or are otherwise unable to pay for products and services, or become unwilling or unable to make payments in a timely manner, our operating results and financial condition could be adversely affected. A significant deterioration in the economy could have an adverse effect on the servicing of these accounts receivable, which could result in longer payment cycles, increased collection costs and defaults in excess of management’s expectations. Deterioration in the credit quality of Siemens or of any other major customers could have a material adverse effect on our operating results and financial condition.

 

We rely on third parties for key elements of our business whose operations are outside our control.

 

We rely on arrangements with third party shippers and carriers such as independent shipping companies for timely delivery of our products to our customers. As a result, we may be subject to carrier disruptions and increased costs due to factors that are beyond our control, including labor strikes, inclement weather, natural disasters and rapidly increasing fuel costs. If the services of any of these third parties become unsatisfactory, we may experience delays in meeting our customers’ product demands and we may not be able to find a suitable replacement on a timely basis or on commercially reasonable terms. Any failure to deliver products to our customers in a timely and accurate manner may damage our reputation and could cause us to lose customers.

 

We also utilize third party distributors and manufacturer’s representatives to sell, install and service certain of our products. While we are selective in whom we choose to represent us, it is difficult for us to ensure that our distributors and manufacturer’s representatives consistently act in accordance with the standards we set for them. To the extent any of our end-customers have negative experiences with any of our distributors or manufacturer’s representatives, it could reflect poorly on us and damage our reputation, thereby negatively impacting our financial results.

 

Our business may face cyber-security risk generally associated with our information technology systems which could materially affect our business, and our results of operations could be materially affected if our information technology systems (or third-party systems we rely on) are interrupted, damaged by unforeseen events, or fail for any extended period of time.

 

We rely on information systems (IS) in our business to obtain, rapidly process, analyze, manage and store data to among other things:

 

maintain and manage our systems to facilitate the purchase and distribution of inventory items from various distribution centers;

 

provide remote monitoring and automated control to our customers;

 

receive, process and ship orders on a timely basis;

 

manage the accurate billing and collections from our customers.

 

Information security risks have generally increased in recent years, and a cyberattack that bypasses our IS security systems causing an IS security breach may lead to a material disruption of our business operations and/or the loss of business information resulting in a material effect on our business.

 

In addition, we develop products and provide services to our customers that are technology-based, and a cyberattack that bypasses the IS security systems of our products or services causing a security breach and/or perceived security vulnerabilities in our products or services could also cause significant reputational harm, and actual or perceived vulnerabilities may lead to claims against us by our customers. Perceived or actual security vulnerabilities in our products or services, or the perceived or actual failure by us or our customers who use our products to comply with applicable legal requirements, may not only cause us significant reputational harm, but may also lead to claims against us by our customers and involve fines and penalties, costs for remediation, and settlement expenses.

 

Our information systems also utilize certain third party service organizations that manage a portion of our information systems, and our business may be materially affected if these third party service organizations are subject to an IS security breach. Risks associated with these and other IS security breaches may include, among other things:

 

future results could be materially affected due to theft, destruction, loss, misappropriation or release of confidential data or intellectual property;

 

operational or business delays resulting from the disruption of information systems and subsequent clean-up and mitigation activities;

 

we may incur claims, fines and penalties, and costs for remediation, or substantial defense and settlement expenses; and

 

negative publicity resulting in reputation or brand damage with our customers, partners or industry peers.

 

We have various insurance policies, covering risks in amounts that we consider adequate. There can be no assurance that the insurance coverage we maintain is sufficient or will be available in adequate amounts or at a reasonable cost. Successful claims for misappropriation or release of confidential or personal data brought against us in excess of available insurance or fines or other penalties assessed or any claim that results in significant adverse publicity against us could have a material adverse effect on our business and our reputation.

  

We may face impairment charges if economic environments in which our business operates and key economic and business assumptions substantially change.

 

Assessment of the potential impairment of property, plant and equipment, goodwill and other identifiable intangible assets is an integral part of our normal ongoing review of operations. Testing for potential impairment of long-lived assets is dependent on numerous assumptions and reflects our best estimates at a particular point in time, which may vary from testing date to testing date. The economic environments in which our businesses operate and key economic and business assumptions with respect to projected product selling prices and materials costs, market growth and inflation rates, can significantly affect the outcome of impairment tests. Estimates based on these assumptions may differ significantly from actual results. Changes in factors and assumptions used in assessing potential impairments can have a significant impact on the existence and magnitude of impairments, as well as the time at which such impairments are recognized. Future changes in the economic environment and the economic outlook for the assets being evaluated could also result in additional impairment charges. Any significant asset impairments would adversely impact our financial results.

 

 15

 

 

Our business requires skilled labor, and we may be unable to attract and retain qualified employees.

 

Our ability to maintain our productivity and profitability will be limited by our ability to employ, train and retain skilled personnel necessary to meet our requirements. We may experience shortages of qualified personnel. We cannot be certain that we will be able to maintain an adequate skilled labor force necessary to operate efficiently and to support our growth strategy or that our labor expenses will not increase as a result of a shortage in the supply of skilled personnel. Labor shortages, increased labor costs or loss of our most skilled workers could impair our ability to deliver on time to our customers (thereby creating a risk that we lose our customers to competition) and would inhibit our ability to maintain our business or grow our revenues, and may adversely impact our profitability.

  

Our business operations are dependent upon our ability to engage in successful collective bargaining with our unionized workforce.

 

If we are unable to renew our collective bargaining agreements, or if additional segments of our workforce become unionized, we may be subject to work interruptions or stoppages. Strikes or labor disputes with our employees may adversely affect our ability to conduct our business.

 

We are subject to the risks of owning real property.

 

We own real property, including the land and buildings at two of our manufacturing locations. The ownership of real property subjects us to risks, including: the possibility of environmental contamination and the costs associated with fixing any environmental problems and the risk of damages resulting from such contamination; adverse changes in the value of the property due to interest rate changes, changes in the neighborhood in which the property is located or other factors; ongoing maintenance expenses and costs of improvements; the possible need for structural improvements in order to comply with zoning, seismic, disability act or other requirements; and possible disputes with neighboring owners or others.

 

Our risk management activities may leave us exposed to unidentified or unanticipated risks.

 

Although we maintain insurance policies for our business, these policies contain deductibles and limits of coverage. We estimate our liabilities for known claims and unpaid claims and expenses based on information available as well as projections for claims incurred but not reported. However, insurance liabilities are difficult to estimate due to various factors and we may be unable to effectively anticipate or measure potential risks to our company. If we suffer unexpected or uncovered losses, any of our insurance policies or programs are terminated for any reason or are not effective in mitigating our risks, we may incur losses that are not covered by our insurance policies or that exceed our accruals or that exceed our coverage limits and could adversely impact our consolidated results of operations, cash flows and financial position.

 

Regulatory, environmental, monetary and other governmental policies could have a material adverse effect on our profitability.

 

 We are subject to international, federal, provincial, state and local laws and regulations governing environmental matters, including emissions to air, discharge to waters and the generation and handling of waste. We are also subject to laws relating to occupational health and safety. The operation of manufacturing plants involves a high level of susceptibility in these areas, and there is no assurance that we will not incur material environmental or occupational health and safety liabilities in the future. Moreover, expectations of remediation expenses could be affected by, and potentially significant expenditures could be required to comply with, environmental regulations and health and safety laws that may be adopted or imposed in the future. Future remediation technology advances could adversely impact expectations of remediation expenses. 

  

We face risks associated with litigation and claims.

 

Our business, results of operations and financial condition could be affected by significant litigation or claims adverse to us. There is a lawsuit filed against us, PCEP, PCEP’s president and a PCEP employee by Myers Power Products, Inc. in January 2016, seeking injunctive relief and compensatory damages of an unspecified unlimited (exceeding $25,000) amount, alleging, among other things, that our employees wrongly used and retained confidential business information of Myers Power Products, Inc. for the benefit of us and PCEP, and that we and PCEP knowingly received and used such confidential business information. See “Business — Legal Proceedings” for more information. Due to the uncertainties of litigation, however, we can give no assurance that we, PCEP and our employees will prevail on any claims made against us, PCEP and our employees in any such lawsuit. Also, we can give no assurance that any other lawsuits or claims brought in the future will not have an adverse effect on our financial condition, liquidity or operating results. Types of potential litigation cases include product liability, contract, employment-related, labor relations, personal injury or property damage, intellectual property, stockholder claims and claims arising from any injury or damage to persons, property or the environment from hazardous substances used, generated or disposed of in the conduct of our business. Adverse outcomes in some or all of these claims may result in significant monetary damages that could adversely affect our ability to conduct our business.

 

 16

 

 

Our international operations subject us to additional risks, which risks and costs may differ in each country in which we do business and may cause our profitability to decline.

 

Most of our products are manufactured at our facilities in Canada and Mexico, and we depend on a number of suppliers for raw materials and component parts that are located outside of the U.S., including Asia and Western Europe. We generate a significant portion of our revenue from our operations in Canada and currently derive most of our revenue in the U.S. from products we manufacture in Mexico and source internationally. Our international operations are subject to a variety of risks that we do not face in the U.S., and that we may face only to a limited degree in Canada, including:

 

  building and managing highly experienced foreign workforces and overseeing and ensuring the performance of foreign subcontractors;
  increased travel, infrastructure and legal and compliance costs associated with multiple international locations;
  additional withholding taxes or other taxes on our foreign income, and tariffs or other restrictions on foreign trade or investment;
  imposition of, or unexpected adverse changes in, foreign laws or regulatory requirements, many of which differ from those in the U.S.;
  changes in foreign currency exchange rates, principally fluctuations in the Canadian dollar, Indian rupee and Mexican peso;
  longer payment cycles for sales in some foreign countries and potential difficulties in enforcing contracts and collecting accounts receivable;
  difficulties in repatriating overseas net income;
  general economic conditions in the countries in which we operate; and
  political unrest, civil disturbances, corruption, crime, war, incidents of terrorism, or responses to such events.

 

We may be unable to maintain policies and strategies that will be effective in managing these risks in each country where we do business. Our failure to manage these risks could cause us to fail to reap our investments in these markets and could harm our international operations, reduce our international sales and increase our costs, thus adversely affecting our international and overall business, financial condition and operating results.

 

Market disruptions caused by domestic or international financial crises could affect our ability to meet our liquidity needs at a reasonable cost and our ability to meet long-term commitments, which could adversely affect our financial condition and results of operations.

 

We rely on credit facilities with our lenders, amongst other avenues, to satisfy our liquidity needs. Disruptions in the domestic or international credit markets or deterioration of the banking industry’s financial condition (such as occurred beginning in 2008), may discourage or prevent our lenders and other lenders from meeting their existing lending commitments, extending the terms of such commitments or agreeing to new commitments, such as for acquisitions or to refinance existing credit facilities. Market disruptions may also limit our ability to issue debt securities in the capital markets. We can provide no assurances that our lenders or any other lenders we may have will meet their existing commitments or that we will be able to access the credit markets in the future on terms acceptable to us or at all.

 

Longer term disruptions in the domestic or international capital and credit markets as a result of uncertainty, reduced financing alternatives or failures of significant financial institutions could adversely affect our access to the liquidity needed for our business. Any disruption could require us to take measures to conserve cash until the market stabilizes or until alternative financing can be arranged. Such measures could include deferring capital expenditures and reducing other discretionary expenditures. Market disruptions could cause a broad economic downturn that may lead to increased incidence of customers’ failure to pay for services delivered, which could adversely affect our financial condition, results of operations and cash flow.

 

Capital market disruptions could result in increased costs related to variable rate debt. As a result, continuation of market disruptions could increase our interest expense and adversely impact our results of operations. Disruption in the capital markets and its actual or perceived effects on particular businesses and the greater economy also adversely affects the value of the investments held within our pension plans. Significant declines in the value of the investments held within our pension plans may require us to increase contributions to those plans in order to meet future funding requirements if the actual asset returns do not recover these declines in value in the foreseeable future. These trends may also adversely impact our results of operations, net cash flows and financial positions, including our stockholders’ equity.

 

 17

 

 

Risks Relating to Our Organization

 

Our common stock is listed on the Nasdaq Capital Market, and we take advantage of the “controlled company” exemption to the corporate governance rules for NASDAQ-listed companies. As a controlled Company, our common stock may be less attractive to some investors or otherwise harm our stock price.

 

Because we qualify as a “controlled company” under the corporate governance rules for NASDAQ-listed companies, we are not required to have a majority of our board of directors be independent, nor are we required to have a compensation committee or an independent nominating function. In light of our status as a controlled company, our board of directors has determined not to have a majority of independent directors or an independent nominating or compensation committee and to have the full board of directors be directly responsible for compensation matters and for nominating members of our board. Accordingly, should the interests of our controlling stockholder differ from those of other stockholders, the other stockholders may not have the same protections afforded to stockholders of companies that are subject to all the corporate governance rules for NASDAQ-listed companies. Our status as a controlled company could make our common stock less attractive to some investors or otherwise harm our stock price.

 

Delaware law and our corporate charter and bylaws contain anti-takeover provisions that could delay or discourage takeover attempts that stockholders may consider favorable.

 

Our board of directors is authorized to issue shares of preferred stock in one or more series and to fix the voting powers, preferences and other rights and limitations of the preferred stock. Accordingly, we may issue shares of preferred stock with a preference over our common stock with respect to dividends or distributions on liquidation or dissolution, or that may otherwise adversely affect the voting or other rights of the holders of common stock. Issuances of preferred stock, depending upon the rights, preferences and designations of the preferred stock, may have the effect of delaying, deterring or preventing a change of control, even if that change of control might benefit our stockholders. In addition, we are subject to Section 203 of the Delaware General Corporation Law. Section 203 generally prohibits a public Delaware corporation from engaging in a “business combination” with an “interested stockholder” for a period of three years after the date of the transaction in which the person became an interested stockholder, unless (i) prior to the date of the transaction, the board of directors of the corporation approved either the business combination or the transaction which resulted in the stockholder becoming an interested stockholder; (ii) the interested stockholder owned at least 85% of the voting stock of the corporation outstanding at the time the transaction commenced, excluding for purposes of determining the number of shares outstanding (a) shares owned by persons who are directors and also officers and (b) shares owned by employee stock plans in which employee participants do not have the right to determine confidentially whether shares held subject to the plan will be tendered in a tender or exchange offer; or (iii) on or subsequent to the date of the transaction, the business combination is approved by the board and authorized at an annual or special meeting of stockholders, and not by written consent, by the affirmative vote of at least 66 2/3% of the outstanding voting stock which is not owned by the interested stockholder.

 

Section 203 could delay or prohibit mergers or other takeover or change in control attempts with respect to us and, accordingly, may discourage attempts to acquire us even though such a transaction may offer our stockholders the opportunity to sell their stock at a price above the prevailing market price.

 

Your ability to influence corporate decisions may be limited because Provident Pioneer Partners, L.P. owns a controlling percentage of our common stock.

 

Provident Pioneer Partners, L.P., which is controlled by Nathan J. Mazurek, our chief executive officer, president and chairman of the board of directors, beneficially owns approximately 52.5% of our outstanding common stock as of March 28, 2017. As a result of this stock ownership, Provident Pioneer Partners, L.P. and Mr. Mazurek can control all matters submitted to our stockholders for approval, including the election of directors and approval of any merger, consolidation or sale of all or substantially all of our assets. This concentration of voting power could delay or prevent an acquisition of our company on terms that other stockholders may desire. In addition, as the interests of Provident Pioneer Partners, L.P. and our minority stockholders may not always be the same, this large concentration of voting power may lead to stockholder votes that are inconsistent with the best interests of our minority stockholders or the best interest of us as a whole. 

 

Furthermore, pursuant to the terms of our credit agreement with BMO, we are restricted from, among other things, entering into merger agreements or agreements for the sale of any or all of our assets outside the course of ordinary business. As such, even if certain corporate transactions may be approved by our stockholders, BMO, as the lender under our credit agreement, has final authority to approve or reject certain of our transactions. This could lead to us not being able to effect certain transactions that may be in the best interests of our stockholders or our business.

 

 18

 

 

We are subject to financial reporting and other requirements for which our accounting, internal audit and other management systems and resources may not be adequately prepared.

 

We are subject to reporting and other obligations under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), including the requirements of Section 404 of the Sarbanes-Oxley Act. Section 404 requires us to conduct an annual management assessment of the effectiveness of our internal controls over financial reporting. These reporting and other obligations place significant demands on our management, administrative, operational, internal audit and accounting resources. Any failure to maintain effective internal controls could have a material adverse effect on our business, operating results and stock price.

 

In addition, our internal controls will also include those of any company or business that we may acquire in the future. Acquired companies or businesses are likely to have different standards, controls, contracts, procedures and policies, making it more difficult to implement and harmonize company-wide financial, accounting, information and other systems. As a result, our internal controls may become more complex and we may require significantly more resources to ensure they remain effective. Failure to implement required new or improved controls, or difficulties encountered in their implementation, either in our existing business or in businesses that we may acquire, could harm our operating results or cause us to fail to meet our reporting obligations.

 

We have identified material weaknesses in our internal control over financial reporting, and if we are unable to achieve and maintain effective internal control over financial reporting or effective disclosure controls, this could have a material adverse effect on our business.

As discussed in Item 9A “Controls and Procedures”, we concluded there are material weaknesses in the design and operating effectiveness of our internal control over financial reporting. A material weakness is defined as a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of a company’s annual or interim financial statements will not be prevented or detected on a timely basis by the company’s internal controls.

 

We cannot assure you that we will be able to remediate our existing material weaknesses in a timely manner, if at all, or that in the future additional material weaknesses will not exist, reoccur or otherwise be discovered, a risk that is significantly increased in light of the complexity of our business. If our efforts to remediate these material weaknesses, as described in Item 9A “Controls and Procedures”, are not successful or if other deficiencies occur, our ability to accurately and timely report our financial position, results of operations, cash flows or key operating metrics could be impaired, which could result in late filings of our annual and quarterly reports under the Exchange Act, restatements of our consolidated financial statements or other corrective disclosures. Additional impacts could include a decline in our stock price, suspension of trading or delisting of our common stock by the Nasdaq Capital Market, or other material adverse effects on our business, reputation, results of operations, financial condition or liquidity. Furthermore, if we continue to have these existing material weaknesses, other material weaknesses or significant deficiencies in the future, it could create a perception that our financial results do not fairly state our financial condition or results of operations. Any of the foregoing could have an adverse effect on the value of our stock.

 

Risks Relating to our Common Stock  

 

There has been a limited market for our common stock and we cannot ensure investors that an active market for our common stock will be sustained.

 

There has been limited trading in our common stock and there can be no assurance that an active trading market in our common stock will be maintained. Due to the illiquidity of our common stock, the market price may not accurately reflect our relative value. There can be no assurance that an active market for our shares of common stock will develop in the future. Because our common stock is so thinly traded, even limited trading in our shares has in the past, and might in the future, lead to dramatic fluctuations in share price and investors may not be able to liquidate their investment in us at all or at a price that reflects the value of the business.

 

While our common stock became listed on the Nasdaq Capital Market as of September 2013, we cannot assure you that we will maintain compliance with all of the requirements for our common stock to remain listed. Additionally, there can be no assurance that trading of our common stock on such market will be sustained or desirable.

 

 19

 

 

Our stock price may be volatile, which could result in substantial losses for investors.

 

The market price of our common stock is highly volatile and could fluctuate widely in response to various factors, many of which are beyond our control, including the following:

 

  technological innovations or new products and services by us or our competitors;
  additions or departures of key personnel, including Nathan J. Mazurek, our chairman, president and chief executive officer;
  sales of our common stock, including management shares;
  limited availability of freely-tradable “unrestricted” shares of our common stock to satisfy purchase orders and demand;
  our ability to execute our business plan;
  operating results that fall below expectations;
  loss of any strategic relationship;
  industry developments;
  economic and other external factors;
  our ability to manage the costs of maintaining adequate internal financial controls and procedures in connection with the acquisition of additional businesses;
  period-to-period fluctuations in our financial results; and
  announcements of acquisitions.

 

In addition, the securities markets have from time to time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies. These market fluctuations may also significantly affect the market price of our common stock.

 

Offers or availability for sale of a substantial number of shares of our common stock may cause the price of our common stock to decline.

 

Sales of a significant number of shares of our common stock in the public market could harm the market price of our common stock and make it more difficult for us to raise funds through future offerings of common stock. Our stockholders and the holders of our options and warrants may sell substantial amounts of our common stock in the public market. The availability of these shares of our common stock for resale in the public market has the potential to cause the supply of our common stock to exceed investor demand, thereby decreasing the price of our common stock.

 

In addition, the fact that our stockholders, option holders and warrant holders can sell substantial amounts of our common stock in the public market, whether or not sales have occurred or are occurring, could make it more difficult for us to raise additional financing through the sale of equity or equity-related securities in the future at a time and price that we deem reasonable or appropriate.

 

We do not expect to pay cash dividends in the future. As a result, any return on investment may be limited to the value of our common stock.

 

We do not anticipate paying cash dividends on our common stock in the foreseeable future. The payment of dividends on our common stock will depend on our net income, financial condition and other business and economic factors as our board of directors may consider relevant. In addition, our credit agreement with BMO restricts our ability to pay cash dividends. If we do not pay dividends, our common stock may be less valuable because a return on your investment will only occur if our stock price appreciates.

 

If securities or industry analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.

 

The trading market for our common stock will depend in part on the research and reports that securities or industry analysts publish about us or our business. We do not currently have research coverage by securities and industry analysts and you should not invest in our common stock in anticipation that we will obtain such coverage. If we obtain securities or industry analyst coverage and if one or more of the analysts who covers us downgrades our stock or publishes inaccurate or unfavorable research about our business, our stock price would likely decline. If one or more of these analysts ceases coverage of us or fails to publish reports on us regularly, demand for our stock could decrease, which could cause our stock price and trading volume to decline.

 

ITEM 1B.  UNRESOLVED STAFF COMMENTS

 

Not applicable.

 

 20

 

 

ITEM 2.   PROPERTIES

 

Location   Description   Approximate
Square
Footage
  Owned or
Lease
Expiration Date
Granby, Quebec   Manufacturing and administration   50,000   Owned
Farnham, Quebec   Manufacturing and administration   69,000   Owned
Reynosa, Mexico   Manufacturing   52,000   December 2026
Reynosa, Mexico   Manufacturing   35,000   December 2026
Santa Fe Springs, California   Manufacturing, sales, engineering and administration   40,000   August 2018
Brooklyn Park, Minnesota   Manufacturing, sales, engineering and administration   16,000   December 2020
Pharr, Texas   Distribution warehouse   24,000   August 2020
Omaha, Nebraska   Sales and service   6,800   December 2020
Duluth, Minnesota   Sale, service and warehouse   4,600   July 2020
Doral, Florida   Sales and service   2,400   August 2017
Franklin, Wisconsin   Sales, marketing, engineering and adminstration   5,000   December 2018
Mississauga, Ontario   Sales and engineering   1,400   July 2021
Fort Lee, New Jersey   Corporate management and sales office   2,700   November 2022

 

We believe our manufacturing and distribution facilities are well maintained, in proper condition to operate at higher than current levels and are adequately insured. We do not anticipate significant difficulty in renewing or extending existing leases as they expire, or in replacing them with equivalent facilities or office locations. Of the owned properties, both are subject to encumbrances with a bank, in amounts that we do not believe are material to our operations.

 

ITEM 3.   LEGAL PROCEEDINGS.

 

From time to time, we may become involved in lawsuits, investigations and claims that arise in the ordinary course of business. 

 

On January 11, 2016, Myers Power Products, Inc., a specialty electrical products manufacturer, filed suit with the Superior Court of the State of California, County of Los Angeles, against us, PCEP and two PCEP’s employees who are former employees of Myers Power Products, Inc., Geo Murickan, the president of PCEP (“Murickan”), and Brett DeChellis (“DeChellis”), alleging, among other things, that Murickan wrongly used and retained confidential business information of Myers Power Products, Inc. for the benefit of us and PCEP, in breach of their confidentiality agreement and/or employment agreement entered into with Myers Power Products, Inc., and that we and PCEP knowingly received and used such confidential business information. Myers Power Products, Inc. is seeking injunctive relief enjoining us, PCEP and our employees from using its confidential business information and compensatory damages of an unspecified unlimited (exceeding $25,000) amount. On March 18, 2016, we filed an answer to the complaint, denying generally each and every allegation and relief sought by Myers Power Products, Inc. and seeking dismissal based on, among other things, failure to state facts sufficient to constitute a cause of action. We intend to contest the matter vigorously. Due to the uncertainties of litigation, however, we can give no assurance that we, PCEP and our employees will prevail on any claims made against us, PCEP and our employees in any such lawsuit. Also, we can give no assurance that any other lawsuits or claims brought in the future will not have an adverse effect on our financial condition, liquidity or operating results. See Note 11 ‒ Commitments and Contingencies included in the notes to our consolidated financial statements included in this Annual Report on Form 10-K.

 

As of the date of this filing, we are not aware of any other material legal proceedings to which we or any of our subsidiaries is a party or to which any of our property is subject, nor are we aware of any such threatened or pending litigation or any such proceedings known to be contemplated by governmental authorities other than other than the foregoing suit filed by Myers Power Products, Inc.  

 

We are not aware of any material proceedings in which any of our directors, officers or affiliates or any registered or beneficial shareholder of more than 5% of our common stock is an adverse party or has a material interest adverse to our interest.

 

ITEM 4.   MINE SAFETY DISCLOSURES.

 

Not applicable.

 

21

 

 

PART II

 

ITEM 5.   MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Our common stock has been listed on the Nasdaq Capital Market under the symbol “PPSI” since September 19, 2013. Prior to that time, it was quoted on the OTCQB. The following table sets forth the high and low sales prices for our common stock as reported on the Nasdaq Capital Market for the periods indicated.

 

Fiscal Year     Period     High     Low  
2016     First Quarter Ended March 31     $ 5.73     $ 2.78  
      Second Quarter Ended June 30       6.38       4.40  
      Third Quarter Ended September 30       6.00       4.85  
      Fourth Quarter Ended December 31       5.99       4.85  
                         
2015     First Quarter Ended March 31       9.99       8.67  
      Second Quarter Ended June 30       8.91       6.75  
      Third Quarter Ended September 30       7.80       3.60  
      Fourth Quarter Ended December 31       4.50       3.06  

 

The last reported sales price of our common stock on the Nasdaq Capital Market on March 28, 2017, was $6.90 per share. As of March 28, 2017, there were 30 holders of record of our common stock.

 

We have not declared or paid cash dividends on our common stock during the two most recent fiscal years, and we do not intend to pay any cash dividends on our common stock during the foreseeable future. Rather, we intend to retain future net income (if any) to fund the operation and expansion of our business and for general corporate purposes. Subject to legal and contractual limits, our board of directors will make any decision as to whether to pay dividends in the future. In addition, our credit agreement with BMO, dated April 29, 2016, restricts our ability to pay cash dividends.

 

We did not repurchase any of our equity securities during the fourth quarter of the fiscal year ended December 31, 2016.

 

ITEM 6.   SELECTED FINANCIAL DATA.

 

Not applicable.

 

ITEM 7.  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

You should read the following discussion and analysis of our financial condition and results of operations together with our financial statements and related notes appearing elsewhere in this prospectus. In addition to historical financial information, the following discussion contains forward-looking statements that reflect our plans, estimates and beliefs. Our actual results could differ materially from those discussed in the forward-looking statements. Factors that could cause or contribute to these differences include those discussed below and elsewhere in this prospectus, particularly in the sections entitled “Risk Factors” and “Cautionary Note Regarding Forward-Looking Statements.”

 

Overview

 

We manufacture, sell and service a broad range of specialty electrical transmission, distribution and on-site power generation equipment for applications in the utility, industrial, commercial and backup power markets.  Our principal products and services include custom-engineered electrical transformers, switchgear and engine-generator sets and controls, complemented by a national field-service network to maintain and repair power generation assets. We are headquartered in Fort Lee, New Jersey and operate from 12 additional locations in the U.S., Canada and Mexico for manufacturing, service, centralized distribution, engineering, sales and administration.  

 

Our operations are divided into two reportable segments: Transmission & Distribution Solutions and Critical Power.  Our T&D Solutions business provides equipment solutions that help customers effectively and efficiently manage their electrical power distribution systems to desired specifications. These solutions are marketed principally through our PTL, Jefferson, Bemag, PCPI and PCEP brand names. As a result of the restructuring plans implemented during calendar year 2015, the activities of our PCPI switchgear operations have been transferred from the Critical Power segment to the T&D Solutions segment as of January 1, 2016. Our Critical Power business provides customers with sophisticated power generation equipment, related electrical distribution infrastructure, preventative maintenance services and an advanced data collection and monitoring platform, the combination of which is used to ensure smooth, uninterrupted power to operations during times of emergency. These solutions are marketed by our operations headquartered in Minnesota, currently doing business under the Titan brand name.

 

22

 

 

Foreign Currency Exchange Rates

 

Although we report our results in accordance with U.S. GAAP and in U.S. dollars, two of our business subsidiaries are Canadian operations whose functional currency is the Canadian dollar.  As such, the financial position, results of operations, cash flows and equity of these operations are initially consolidated in Canadian dollars. Their assets and liabilities are then translated from Canadian dollars to U.S. dollars by applying the foreign currency exchange rate in effect at the balance sheet date, while the results of their operations and cash flows are translated to U.S. dollars by applying weighted average foreign currency exchanges rates in effect during the reporting period. The resulting translation adjustments are included in other comprehensive income or loss. 

 

The following table provides actual end of period exchange rates used to translate the financial position of our Canadian operations at the end of each period reported. The average exchange rates presented below, as provided by the Bank of Canada, are indicative of the weighted average rates we used to translate the revenues and expenses of our Canadian operations into U.S. dollars (rates expressed as the number of U.S. dollars to one Canadian dollar for each period reported):

 

      2016     2015  
      Balance Sheet     Statements of Operations,
Comprehensive Income
and Cash Flow
    Balance Sheet     Statements of Operations,
Comprehensive Income
and Cash Flow
 
                  Cumulative                 Cumulative  
Quarter Ended     End of Period     Period Average     Average     End of Period     Period Average     Average  
March 31     $ 0.7700     $ 0.7274     $ 0.7274     $ 0.7895     $ 0.8057     $ 0.8057  
June 30     $ 0.7742     $ 0.7760     $ 0.7509     $ 0.8006     $ 0.8134     $ 0.8095  
September 30     $ 0.7624     $ 0.7662     $ 0.7560     $ 0.7493     $ 0.7638     $ 0.7937  
December 31     $ 0.7448     $ 0.7497     $ 0.7544     $ 0.7225     $ 0.7489     $ 0.7820  

 

Critical Accounting Policies

 

Use of Estimates. The preparation of financial statements in accordance with generally accepted accounting principles in the U.S. requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. The financial statements include estimates based on currently available information and our judgment as to the outcome of future conditions and circumstances. Significant estimates in these financial statements include pension expense, inventory provisions, useful lives and impairment of long-lived assets, warranty accruals, income tax provision, goodwill impairment analysis, stock-based compensation, allowance for doubtful accounts and estimates related to purchase price allocation. Changes in the status of certain facts or circumstances could result in material changes to the estimates used in the preparation of the financial statements and actual results could differ from the estimates and assumptions.

 

Revenue Recognition. Revenue is recognized when (1) persuasive evidence of an arrangement exists, (2) delivery occurs, (3) the sales price is fixed or determinable, (4) collectability is reasonably assured and (5) customer acceptance criteria, if any, has been successfully demonstrated. Revenue is recognized on the sale of goods, when the significant risks and rewards of ownership have been transferred to the buyer upon delivery, provided that the Company maintains neither managerial involvement to the degree usually associated with ownership, nor effective control over the goods sold. There are no further obligations on the part of the Company subsequent to revenue recognition, except when customers have the right of return or when the Company warrants the product. The Company records a provision for future returns, based on historical experience at the time of shipment of products to customers. The Company warrants some of its products against defects in design, materials and workmanship for periods ranging from one to three years depending on the model. The Company records a provision for estimated future warranty costs based on the historical relationship of warranty claims to sales at the time of shipment of products to customers. The Company periodically reviews the adequacy of its product warranties and adjusts, if necessary, the warranty percentage and accrued warranty reserve for actual experience.

 

Inventories.  We value inventories at the lower of cost or market. If a write down to the current market value is necessary, the market value cannot be greater than the net realizable value, which is defined as selling price less costs to complete and dispose, and cannot be lower than the net realizable value less a normal profit margin. We also continually evaluate the composition of our inventory and identify obsolete, slow-moving and excess inventories. Inventory items identified as obsolete, slow-moving or excess are evaluated to determine if reserves are required. If we were not able to achieve our expectations of the net realizable value of the inventory at current market value, we would have to adjust our reserves accordingly. We attempt to accurately estimate future product demand to properly adjust inventory levels for our standard products. However, significant unanticipated changes in demand could have a significant impact on the value of inventory and of operating results.

 

23

 

 

Impairment of Long-Lived Assets.  We review long-lived assets for impairment including intangible assets with determinable useful lives whenever events or changes in circumstances indicate that the carrying value of the corresponding asset group may not be realizable. If an evaluation is required, the estimated future undiscounted cash flows associated with the asset group are compared to the asset group’s carrying amount to determine if an impairment of such asset is necessary. This requires us to make long-term forecasts of the future revenues and costs related to the assets groups subject to review. Forecasts require assumptions about demand for our products and future market conditions. Estimating future cash flows requires significant judgment, and our projections may vary from cash flows eventually realized. Future events and unanticipated changes to assumptions could require a provision for impairment in a future period. The effect of any impairment would be reflected in operating income in the Consolidated Statements of Operations. In addition, we estimate the useful lives of our long-lived assets and other intangibles and periodically review these estimates to determine whether these lives are appropriate.

 

Goodwill and Indefinite lived intangible Assets.  Goodwill and other intangible assets with indefinite useful lives are not amortized, but are evaluated for impairment annually, or immediately if conditions indicate that impairment could exist. The evaluation requires a two-step impairment test to identify potential goodwill impairment and measure the amount of a goodwill impairment loss. The first step of the test compares the fair value of a reporting unit with its carrying amount, including goodwill. If the carrying amount of a reporting unit exceeds its fair value, the second step of the goodwill impairment test is performed to measure the amount of the impairment loss. Both steps of the goodwill impairment testing involve significant estimates.

 

Income Taxes. We account for income taxes under the asset and liability method, based on the income tax laws and rates in the countries in which operations are conducted and income is earned. This approach requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of temporary differences between the carrying amounts and the tax basis of assets and liabilities using expected rates in effect for the tax year in which the differences are expected to reverse. Developing the provision for income taxes requires significant judgment and expertise in federal, international and state income tax laws, regulations and strategies, including the determination of deferred tax assets and liabilities and, if necessary, any valuation allowances that may be required for deferred tax assets. A valuation allowance is recorded to reduce our deferred tax assets to the amount that is more likely than not to be realized. We believe that the deferred tax asset recorded as of December 31, 2016, is realizable through future reversals of existing taxable temporary differences and future taxable income. If we were to subsequently determine that we would be able to realize deferred tax assets in the future in excess of its net recorded amount, an adjustment to deferred tax assets would increase net income for the period in which such determination was made. We will continue to assess the adequacy of the valuation allowance on a quarterly basis. Our judgments and tax strategies are subject to audit by various taxing authorities.

 

As of December 31, 2016, we have recorded $204 for uncertain tax positions. We do not believe the total of unrecognized tax positions will significantly increase or decrease during the next 12 months.

 

Changes in Accounting Principles

 

In 2015, we adopted a change of goodwill testing date and ASU No. 2015-17, Income Taxes (topic 740). No other significant changes in accounting principles were adopted during 2016 and 2015.

 

Classification of Expenses

 

As the Company implemented the remediation plans discussed under the heading “Item 9A. Controls and Procedures” of this Annual Report on Form 10-K, the Company has determined that there were inconsistencies in classification of expenses between its business units. As a result, the Company has reclassified certain expenses from cost of goods sold to operating expenses for the year ended December 31, 2016. The Company has made the same reclassification to the results for the year ended December 31, 2015, resulting in an increase to gross profit of $332, or 0.31% as a percentage of sales as presented for this period.

 

Rounding

 

All dollar amounts (except share and per share data) presented are stated in thousands of dollars, unless otherwise noted. Amounts may not foot due to rounding.

 

24

 

 

RESULTS OF OPERATIONS

 

Overview of 2016 Operating Results

 

Selected financial and operating data for our reportable business segments for the most recent two years is summarized below. This information, as well as the selected financial data provided in Note 16 and our Consolidated Financial Statements and related notes included in this Annual Report on Form 10-K, should be referred to when reading our discussion and analysis of results of operations below. Our summary of operating results during the years ended 2016 and 2015 are as follows: 

 

    For the Years Ended December 31,
    2016   2015
Revenues        
T&D Solutions   $ 95,870     $ 84,871  
Critical Power Solutions     18,532       21,651  
Consolidated     114,402       106,522  
Cost of sales                
T&D Solutions     75,497       66,968  
Critical Power Solutions     15,494       18,117  
Consolidated     90,991       85,085  
Gross profit     23,411       21,437  
Selling, general and administrative expenses     17,852       19,365  
Depreciation and amortization expense     2,143       2,162  
Restructuring and integration     2,426       5,577  
Foreign exchange gain     (365 )     (367 )
Total operating expenses     22,056       26,737  
Operating income (loss)     1,355       (5,300 )
Interest expense     1,736       748  
Other income (expense)     (205 )     2,535  
Income (loss) before taxes     (176 )     (8,583 )
Income tax expense (benefit)     887       (2,702 )
Net income (loss)   $ (1,063 )   $ (5,881 )

  

Backlog.  Our order backlog at December 31, 2016 was $38.6 million, as compared to $28.7 million at December 31, 2015. Our backlog is based on orders expected to be delivered in the future, most of which is expected to occur during 2017. The following table represents the progression of our backlog, by reporting segment, for the periods ended as indicated:

 

    December 31,  
    2016     2015  
T&D Solutions   $ 34,588     $ 24,487  
Critical Power Solutions     3,970       4,180  
Total order backlog   $ 38,558     $ 28,667  

 

Revenue

 

The following table represents our revenues by reporting segment and major product category for the periods indicated (in thousands, except percentages):

 

    For the Years Ended December 31,  
    2016     2015     Variance     %  
T&D Solutions                                
Transformers   $ 81,111     $ 75,598     $ 5,513       7.3  
Switchgear     14,759       9,273       5,486       59.2  
      95,870       84,871       10,999       13.0  
Critical Power Solutions                                
Equipment     10,166       14,929       (4,763 )     (31.9 )
Service     8,366       6,722       1,644       24.5  
      18,532       21,651       (3,119 )     (14.4 )
Total revenue   $ 114,402     $ 106,522     $ 7,880       7.4  

 

For the year ended December 31, 2016, our consolidated revenue increased by $7.9 million, or 7.4%, to $114.4 million, up from $106.5 million during the year ended December 31, 2015.  

 

25

 

 

T&D Solutions. Revenue from our transformer product lines increased by $5.5 million, or 7.3%, driven by a 17.8% increase in sales from our U.S. operations led by significant growth in our low voltage, general purpose products. Offsetting the U.S. market increase was a decline in sales from our Canadian operations (down 3.0% in USD, but up 1.1% on a constant currency basis). Revenue from our switchgear product lines increased by $5.5 million, or 59.2%, driven by increased sales from our medium voltage switchgear offering, which was purchased in July, 2015.

 

Critical Power. Revenue for our equipment sales decreased by $4.8 million, or 31.9%, driven by our decision to concentrate our efforts on service revenue, which provides higher profit margins. The increase in service revenue of $1.6 million, or 24.5% is further confirmation of this strategy.

 

Gross Profit and Gross Margin

 

The following table represents our gross profit by reporting segment for the periods indicated (in thousands, except percentages):

 

    For the Years Ended December 31,
    2016   2015   Variance   %
T&D Solutions                
Gross profit   $ 20,373     $ 17,903     $ 2,470       13.8  
Gross margin %     21.3       21.1       0.2          
                                 
Critical Power Solutions                                
Gross profit     3,038       3,534       (496 )     (14.0 )
Gross margin %     16.4       16.3       0.1          
                                 
Consolidated gross profit   $ 23,411     $ 21,437     $ 1,974       9.2  
Consolidated gross margin %     20.5       20.1       0.4          

  

For the year ended December 31, 2016, our gross margin percentage was 20.5% of revenues, compared to 20.1% during the year ended December 31, 2015. The 0.4% increase in our consolidated gross margin percentage is explained predominantly by the results of our T&D Solutions segment.

 

T&D Solutions. The 0.2% increase in our T&D Solutions gross margin resulted from a favorable shift in our sales mix to more custom-engineered transformers and the continuation of an Asian supply channel, at a lower landed cost, for the highly competitive low voltage standard transformer products.

 

During 2015, we completed the development of our low voltage transformer product offering to make them comply with new Department of Energy efficiency standards coming into effect in 2016. The cost of these projects was recognized as period expenses during 2015 and prior years.

 

Our T&D switchgear product sales grew rapidly and at an improved gross margin during the year, as we concentrated on more profitable medium voltage projects and reduced our activity in low voltage projects in 2016, as compared to 2015. During 2016, we made the strategic decision to reduce our sales efforts in low voltage switchgear products. During the implementation of this strategic change, we incurred $97 of payroll and related costs that will be eliminated in future years.

 

Critical Power. The 0.1% increase in our Critical Power segment gross margin was driven primarily by the strategic shift to concentrate on higher margin service revenue while decreasing the focus on sales of equipment. During 2016, we made the strategic decision to reduce our efforts in selling equipment. During the implementation of this strategic change, we incurred $23 of payroll and related costs that will be eliminated in future years.

 

 

26

 

 

Operating Expenses

 

The following table represents our operating expenses by reportable segment for the periods indicated (in thousands, except percentages):

 

    For the Years Ended December 31,
    2016   2015   Variance   %
T&D Solutions                
Selling, general and administrative expense   $ 13,202     $ 13,508     $ (306 )     (2.3 )
Depreciation and amortization expense     670       640       30       4.7  
Restructuring and integration     2,367       5,083       (2,716 )     (53.4 )
Foreign exchange gain     (365 )     (356 )     (9 )     2.5  
Segment operating expense   $ 15,874     $ 18,875     $ (3,001 )     (15.9 )
                                 
Critical Power Solutions                                
Selling, general and administrative expense   $ 1,539     $ 2,852     $ (1,313 )     (46.0 )
Depreciation and amortization expense     1,405       1,449       (44 )     (3.0 )
Restructuring and integration     32       80       (48 )     (60.0 )
Segment operating expense   $ 2,976     $ 4,381     $ (1,405 )     (32.1 )
                                 
Unallocated Corporate Overhead Expenses                                
Selling, general and administrative expense   $ 3,111     $ 3,005     $ 106       3.5  
Depreciation expense     68       73       (5 )     (7 )
Restructuring and integration     27       414       (387 )     (93.5 )
Foreign exchange gain     —         (11 )     11       —    
Segment operating expense   $ 3,206     $ 3,481     $ (275 )     (7.9 )
                                 
Consolidated                                
Selling, general and administrative expense   $ 17,852     $ 19,365     $ (1,513 )     (7.8 )
Depreciation and amortization expense     2,143       2,162       (19 )     (0.9 )
Restructuring and integration     2,426       5,577       (3,151 )     (56.5 )
Foreign exchange gain     (365 )     (367 )     2       (0.5 )
Consolidated operating expense   $ 22,056     $ 26,737     $ (4,681 )     (17.5 )

   

Selling, General and Administrative Expense. For the year ended December 31, 2016, consolidated selling, general and administrative expense, before depreciation and amortization, decreased by approximately $1.5 million, or 7.8%, to $17.9 million, as compared to $19.4 million during the year ended December 31, 2015. As a percentage of our consolidated revenue, selling, general and administrative expense decreased to 15.6% in 2016, as compared to 18.2% in 2015.

 

The selling, general and administrative expense in our Critical Power segment decreased by $1.3 million as compared to 2015. While implementing the strategy to decrease focus on equipment sales, we incurred payroll and related costs of $157 during 2016. The overall decrease is from employment reductions done pursuant to this strategy to decrease focus on the equipment sales in this segment.

 

Selling, general and administrative expense in our T&D Solutions segment decreased by $0.3 million, or 2.3%, during the year ended December 31, 2016, as compared to 2015. While implementing the strategy to reduce our low voltage switchgear sales, we incurred payroll and related costs of $555 and other costs of $152 during 2016.

 

Depreciation and Amortization Expenses.  Depreciation and amortization expense consists primarily of depreciation of fixed assets and amortization of definite-lived intangible assets and excludes amounts included in cost of revenue. There was no material change in depreciation and amortization expense between the years ended December 31, 2016 and December 31, 2015.

  

Foreign Exchange (Gain) Loss. For the year ended December 31, 2016, approximately 34% of our consolidated operating revenues were denominated in Canadian dollars, and the majority of our expenses were denominated and disbursed in U.S. dollars. We have not historically engaged in currency hedging activities. Fluctuations in foreign currency exchange rates between the time we initiate and then settle transactions with our customers and suppliers can have an impact on our operating results. For both of years ended December 31, 2016 and 2015, we recorded a gain of $0.4 million due to currency fluctuations.

 

27 
 

 

Restructuring, Integration, and Impairment. In 2016, $2.4 million of restructuring expenses were incurred as a result of the relocation of the medium voltage transformer production facility to a lower cost facility. These costs were primarily from business integration costs of $2.1 million and cost over runs of $300 on the 2015 restructuring accruals. In 2015, an additional $5.6 million of restructuring expenses were incurred as the result of three plant consolidations. These costs were mainly the result of write down of the carrying value of fixed assets ($2.8 million), business integration costs ($1.5 million), employee severance and related costs ($0.6 million) and lease termination and relocation costs for the balance.

 

Operating Income (Loss)

 

The following table represents our operating income or (loss) by reportable segment for the periods indicated:

 

    For the Years Ended December 31,
    2016   2015   Variance   %
T&D Solutions   $ 4,499     $ (972 )   $ 5,471       562.9  
Critical Power Solutions     62       (847 )     909       107.3  
Unallocated Corporate Overhead Expenses     (3,206 )     (3,481 )     275       7.9  
Total operating income (loss)   $ 1,355     $ (5,300 )   $ 6,655       125.6  

  

T&D Solutions.  Operating income from this segment increased by $5.5 million, resulting from lower restructuring costs, lower operating expenses and increased sales volumes in the year ended December 31, 2016 compared to the year ended December 31, 2015.

 

Critical Power. The Critical Power segment operating income increased by $0.9 million during 2016 from 2015. This increase resulted from lower payroll costs and an increase in service revenue.

 

General Corporate Expense. Our general corporate expense consists primarily of executive management, corporate accounting and human resources personnel, office expenses, financing and corporate development activities, payroll and benefits administration, treasury, tax compliance, legal, stock-based compensation and public reporting costs, and costs not specifically allocated to reportable business segments. During the year ended December 31, 2016, our unallocated corporate overhead expense decreased by $275.

  

Non-Operating Expense

 

Interest Expense. For the year ended December 31, 2016, our interest expense was $1.7 million, as compared to approximately $0.7 million for the year ended December 31, 2015.  The net increase in our interest expense was due to higher average borrowings under our credit facilities during 2016, as compared to 2015. The aggregate outstanding balance of our total debt increased by approximately $10.2 million during the year ended December 31, 2016.

 

Other Expense (Income). For the year ended December 31, 2016, our non-operating income of $0.2 million consists primarily of abatement of penalties as they related to non-payment of payroll taxes of $1.1 million, offset by intangible impairment of $0.1 million. For the year ended December 31, 2015, our non-operating expense of $2.5 million consisted primarily of professional fees and costs incurred in connection with acquisitions of $1.1 million and interest and penalties from the non-payment of payroll taxes of $1.5 million.

 

Provision for Income Taxes. Our provision reflects an effective tax rate on loss before income taxes of 504% in 2016, as compared to 31% in 2015, as set forth below (dollars in thousands): 

 

    For the Years Ended December 31,
    2016   2015   Variance
Loss before income taxes   $ 176     $ 8,583     $ (8,406 )
Income tax expense (benefit)     887       (2,702 )     3,589  
Effective income tax rate %     504       31       472  

   

The increase in the Company’s effective tax rate during 2016 primarily reflects the correction of a prior year error in the current year, and the recognition of prior period adjustments resulting from an audit of our tax returns in Canada, as well as the permanent benefit resulting from the abatement of payroll tax penalties.  

  

28 
 

 

Net Loss Per Share

 

We generated a net loss of $1.1 million for the year ended December 31, 2016, as compared to net loss of $5.9 million during the year ended December 31, 2015. In 2016, our net loss per basic and diluted share was $0.12, as compared to net loss of $0.76 during the year ended December 31, 2015.  

 

LIQUIDITY AND CAPITAL RESOURCES

 

General. At December 31, 2016, we had cash and cash equivalents of approximately $0.2 million and total debt outstanding of $28.2 million, when including bank overdrafts. We have historically met our cash needs through a combination of cash flows from operating activities, bank borrowings under our revolving credit facilities and distributions between our U.S. and foreign subsidiaries. Our cash requirements are generally for operating activities, debt repayment, capital improvements and acquisitions. We believe that working capital, borrowing capacity available under our credit facilities, funds generated from operations and cash available on hand should be sufficient to finance our cash requirements for anticipated operating activities, capital improvements and principal repayments of debt through at least the next twelve months.

 

Cash Provided/Used by Operating Activities. Cash used by our operating activities was approximately $9.5 million during the year ended December 31, 2016, compared to cash used by our operating activities of $4.0 million during the year ended December 31, 2015, primarily due to deferred taxes, restructuring and working capital changes.

 

Cash Used in Investing Activities. Cash used in investing activities during the year ended December 31, 2016 was approximately $0.6 million, as compared to $3.4 million during the year ended December 31, 2015.  During 2015, our cash used in investing activities included $2.1 million for business acquisitions. Additions to our property, plant and equipment in the ordinary course of business were approximately $0.7 million and $1.1 million, respectively, during the years ended December 31, 2016 and 2015.

 

Cash Provided by Financing Activities. Cash provided by our financing activities was $10.0 million during the year ended December 31, 2016, as compared to cash provided by our financing activities of approximately $4.5 million during the year ended December 31, 2015.  During 2015, borrowings under our revolving credit facilities increased by $7.8 million.  

 

Working Capital.  As of December 31, 2016, we had working capital of $2.4 million, including $0.2 million of cash and cash equivalents, compared to negative working capital of $3.1 million, including $0.6 million of cash and cash equivalents at December 31, 2015. Our current assets were approximately 1.1 times our current liabilities at December 31, 2016, as compared to 0.9 times at December 31, 2015. At December 31, 2016 and 2015, we had $1.5 million and $2.6 million, respectively, of available and unused borrowing capacity from our revolving credit facilities, without taking into account cash and equivalents on hand. However, the availability of this capacity under our revolving credit facilities is subject to restrictions on the use of proceeds and is dependent upon our ability to satisfy certain financial and operating covenants, including financial ratios.

 

Assessment of Liquidity.  At December 31, 2016, we had total debt of $28.2 million and $0.2 million of cash and cash equivalents on hand. We have historically met our cash needs through a combination of cash flows from operating activities and bank borrowings under our revolving credit facilities. Our cash requirements are generally for operating activities, debt repayment, capital improvements and acquisitions. In addition, as further discussed below, our credit facilities maturity dates have been extended until July 2018.

 

The financial statements included in this annual report have been prepared assuming that we will continue as a going concern, which contemplates the recoverability of assets and the satisfaction of liabilities in the normal course of business.  Significant assumptions underlie this belief, including, among other things, that there will be no material adverse developments in our business, liquidity, capital requirements and that our credit facilities with our lender will remain available to us and will not need to be replaced. 

 

Credit Facilities and Long-Term Debt

 

Canadian Credit Facilities

 

Our Canadian subsidiaries have maintained credit facilities with BMO since October 2009. In June 2011, our wholly owned subsidiary Pioneer Electrogroup Canada Inc. entered into a letter loan agreement with BMO (the “Initial Canadian Facilities”) that replaced and superseded all of our businesses’ prior financing arrangements with the bank.

 

Our Initial Canadian Facilities originally provided for up to $22.0 million Canadian dollars (“CAD”) (approximately $15.9 million expressed in U.S. dollars) consisting of a $10.0 million CAD demand revolving credit facility (“Facility A”) to finance ongoing operations, a $2.0 million CAD term credit facility (“Facility B”) that financed a plant expansion, and a $10.0 million CAD term credit facility (“Facility C”) that financed a business acquisition and the purchase and expansion of its manufacturing facilities.

 

The Initial Canadian Facilities required us to comply on a consolidated Canadian basis with various financial covenants, including maintaining a minimum fixed charge coverage ratio, a maximum funded debt to EBITDA ratio and a limitation on funded debt as a percent of capitalization.

 

29 
 

 

Facility A was originally subject to margin criteria and borrowings bear interest at BMO’s prime rate plus 0.50% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 0.50% per annum or LIBOR plus 2.00% per annum on amounts borrowed in U.S. dollars.

 

Borrowings under Facility B originally bore interest at BMO’s prime rate plus 1.00% per annum with principal repayments becoming due on a five year amortization schedule.

 

Borrowings under Facility C were repayable according to a five year principal amortization schedule and bore interest at the following rates: if the funded debt to EBITDA ratio is equal to or greater than 2.00, BMO’s prime rate plus 1.25% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 1.25% per annum or LIBOR plus 2.50% per annum on amounts borrowed in U.S. dollars; or, if the funded debt to EBITDA ratio is less than 2.00, BMO’s prime rate plus 1.00% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 1.00% per annum or LIBOR plus 2.25% per annum on amounts borrowed in U.S. dollars. In addition, Facility C was subject to a standby fee which is calculated monthly using the unused portion of the facility at either 0.625% per annum if the funded debt to EBITDA ratio is equal to or greater than 2.00 or 0.5625% per annum if the funded debt to EBITDA ratio is less than 2.00.

 

 In the third quarter of 2015, in connection with an amendment to our United States credit facilities, we elected to prepay $5.0 million Canadian dollars (approximately $4.0 million expressed in U.S. dollars) of Facility C with cash available on hand.

 

In April 2016, our wholly owned subsidiary, Pioneer Electrogroup Canada Inc. (“PECI”), entered into an Amended and Restated Credit Agreement (“CAD ARCA”) with BMO with respect to our existing Canadian credit facilities (as amended and restated, the “Canadian Facilities”) that replaced and superseded all of our businesses’ prior financing arrangements with the bank. This CAD ARCA extended the maturity date of our Canadian Facilities to July 31, 2017. Additionally, defaults relating to the breach of certain financial covenants under the prior financing arrangements with the bank existing as of December 31, 2015 were waived by BMO. On March 15, 2017, the CAD ARCA was further amended (the “2017 CAD ARCA Amendment”).

 

Our Canadian Facilities provided for up to $8.1 million CAD (approximately $6.3 million expressed in U.S. dollars) consisting of a revolving $7.0 million CAD Facility A to finance ongoing operations, a $0.5 million CAD Facility B that financed a plant expansion, and a $0.7 million USD Facility C that financed a business acquisition and the purchase and expansion of its manufacturing facilities. The 2017 CAD ARCA Amendment increased the Facility A to $8.0 million CAD, increasing the total amount of loans available under the Canadian Facilities to $9.1 million CAD.

 

Facility A, as amended and restated, is subject to margin criteria and borrowings bear interest at BMO’s prime rate plus 0.75% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 0.75% per annum or LIBOR plus 2.25% per annum on amounts borrowed in U.S. dollars. Pursuant to the 2017 CAD ARCA Amendment, Facility A will mature on July 31, 2018.

  

Borrowings under Facility B, as amended and restated, bear interest at BMO’s prime rate plus 1.25% per annum with principal repayments becoming due on a five year amortization schedule. Pursuant to the CAD ARCA, quarterly principal repayments were reduced to $47 CAD, with a balloon payment of $141 CAD due on July 31, 2017. The 2017 CAD ARCA Amendment amended the payment schedules so that the quarterly principal payments of $47 CAD will continue after July 31, 2017 until our borrowings under the facility is fully paid on April 30, 2018.

 

Borrowings under Facility C, as amended and restated, bear interest at BMO’s prime rate plus 1.50% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 1.50% per annum or LIBOR plus 2.75% per annum on amounts borrowed in U.S. dollars. Pursuant to the CAD ARCA, a principal repayment of $72 USD was due on June 30, 2016, and the reduced quarterly principal repayments of $36 USD was to be made beginning on October 31, 2016, with a balloon payment of $496 USD due on July 31, 2017. The 2017 CAD ARCA Amendment amended the payment schedules so that the quarterly payments of $36 USD will continue until July 31, 2018, with a balloon payment of $352 due on July 31, 2018. 

 

The CAD ARCA modified financial covenant testing so that testing will be performed on our consolidated financial statements. The financial covenants were changed pursuant to the CAD 2017 Amendment to require certain minimum working capital ratios, minimum EBITDA levels and effective tangible net worth levels for each fiscal quarter, which were further modified by the 2017 CAD ARCA Amendment. We are in compliance with most of the financial covenant testing and, on March 6, 2017, we received a waiver from BMO on certain financial covenants existing as of December 31, 2016.

  

As of December 31, 2016, we had approximately $5.2 million in U.S. dollar equivalents outstanding under our Canadian Credit Facilities. Our borrowings consisted of approximately $4.4 million outstanding under Facility A, $0.2 million outstanding under Facility B and $0.6 million outstanding under Facility C.

 

As of December 31, 2015, we had approximately $1.7 million in U.S. dollar equivalents outstanding under our initial Canadian Facilities. Our borrowings consisted of approximately $0.5 million outstanding under Facility A, $0.4 million outstanding under Facility B and $0.8 million outstanding under Facility C.

 

30 
 

  

United States Credit Facilities

 

On December 2, 2014, our existing U.S. credit facilities (the “U.S. Facilities) were amended in order to provide a $5.0 million term loan facility that was used for the acquisition of Titan. The term loan facility had principal repayments becoming due on a five year amortization schedule.

 

The U.S. Facilities initially required us to comply with a two-step test of financial covenants. First, as measured on a consolidated basis, we were required to comply with a maximum funded debt to adjusted EBITDA ratio of (a) 3.15x for the quarter ended December 31, 2014 and the quarter ending March 31, 2015, (b) 3.25x for the quarter ending June 30, 2015, (c) 3.65x for the quarter ending September 30, 2015, and (d) 2.75x for the quarter ending December 31, 2015 and all testing periods thereafter. Secondly, if the funded debt to adjusted EBITDA tests above are met, and our fixed charge coverage ratio is at or above 1.10x for the quarter ended December 31, 2014, and at or above 1.25x for all testing periods thereafter, then no further compliance tests were required.

 

Alternatively, we could comply with the financial covenant requirements of the U.S. Facilities if our U.S. operations maintained a maximum funded debt to capitalization ratio and various minimum fixed charge coverage ratios and maximum funded debt to adjusted EBITDA ratios which were set at different thresholds by time period.

 

Borrowings under the demand revolving credit facility (USD Facility A) bore interest, at our option, at the bank’s prime rate plus 1.00% per annum on U.S. prime rate loans, or an adjusted LIBOR rate plus 2.25% per annum on Eurodollar loans. Borrowings under the term loan facility (USD Facility B) bore interest, at our option, at the bank’s prime rate plus 1.25% per annum on U.S. prime rate loans, or an adjusted LIBOR rate plus 2.50% per annum on Eurodollar loans.

  

In April 2016, we entered into an Amended and Restated Credit Agreement (“US ARCA”) with BMO with respect to our U.S. Facilities that replaced and superseded all of our businesses’ prior financing arrangements with the bank. Additionally, defaults relating to the breach of certain financial covenants under the prior financing arrangements with the bank existing as of December 31, 2015 were waived by BMO. On March 15, 2017, the US ARCA was further amended (the “2017 US ARCA Amendment”).

 

Our U.S. Facilities, as amended and restated, provided for up to $19.1 million USD consisting of a $14.0 million USD Facility A to finance ongoing operations, a $5.0 million USD Facility B that financed the acquisition of Titan, and a new $0.1 million revolving credit facility provided pursuant to a MasterCard is to be used to pay for and temporarily finance our day-to-day business expenses and for no other purpose. The 2017 US ARCA Amendment increased the USD Facility A to $15.0 million, increasing the total amount of loans available under the U.S. Facilities to $20.1 million USD.

 

USD Facility A continues to bear interest, at our option, at the bank’s prime rate plus 1.00% per annum on U.S. prime rate loans, or an adjusted LIBOR rate plus 2.25% per annum on Eurodollar loans. USD Facility A had a maturity date of July 31, 2017, which was extended to July 31, 2018 pursuant to the 2017 US ARCA Amendment.

 

Borrowings under USD Facility B bear interest, at our option, at U.S. base rate plus 1.25% per annum on U.S. prime loans, or an adjusted LIBOR rate plus 2.50% per annum on Eurodollar loans. Pursuant to the US ARCA, our quarterly principal payments were reduced to $31 USD for calendar year 2016, with the original amortization schedule continuing to apply to all quarterly principal payments made after December 31, 2016, and the final maturity date of December 2, 2019. The 2017 US ARCA Amendment reduced the scheduled quarterly principal payments to $31 USD, commencing March 31, 2017, to continue until July 31, 2018, with a balloon payment of $4,438 on July 31, 2018. 

 

The US ARCA modified financial covenant testing so that testing will be performed on our consolidated financial statements. The financial covenants were changed pursuant to the US ARCA to require certain minimum working capital ratios, minimum EBITDA levels and effective tangible net worth levels for each fiscal quarter, which were further modified by the 2017 US ARCA Amendment. We are in compliance with most of the financial covenant testing and on March 6, 2017, we received a waiver from BMO on certain financial covenants existing as of December 31, 2016.

  

Our obligations under the U.S. Facilities are guaranteed by all our wholly-owned U.S. subsidiaries. In addition, we and our wholly-owned U.S. subsidiaries granted a security interest in substantially all of our assets, including 65% of the shares of Pioneer Electrogroup Canada Inc. held by us, to secure our obligations for borrowed money under the U.S. Facilities. The U.S. Facilities also restrict our ability to incur indebtedness, create or incur liens, make investments, make distributions or dividends and enter into merger agreements for the sale of any or all our assets.

 

As of December 31, 2016, we had approximately $17.9 million outstanding under our U.S. Credit Facilities. Our borrowings consisted of approximately $13.3 million outstanding under USD Facility A, and $4.6 million outstanding under USD Facility B.

 

As of December 31, 2015, we had approximately $14.1 million outstanding under our U.S. Credit Facilities. Our borrowings consisted of approximately $9.4 million outstanding under USD Facility A, and $4.7 million outstanding under USD Facility B.

 

Nexus Promissory Note

 

On July 25, 2012, Nexus Magneticos de Mexico, S. de R.L. de C.V., a subsidiary of Jefferson Electric, Inc., entered into a $1.7 million term loan agreement with GE CF Mexico, S.A. de C.V. The term loan from GE CF Mexico, S.A. de C.V. is payable in 60 consecutive monthly installments and bears interest, payable monthly, at a rate of 6.93% per annum. In December 2013, we elected to make a $250 advance payment against the Nexus Promissory Note. We provided a guaranty to GE CF Mexico, S.A. de C.V. of all of Nexus Magneticos de Mexico, S. de R.L. de C.V.’s obligations under the term loan agreement. During the fourth quarter of 2013, we prepaid $250 of the term loan and as of December 31, 2016 and 2015, there was approximately $0.2 million and $0.3 million outstanding, respectively.

 

 

31 
 

 

Titan Notes Payable

 

In connection with the acquisition of Titan, we assumed obligations to repay the remaining holders of unsecured notes. As of December 31, 2015 these notes were fully repaid.

 

Capital Lease Obligations

 

As of December 31, 2016 and 2015, we had an immaterial amount of capital lease obligations outstanding that were assumed in connection with the acquisition of Titan.

 

Capital Expenditures

 

Our additions to property, plant and equipment were $0.7 million during the year ended December 31, 2016, as compared to $1.1 million during the year ended December 31, 2015.

 

Factors That May Affect Future Operations

 

We believe that our future operating results will continue to be subject to quarterly variations based upon a wide variety of factors, including the cyclical nature of the electrical equipment industry and the markets for our products and services. Our operating results could also be impacted by a weakening of the Canadian dollar, changing customer requirements and exposure to fluctuations in prices of important raw supplies, such as copper, steel and aluminum. We attempt to minimize increases resulting from fluctuations in supply costs through the inclusion of escalation clauses with respect to commodities in our customer contracts. In addition to these measures, we attempt to recover other cost increases through improvements to our manufacturing efficiency and through increases in prices where competitively feasible. Lastly, other economic conditions we cannot foresee may affect customer demand. We predominately sell to customers in the utility, industrial production and commercial construction markets. Accordingly, changes in the condition of any of our customers may have a greater impact than if our sales were more evenly distributed between different end markets. For a further discussion of factors that may affect future operating results see the sections entitled “Risk Factors” and “Cautionary Note Regarding Forward-Looking Statements.”

 

Off Balance Sheet Transactions and Related Matters

 

Other than operating leases, we have no off-balance sheet transactions, arrangements, obligations (including contingent obligations), or other relationships with unconsolidated entities or other persons that have, or may have, a material effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.

 

New Accounting Pronouncements

 

The information required by this Item is provided in “Note 2. Summary of Significant Accounting Policies” to our audited financial statements for the year ended December 31, 2015 included in this Annual Report on Form 10-K.

 

Recent Accounting Pronouncements

 

In May 2014, the Financial Accounting Standards Board (“FASB”) issued update 2014-09, Accounting Standards Codification (“ASC”) 606, Revenue from Contracts with Customers. This guidance is a comprehensive new revenue recognition model that requires a company to recognize revenue to depict the transfer of goods or services to a customer at an amount that reflects the consideration it expects to receive in exchange for those goods or services. Accounting Standards Update (“ASU”) 2014-09 defines a five step process to achieve this core principle and, in doing so, more judgment and estimates may be required within the revenue recognition process than are required under existing U.S. GAAP. This standard is effective for annual periods beginning after December 15, 2016 and interim periods within those annual periods. Management is still assessing the impact of adoption on its consolidated financial statements. 

 

In July 2015, the FASB made a decision to defer the effective date of the new standard for one year and permit early adoption as of the original effective date.  The Company is currently reviewing its various revenue streams from its two reportable segments: (i) T&D Solutions and (ii) Critical Power. Concurrently, through the use of various data gathering methods, we are categorizing the types of sales for our business units for the purpose of comparing how we currently recognize revenue for the purpose of quantifying the impact, if any, that this new standard will have on our consolidated financial statements and we have not yet determined the method by which we will adopt the standard in 2018.  

 

In July 2015, the FASB issued ASU No. 2015-11, Inventory (Topic 330): Simplifying the Measurement of Inventory. This standard amends Topic 330, Inventory, which currently requires an entity to measure inventory at the lower of cost or market. Market could be replacement cost, net realizable value, or net realizable value less an approximately normal profit margin. When this standard is adopted, an entity should measure in scope inventory at the lower of cost and net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. The amendments are effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years.  We do not expect material impact of adopting ASU No. 2015-11 on our consolidated financial statements.

 

32 
 

 

In November 2015, the FASB issued No. 2015-17, Income Taxes (Topic 740), which requires that deferred tax liabilities and assets be classified as non-current in a classified statement of financial position. The current requirement that deferred tax liabilities and assets of a tax-paying component of an entity be offset and presented as a single amount is not affected by ASU No. 2015-17. ASU No. 2015-17 is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years, with early adoption permitted. A reporting entity may apply the provisions of ASU No. 2015-17 prospectively or retrospectively to all prior periods presented in the financial statements. The Company retrospectively adopted ASU No. 2015-17 in 2015 and has reflected the impact in the current and prior years in its statement of financial position.

 

In February 2016, the FASB issued ASU No. 2016-02, Leases (Topic 842), which requires, among other things, a lessee to recognize a liability representing future lease payments and a right-of-use asset representing its right to use the underlying asset for the lease term. For operating leases, a lessee will be required to recognize at inception a right-of-use asset and a lease liability equal to the net present value of the lease payments, with lease expense recognized over the lease term on a straight-line basis. For leases with a term of twelve months or less, ASU 2016-02 allows a reporting entity to make an accounting policy election to not recognize a right-of-use asset and a lease liability, and to recognize lease expense on a straight-line basis. ASU No. 2016-02 is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years, with early adoption permitted. Upon adoption, a reporting entity should apply the provisions of ASU 2016-02 at the beginning of the earliest period presented using a modified retrospective approach, which includes certain optional practical expedients that an entity may elect to apply. The Company is evaluating the potential impact on its consolidated financial statements of adopting ASU 2016-02.

 

In April 2016, the FASB issued ASU No. 2016-09, Compensation-Stock Compensation (Topic 718), Improvements to Employee Share-Based Payment Accounting”. Under ASU No. 2016-09, companies will no longer record excess tax benefits and certain tax deficiencies in additional paid-in capital (“APIC”). Instead, they will record all excess tax benefits and tax deficiencies as income tax expense or benefit in the income statement and the APIC pools will be eliminated. In addition, ASU No. 2016-09 eliminates the requirement that excess tax benefits be realized before companies can recognize them. ASU No. 2016-09 also requires companies to present excess tax benefits as an operating activity on the statement of cash flows rather than as a financing activity. Furthermore, ASU No. 2016-09 will increase the amount an employer can withhold to cover income taxes on awards and still qualify for the exception to liability classification for shares used to satisfy the employer’s statutory income tax withholding obligation. An employer with a statutory income tax withholding obligation will now be allowed to withhold shares with a fair value up to the amount of taxes owed using the maximum statutory tax rate in the employee’s applicable jurisdiction(s). ASU No. 2016-09 requires a company to classify the cash paid to a tax authority when shares are withheld to satisfy its statutory income tax withholding obligation as a financing activity on the statement of cash flows. Under current GAAP, it was not specified how these cash flows should be classified. In addition, companies will now have to elect whether to account for forfeitures on share-based payments by (1) recognizing forfeitures of awards as they occur or (2) estimating the number of awards expected to be forfeited and adjusting the estimate when it is likely to change, as is currently required. The amendments of this ASU are effective for reporting periods beginning after December 15, 2016, with early adoption permitted but all of the guidance must be adopted in the same period. We do not expect material impact of adopting ASU No. 2016-09 on our consolidated financial statements.

 

ITEM 7A.  QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

Not Applicable.

 

33 
 

 

ITEM 8.  FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

    Page
Consolidated Financial Statements for the Years Ended December 31, 2016 and 2015    
     
Report of Independent Registered Public Accounting Firm   35
Consolidated Statements of Operations   36
Consolidated Statements of Comprehensive Loss   37
Consolidated Balance Sheets   38
Consolidated Statements of Cash Flows   39
Consolidated Statements of Stockholders’ Equity   40
Notes to the Consolidated Financial Statements    41

 

34 
 

 

Report of Independent Registered Public Accounting Firm

 

Board of Directors and Stockholders 

Pioneer Power Solutions, Inc. 

Fort Lee, New Jersey

 

We have audited the accompanying consolidated balance sheets of Pioneer Power Solutions, Inc., as of December 31, 2016 and 2015 and the related consolidated statements of operations and comprehensive loss, stockholders’ equity, and cash flows for each of the two years in the period ended December 31, 2016.  These financial statements are the responsibility of the Company’s management.  Our responsibility is to express an opinion on these financial statements based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting.  Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.  An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation.  We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Pioneer Power Solutions, Inc., at December 31, 2016 and 2015, and the results of its operations and its cash flows for each of the two years in the period ended December 31, 2016, in conformity with accounting principles generally accepted in the United States of America.

 

/s/ BDO USA, LLP

New York, NY 

March 29, 2017 

 

35 
 

 

PIONEER POWER SOLUTIONS, INC. 

Consolidated Statements of Operations 

(In thousands, except per share data)

 

    For the Years Ended December 31,
    2016   2015
Revenues   $ 114,402     $ 106,522  
Cost of goods sold     90,991       85,085  
  Gross profit     23,411       21,437  
Operating expenses                
  Selling, general and administrative     19,994       21,527  
  Restructuring, integration and impairment     2,426       5,577  
  Foreign exchange gain     (364 )     (367 )
    Total operating expenses     22,056       26,737  
Operating income (loss)     1,355       (5,300 )
  Interest expense     1,736       748  
  Other (income) expense     (205 )     2,535  
Income (loss) before taxes     (176 )     (8,583 )
Income tax expense (benefit)     887       (2,702 )
Net loss   $ (1,063 )   $ (5,881 )
                 
Net loss per common share:                
  Basic   $ (0.12 )   $ (0.76 )
  Diluted   $ (0.12 )   $ (0.76 )
                 
Weighted average common shares outstanding:                
  Basic     8,700       7,746  
  Diluted     8,700       7,746  

  

The accompanying notes are an integral part of these consolidated financial statements

 

36

 


PIONEER POWER SOLUTIONS, INC. 

Consolidated Statements of Comprehensive Loss 

(In thousands) 

 

    For the Years Ended December 31,
    2016   2015
Net loss   $ (1,063 )   $ (5,881 )
Other comprehensive income (loss)                
  Foreign currency translation adjustments     (37 )     (2,468 )
  Amortization of net prior service costs and net actuarial losses, net of tax     (157 )     124  
Other comprehensive loss     (194 )     (2,344 )
  Comprehensive loss   $ (1,257 )   $ (8,225 )

  

The accompanying notes are an integral part of these consolidated financial statements 

 

37

 

 

PIONEER POWER SOLUTIONS, INC. 

Consolidated Balance Sheets 

(In thousands) 

  

    December 31,
    2016   2015
ASSETS        
Current assets        
Cash and cash equivalents   $ 246     $ 648  
Accounts receivable, net     17,508       14,223  
Inventories, net     26,147       17,663  
Income taxes receivable     72       576  
Prepaid expenses and other current assets     2,215       1,924  
Total current assets     46,188       35,034  
Property, plant and equipment, net     6,591       7,349  
Deferred income taxes     5,659       3,642  
Other assets     830       827  
Intangible assets, net     8,168       9,956  
Goodwill     9,972       10,068  
Total assets   $ 77,408     $ 66,876  
                 
LIABILITIES AND STOCKHOLDERS’ EQUITY                
Current liabilities                
Bank overdrafts   $ 1,200     $ 1,923  
Revolving credit facilities     17,689       9,874  
Short term borrowings     3,973       —    
Accounts payable and accrued liabilities     18,139       20,030  
Current maturities of long-term debt and capital lease obligations     1,379       6,037  
Income taxes payable     1,360       237  
Total current liabilities     43,740       38,101  
Long-term debt, net of current maturities     4,005       165  
Pension deficit     172       63  
Other long-term liability     892       372  
Deferred income taxes     2,400       781  
Total liabilities     51,209       39,482  
Stockholders’ equity                
Preferred stock, par value $0.001; 5,000,000 shares authorized; none issued     —         —    
Common stock, par value $0.001; 30,000,000 shares authorized; 8,699,712 shares issued and outstanding     9       9  
Additional paid-in capital     23,215       23,153  
Accumulated other comprehensive loss     (5,863 )     (5,669 )
Retained earnings     8,838       9,901  
Total stockholders’ equity     26,199       27,394  
Total liabilities and stockholders’ equity   $ 77,408     $ 66,876  

  

The accompanying notes are an integral part of these consolidated financial statements

 

38

 

 

PIONEER POWER SOLUTIONS, INC. 

Consolidated Statements of Cash Flows 

(In thousands)  

 

    Year Ended December 31,
    2016   2015
Operating activities        
Net loss   $ (1,063 )   $ (5,881 )
Depreciation     1,341       1,342  
Amortization of intangible assets     1,746       1,817  
Amortization of debt issuance cost     235       128  
Deferred income tax benefit     (405 )     (3,121 )
Gain on purchase of notes     —         (150 )
Change in receivable reserves     352       170  
Change in inventory reserves     (86 )     26  
Accrued pension     (53 )     (127 )
Stock-based compensation     62       231  
Impairments of fixed assets     —         2,581  
Loss on disposition of fixed assets     74       41  
Intangible asset impairment     110       428  
Imputed interest expenses     —         31  
Foreign currency remeasurement loss     (7 )     (32 )
Changes in current operating assets and liabilities:                
Accounts receivable     (3,560 )     (2,377 )
Inventories     (8,244 )     (4,866 )
Prepaid expenses and other assets     (153 )     (175 )
Income taxes     1,660       (285 )
Accounts payable and accrued liabilities     (1,467 )     6,256  
Net cash used in operating activities     (9,458 )     (3,963 )
                 
Investing activities                
Additions to property, plant and equipment     (668 )     (1,052 )
Proceeds from sale of fixed assets     50       —    
Business acquisitions, net of cash acquired     —         (2,106 )
Notes receivable     —         (243 )
Net cash used in investing activities     (618 )     (3,401 )
                 
Financing activities                
(Decrease)/increase in bank overdrafts     (716 )     1,923  
Short term borrowings     3,973       —    
Borrowings under debt agreement     36,394       36,365  
Repayment of debt     (29,441 )     (38,261 )
Payment of debt issuance costs     (251 )     (61 )
Net proceeds from issuance of common stock     —         4,553  
Net cash provided by financing activities     9,959       4,519  
                 
Decrease in cash and cash equivalents     (117 )     (2,845 )
Effect of foreign exchange on cash and cash equivalents     (285 )     (339 )
                 
Cash and cash equivalents                
Beginning of year     648       3,832  
End of period   $ 246     $ 648  
                 
Supplemental cash flow information:                
Interest paid   $ 1,258     $ 606  
Income taxes paid, net of refunds     (322 )     435  
Non-cash investing activities:                
Forgiveness of indebtedness due to purchaser   $ —       $ 609  

 

The accompanying notes are an integral part of these consolidated financial statements

 

39

 

 

PIONEER POWER SOLUTIONS, INC. 

Consolidated Statements of Stockholders’ Equity 

(Dollars in thousands)

 

            Accumulated        
            Additional   other       Total
    Common Stock   paid-in   comprehensive   Retained   stockholders'
    Shares   Amount   capital   loss   earnings   equity
Balance - January 1, 2015     7,405,962     $ 7     $ 18,370     $ (3,325 )   $ 15,782     $ 30,834  
Net Loss     —         —         —         —         (5,881 )     (5,881 )
Stock-based compensation     —         —         231       —         —         231  
Foreign currency translation adjustment     —         —         —         (2,468 )     —         (2,468 )
Pension adjustment, net of taxes     —         —         —         124       —         124  
Issuance of common stock in connection with a public offering at $4.00 per share, net of issuance cost     1,293,750       2       4,552       —         —         4,554  
Balance - December 31, 2015     8,699,712     $ 9     $ 23,153     $ (5,669 )   $ 9,901     $ 27,394  
Net Loss     —         —         —         —         (1,063 )     (1,063 )
Stock-based compensation     —         —         62       —         —         62  
Foreign currency translation adjustment     —         —         —         (37 )     —         (37 )
Pension adjustment, net of taxes     —         —         —         (157 )     —         (157 )
Balance - December 31, 2016     8,699,712     $ 9     $ 23,215     $ (5,863 )   $ 8,838     $ 26,199  

  

The accompanying notes are an integral part of these consolidated financial statements

 

40

 

 

1. BASIS OF PRESENTATION

 

Pioneer Power Solutions, Inc. and its wholly owned subsidiaries (referred to herein as the “Company,” “Pioneer,” “we,” “our” and “us”) manufacture, sell and service a broad range of specialty electrical transmission, distribution and on-site power generation equipment for applications in the utility, industrial, commercial and backup power markets. The Company is headquartered in Fort Lee, New Jersey and operates from twelve (12) additional locations in the U.S., Canada and Mexico for manufacturing, centralized distribution, engineering, sales and administration.

 

Acquisitions

 

On January 16, 2015, the Company acquired substantially all the assets of Harmonics Holdings Inc. (doing business as “Harmonics Limited” or “Harmonics”), a New Haven, Connecticut based specialty provider of equipment that incorporates a patented technology for the elimination of harmonic currents in power distribution systems. See Note 3 – Acquisitions.

 

On August 1, 2015, the Company acquired substantially all of the assets of Pacific Power Systems Integration, Inc., a Santa Fe Springs, California based manufacturer of custom electrical power distribution and control equipment, with a specific emphasis on low voltage draw-out, metal-enclosed and metal-clad switchgear. See Note 3 – Acquisitions.

 

NASDAQ Listing

 

On September 24, 2013, the Company completed an underwritten public offering of 1,265,000 shares of its common stock at a gross sales price of $7.00 per share, resulting in net proceeds to the Company of approximately $7.9 million, after deducting underwriting discounts and commissions and other offering expenses. In connection with the public offering, the Company’s common stock began trading on the Nasdaq Capital Market under the symbol PPSI.

 

In September 2015, the Company completed a public offering and issued 1,125,000 shares of its common stock at a gross sales price of $4.00 per share, resulting in $3.9 million in net proceeds after deducting the underwriting discount and costs directly attributable to the offering. Subsequent to the end of the third quarter, on October 5, 2015, the underwriters exercised their over-allotment option to purchase an additional 168,750 shares from the Company at the public offering price of $4.00 per share, resulting in an additional $0.6 million in net proceeds after deducting the underwriting discount.

 

Segments

 

In determining operating and reportable segments in accordance with ASC 280, Segment Reporting (“ASC 280”), the Company concluded that it has two reportable segments, which are also our operating segments: Transmission & Distribution Solutions (“T&D Solutions”) and Critical Power Solutions.  As a result of the restructuring plans implemented during calendar year 2015, the activities of our Pioneer Critical Power switchgear operations have been transferred to the T&D Solutions segment as of January 1, 2016. For comparison purposes, prior periods presented have been adjusted to reflect this reclassification. Financial information about the Company’s segments is presented in Note 16 – Business Segment, Geographic and Customer Information.

 

Classification of Expenses

 

As the Company implemented the remediation plans discussed under the heading “Item 9A. Controls and Procedures” of this Annual Report on Form 10-K, the Company has determined that there were inconsistencies in classification of expenses between its business units. As a result, the Company has reclassified certain expenses from cost of goods sold to operating expenses for the year ended December 31, 2016. The Company has made the same reclassification to the results for the year ended December 31, 2015, resulting in an increase to gross profit of $332, or 0.31% as a percentage of sales as presented for this period.

  

Rounding

 

All dollar amounts (except share and per share data) presented are stated in thousands of dollars, unless otherwise noted. Amounts may not foot due to rounding.

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

 

General

 

The preparation of consolidated financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

 

Principles of Consolidation

 

The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated in consolidation. 

 

Reclassifications

 

Certain reclassifications have been made in prior years’ financial statements to conform to the presentation used in the current year. These reclassifications have not resulted in any changes to the previously reported net income for any year.

 

41

 

 

Use of Estimates

 

The preparation of financial statements in accordance with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. The financial statements include estimates based on currently available information and management’s judgment as to the outcome of future conditions and circumstances. Significant estimates in these financial statements include allowance for doubtful accounts receivable, inventory provision, useful lives and impairment of long-lived assets, income tax provision, goodwill impairment, cost of pension benefits and estimates related to purchase price allocation.

 

Changes in the status of certain facts or circumstances could result in material changes to the estimates used in the preparation of the financial statements and actual results could differ from the estimates and assumptions.

 

Revenue Recognition

 

Revenue is recognized when (1) persuasive evidence of an arrangement exists, (2) delivery occurs, (3) the sales price is fixed or determinable, (4) collectability is reasonably assured and (5) customer acceptance criteria, if any, has been successfully demonstrated. Revenue is recognized on the sale of goods, when the significant risks and rewards of ownership have been transferred to the buyer upon delivery, provided that the Company maintains neither managerial involvement to the degree usually associated with ownership, nor effective control over the goods sold. There are no further obligations on the part of the Company subsequent to revenue recognition, except when customers have the right of return or when the Company warrants the product. The Company records a provision for future returns, based on historical experience at the time of shipment of products to customers. The Company warrants some of its products against defects in design, materials and workmanship for periods ranging primarily from one to ten years depending on the model. The Company records a provision for estimated future warranty costs based on the historical relationship of warranty claims to sales at the time of shipment of products to customers. The Company periodically reviews the adequacy of its product warranties and adjusts, if necessary, the warranty percentage and accrued warranty reserve for actual experience.

 

Service revenue primarily consists of preventative maintenance and monitoring services, as well as the provision of after-market support related to equipment sales and project commissioning service revenue. Revenues from these services are recognized when the service is performed and the customer has accepted the work.

 

Cost of Goods Sold

 

Cost of goods sold for the T&D Solutions and Critical Power segments primarily includes charges for materials, direct labor and related benefits, freight (inbound and outbound), direct supplies and tools, purchasing and receiving costs, inspection costs, internal transfer costs, warehousing costs and utilities related to production facilities and, where appropriate, an allocation of overhead.  Cost of goods sold for Critical Power Solutions also includes indirect labor and infrastructure cost related to the provision of field services.

  

Financial Instruments

 

The Company’s financial instruments consist primarily of cash and cash equivalents, receivables, payables and debt instruments. The carrying values of these financial instruments approximate their respective fair values as they are either short-term in nature or carry interest rates which are periodically adjusted to market rates. Unless otherwise indicated, the carrying value of these financial instruments approximates their fair market value.

 

Cash and Cash Equivalents

 

Cash and cash equivalents comprise cash on hand, demand deposits and investments with an original maturity at the date of purchase of three months or less.

 

Accounts Receivable

 

The Company accounts for trade receivables at original invoice amount less an estimate made for doubtful receivables based on a review of all outstanding amounts on a monthly basis. Management determines the allowance for doubtful accounts by regularly evaluating individual customer receivables and considering a customer’s financial condition, credit history and current economic conditions. The Company writes off trade receivables when they are deemed uncollectible. The Company records recoveries of trade receivables previously written off when it receives them. Management considers the Company’s allowance for doubtful accounts, which was $0.6 million as of December 31, 2016 and 2015, sufficient to cover any exposure to loss in its accounts receivable.

 

42

 

 

Long-Lived Assets

 

Depreciation and amortization for property, plant and equipment, and finite life intangible assets, is computed and included in cost of goods sold and in selling and administrative expense, as appropriate. Long-lived assets, consisting primarily of property, plant and equipment, are stated at cost less accumulated depreciation. Property, plant and equipment are depreciated using the straight line method, based on the estimated useful lives of the assets (buildings – 25 years, machinery and equipment - 5 to 15 years, computer hardware and software - 3 to 5 years, furniture & fixtures 5 to 7 years, leasehold improvements – term of lease). Depreciation commences in the year the assets are ready for their intended use. As a convention, in the initial year, the Company takes one half year of depreciation expense on all assets.

 

Finite life intangible assets consist primarily of customer relationships in multiple categories that are specific to the businesses acquired and for which estimated useful lives were determined based on actual historical customer attrition rates. The Company’s other finite life intangible assets consist of non-compete agreements, which have defined terms, certain trademarks which the Company has elected to gradually discontinue, and internally-developed software. These finite life intangible assets are amortized by the Company over periods ranging from one to twenty years.

 

Long-lived assets and finite life intangible assets are reviewed for impairment whenever events or circumstances have occurred that indicate the remaining useful life of the asset may warrant revision or that the remaining balance of the asset may not be recoverable. Upon indications of impairment, or in the normal course of annual testing, assets and liabilities are grouped at the lowest level for which identifiable cash flows are largely independent of the cash flows of other assets and liabilities. The measurement of possible impairment is generally estimated by the ability to recover the balance of an asset group from its expected future operating cash flows on an undiscounted basis. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset exceeds the fair value thereof. Determining asset groups and underlying cash flows requires the use of significant judgment. As described in Note 9, in 2015, due to relocation of Bemag, the Company recorded an impairment charge of $261 for customer relationships.

 

Goodwill and Indefinite Life Intangible Assets

 

Goodwill was generated through the acquisitions made by the Company between 2010 and 2015.  As the total consideration paid exceeded the value of the net assets acquired, the Company recorded goodwill for each of the completed acquisitions.  At the date of acquisition, the Company performed a valuation to determine the value of the intangible assets, and the allocation of the purchase price to the assets and liabilities acquired.  The goodwill is attributable to synergies and economies of scale provided to us by the acquired entity.

 

The Company tests its goodwill and indefinite-lived intangible asset for impairment at least annually and whenever events or circumstances change that indicate impairment may have occurred. In 2015, the Company changed its annual testing date from December 31 to October 1. The Company believes this change in the timing of applying an accounting principle is preferable, as it allows for a more robust fair value assessment. This change in annual testing date does not delay, accelerate, or avoid an impairment charge. A significant amount of judgment is involved in determining if an indicator of impairment has occurred. Such indicators may include, among others: a significant decline in the Company’s expected future cash flows; a sustained, significant decline in the Company’s stock price and market capitalization; a significant adverse change in legal factors or in the business climate of its segments; unanticipated competition; and slower growth rates. Any adverse change in these factors could have a significant impact on the recoverability of goodwill, the indefinite-lived intangible assets and the Company’s consolidated financial results. As described in Note 9, the company recorded an impairment charge of $110 and $143 against technology related industry accreditations in 2016 and 2015, respectively. 

 

Reportable segments are defined in Note 1 Basis of Presentation.

 

The Company tests its goodwill for impairment at the reporting unit level, which is an operating segment or a segment that is one level below its operating segments. An operating segment is defined by ASC 280-10-50 as a component of an enterprise that earns revenue and incurs expenses, of which discrete financial information is available. During the second quarter of 2015, the Company began evaluating improvement strategies to reorganize, simplify and cut costs from operations through closer business integration which reduced the number of reporting units to four in 2015. The goodwill has been assigned to the reporting unit to which the value relates. Three of the Company’s four reporting units have goodwill. The Company tests goodwill by estimating the fair value of the reporting unit using a discounted cash flow model and other valuation techniques, but may elect to perform a qualitative analysis. A quantitative analysis is used to determine an estimated fair value representing the amount at which a reporting unit could be bought or sold in a current transaction between willing parties on an arms-length basis. The estimated fair value of each reporting unit is derived using a discounted cash flow method based on market and reporting unit-specific assumptions, including estimated future revenues and expenses, weighted average cost of capital, capital expenditures, the useful life over which cash flows will occur and other assumptions which are considered reasonable and inherent in discounted cash flow analysis. A qualitative analysis is performed by assessing certain trends and factors, including projected market outlook and growth rates, forecasted and actual sales and operating profit margins, discount rates, industry data and other relevant qualitative factors. These trends and factors are compared to, and based on, the assumptions used in the most recent quantitative assessment.

 

43

 

 

Indefinite life intangible assets consist primarily of trademarks. The fair value of these assets are determined using a royalty relief methodology similar to that employed when the associated assets were acquired, but using updated estimates of future sales, cash flows and profitability.

 

During the Company’s 2016 annual impairment tests of goodwill and indefinite life intangible assets, management identified an impairment of an indefinite-lived intangible asset in its T&D segment and recognized an impairment charge of $110 since the asset was no longer actively used by the Company. The Company’s 2015 quantitative impairment test identified no impairment of goodwill or indefinite life intangibles. See Note 9 ‒ Goodwill and Other Intangible Assets for further information on the impairment charge of $261 and $143 for customer relationship and technology related industry accreditations recorded in 2015 due to relocation of Bemag.

 

Foreign Currency Translation

 

The functional currency for the Companies foreign subsidiaries is the local currency in which the entity is located. The financial statements of all subsidiaries with a functional currency other than the U.S. dollar have been translated into U.S. dollars. All assets and liabilities of foreign operations are translated into U.S. dollars using year-end exchange rates, and all revenues and expenses are translated at weighted average rates during the respective period. The U.S. dollar results that arise from such translation, as well as exchange gains and losses on intercompany balances of a long-term investment nature, are included in the cumulative currency translation adjustments in accumulated other comprehensive income in stockholders’ equity. Gains and losses resulting from foreign currency transactions are included in earnings.

 

Income Taxes

 

The Company accounts for income taxes under the asset and liability method, based on the income tax laws and rates in the countries in which operations are conducted and income is earned. This approach requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of temporary differences between the carrying amounts and the tax basis of assets and liabilities. Developing the provision for income taxes requires significant judgment and expertise in federal, international and state income tax laws, regulations and strategies, including the determination of deferred tax assets and liabilities and, if necessary, any valuation allowances that may be required for deferred tax assets. The Company records a valuation allowance to reduce its deferred tax assets to the amount that is more likely than not to be realized. The Company believes that the deferred tax asset recorded as of December 31, 2016 and 2015, is realizable through future reversals of existing taxable temporary differences and future taxable income. If the Company was to subsequently determine that it would be able to realize deferred tax assets in the future in excess of its net recorded amount, an adjustment to deferred tax assets would increase net income for the period in which such determination was made. The Company will continue to assess the adequacy of the valuation allowance on a quarterly basis. The Company’s judgments and tax filings are subject to audit by various taxing authorities.

 

The objective of accounting for income taxes is to recognize the amount of taxes payable or refundable for the current year and deferred tax liabilities and assets for the future tax consequences or events that have been recognized in the Company’s financial statements or tax returns. The Company recognizes the tax benefit from an uncertain tax position only if it is more likely than not that the tax position will be sustained on examination by the taxing authorities, based on the technical merits of the position (see “Unrecognized Tax Benefits” below). 

 

Income tax related interest and penalties are grouped with interest expense on the consolidated statement of operations.

 

Unrecognized Tax Benefits

 

The Company accounts for unrecognized tax benefits in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) “Income Taxes” (“ASC 740”). ASC 740 prescribes a recognition threshold that a tax position is required to meet before being recognized in the financial statements and provides guidance on de-recognition, measurement, classification, interest and penalties, accounting in interim periods, disclosure and transition issues. ASC 740 contains a two-step approach to recognizing and measuring uncertain tax positions. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained upon ultimate settlement with a taxing authority, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement.

 

Additionally, ASC 740 requires the Company to accrue interest and related penalties, if applicable, on all tax positions for which reserves have been established consistent with jurisdictional tax laws.  See Note 14 ‒ Income Taxes.

 

44

 

 

Share-Based Payments

 

The Company accounts for share based payments in accordance with the provisions of FASB ASC 718 “Compensation – Stock Compensation” and accordingly recognizes in its financial statements share based payments at their fair value. In addition, it recognizes in the financial statements an expense based on the grant date fair value of stock options granted to employees and directors. The expense is recognized on a straight line basis over the expected option life while taking into account the vesting period and the offsetting credit is recorded in additional paid-in capital. Upon exercise of options, the consideration paid together with the amount previously recorded as additional paid-in capital is recognized as capital stock. The Company estimates its forfeiture rate in order to determine its compensation expense arising from stock based awards. The Company uses the Black-Scholes Merton option pricing model to determine the fair value of the options. Non-employee members of the Board of Directors are deemed to be employees for the purposes of recognizing share-based compensation expense. 

 

Employee Benefit Plan

 

The Company sponsors a defined benefit plan as described in Note 15 ‒ Pension Plan. The cost of pension benefits earned by employees is actuarially determined using the accumulated benefit method and a discount rate, used to measure interest cost on the accrued employee future benefit obligation, based on market interest rates on high-quality debt instruments with maturities that match the timing and benefits expected to be paid by the plan. Plan assets are valued using current market values and the expected return on plan assets is based on the net asset value of the plan assets. The costs that relate to employee current service are charged to income annually.

 

The transitional obligation created upon adoption of the FASB ASC 715 “Compensation – Retirement Benefits” is amortized over the average remaining service period of employees. For a given year, unrecognized actuarial gains or losses are recognized into income if the unamortized balance at the beginning of the year is more than 10% of the greater of the plan asset or liability balance. Any unrecognized actuarial gain or loss in excess of this threshold is recognized in income over the remaining service period of the employees. 

 

The Company reflects the funded status of its defined pension plans as a net asset or net liability in its balance sheet, with an offsetting amount in accumulated other comprehensive income, and recognizes changes in that funded status in the year in which the changes occur through comprehensive income.

 

Inventories

 

Inventories are stated at the lower of cost or market using first-in, first-out (FIFO) or weighted-average methods and include the cost of materials, labor and manufacturing overhead. The Company uses estimates in determining the level of reserves required to state inventory at the lower of cost or market. The Company estimates are based on market activity levels, production requirements, the physical condition of products and technological innovation. Changes in any of these factors may result in adjustments to the carrying value of inventory. See Note 6.

 

Income (Loss) Per Share

 

Basic income (loss) per share is computed by dividing the income (loss) for the period by the weighted average number of common shares outstanding during the period. Diluted income (loss) per share is computed by dividing the income (loss) for the period by the weighted average number of common and common equivalent shares outstanding during the period. (see Note 17 ‒ Basic and Diluted Net Income (Loss) Per Share).

 

Fair Value Measurements

 

FASB ASC 820 “Fair Value Measurement and Disclosure” applies to all assets and liabilities that are being measured and reported on a fair value basis. ASC 820 establishes a framework for measuring fair value in U.S GAAP, and expands disclosure about fair value measurements. ASC 820 enables the reader of the financial statements to assess the inputs used to develop those measurements by establishing a hierarchy for ranking the quality and reliability of the information used to determine fair values. ASC 820 requires that assets and liabilities carried at fair value be classified and disclosed in one of the following three categories:

 

Level 1: Quoted market prices in active markets for identical assets or liabilities.

Level 2: Observable market based inputs or unobservable inputs that are corroborated by market data.

Level 3: Unobservable inputs that are not corroborated by market data.

 

In determining the appropriate levels, the Company performs a detailed analysis of the assets and liabilities that are subject to ASC 820, consisting primarily of cash and cash equivalents, receivables, payables and debt instruments. At each reporting period, all assets and liabilities for which the fair value measurement is based on significant unobservable inputs are classified as Level 3.

 

45

 

 

The fair value represents management’s best estimates based on a range of methodologies and assumptions. The carrying value of receivables and payables arising in the ordinary course of business approximate fair value because of the relatively short period of time between their origination and expected realization. These items have been classified as Level 1.

 

The Company’s financial instruments consist primarily of cash and cash equivalents, receivables, payables and debt instruments. The carrying values of these financial instruments approximate their respective fair values as they are either short-term in nature or carry interest rates which are periodically adjusted to market rates. Unless otherwise indicated, the carrying value of these financial instruments approximates their fair market value.

 

Reclassification of Long-Term Debt

 

The financial statements included in this annual report have been prepared assuming that we will continue as a going concern, which contemplates the recoverability of assets and the satisfaction of liabilities in the normal course of business.  Significant assumptions underlie this belief, including, among other things, that there will be no material adverse developments in our business, liquidity, capital requirements and that our credit facilities with our lender will remain available to us and will not need to be replaced. In addition, we did not duly pay and discharge our payroll tax obligations in a manner compliant with the covenant requirements of our U.S. Facilities during 2014 and 2015. (see Note 5 – Other (Income) / Expense).

 

Based on these determinations,  we began discussions with our lender and secured a waiver of defaults dated November 18, 2015 with respect to our U.S. credit agreement and our Canadian letter loan agreement, to suspend testing of the existing financial defaults until January 31, 2016 and to permit borrowings of up to $3.0 million by our Canadian subsidiary in order to provide financial support to our U.S. operations, subject to the satisfaction of new financial reporting requirements and other conditions. This waiver was subsequently extended to April 30, 2016, and the amount of borrowings increased up to $5.0 million by our Canadian subsidiary in order to provide financial assistance to our US operations. As a result of this noncompliance, all outstanding long-term debt with the lender was classified as a current liability at December 31, 2015.

 

On April 29, 2016 we executed an amended and restated credit agreement (“ARCA”) of our credit facilities from the Bank for Montreal. With the execution of the ARCA, portions of the credit facilities were classified as long term indebtedness. This ARCA contains revised covenants and funding amounts that finance our cash requirements for anticipated operating activities, restructuring and integration plans, capital improvements and scheduled principal repayments of long-term debt. The ARCA was to expire on July 31, 2017. On March 15, 2017, the ARCA was extended to July 31, 2018. Accordingly, long-term debt is classified as a non-current liability at December 31, 2016. 

 

Recent Accounting Pronouncements

 

There have been no recent accounting pronouncements not yet adopted by the Company which would have a material impact on the Company’s financial statements.

 

Revenue from Contracts with Customers. In May 2014, the FASB issued Accounting Standards Update No. 2014-09 (“ASU 2014-09”), which supersedes nearly all existing revenue recognition guidance under U.S. GAAP. The core principle of ASU 2014-09 is to recognize revenues when promised goods or services are transferred to customers in an amount that reflects the consideration to which an entity expects to be entitled for those goods or services. ASU 2014-09 defines a five step process to achieve this core principle and, in doing so, more judgment and estimates may be required within the revenue recognition process than are required under existing U.S. GAAP.

 

In July 2015, the FASB made a decision to defer the effective date of the new standard for one year and permit early adoption as of the original effective date.  The Company is currently reviewing its various revenue streams from its two reportable segments: (i) T&D Solutions and (ii) Critical Power. Concurrently, through the use of various data gathering methods, we are categorizing the types of sales for our business units for the purpose of comparing how we currently recognize revenue for the purpose of quantifying the impact, if any, that this new standard will have on our consolidated financial statements and we have not yet determined the method by which we will adopt the standard in 2018. 

 

Simplifying the Measurement of Inventory. In July 2015, the FASB issued ASU No. 2015-11, Inventory (Topic 330): Simplifying the Measurement of Inventory. This standard amends Topic 330, Inventory, which currently requires an entity to measure inventory at the lower of cost or market. Market could be replacement cost, net realizable value, or net realizable value less an approximately normal profit margin. When this standard is adopted, an entity should measure in scope inventory at the lower of cost and net realizable value. Net realizable value is the estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. The amendments are effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years.  The Company does not expect material impact of adopting ASU No. 2015-11 on its consolidated financial statements.

  

Balance Sheet Classification of Deferred Taxes. In November 2015, the FASB issued No. 2015-17, Income Taxes (Topic 740), which requires that deferred tax liabilities and assets be classified as non-current in a classified statement of financial position. The current requirement that deferred tax liabilities and assets of a tax-paying component of an entity be offset and presented as a single amount is not affected by ASU No. 2015-17. ASU No. 2015-17 is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years, with early adoption permitted. A reporting entity may apply the provisions of ASU No. 2015-17 prospectively or retrospectively to all prior periods presented in the financial statements. The Company retrospectively adopted ASU No. 2015-17 in 2015 and has reflected the impact in the current and prior years in its statement of financial position.

 

 

46

 

 

Leases. In February 2016, the FASB issued ASU No. 2016-02, Leases (Topic 842), which requires, among other things, a lessee to recognize a liability representing future lease payments and a right-of-use asset representing its right to use the underlying asset for the lease term. For operating leases, a lessee will be required to recognize at inception a right-of-use asset and a lease liability equal to the net present value of the lease payments, with lease expense recognized over the lease term on a straight-line basis. For leases with a term of twelve months or less, ASU 2016-02 allows a reporting entity to make an accounting policy election to not recognize a right-of-use asset and a lease liability, and to recognize lease expense on a straight-line basis. ASU No. 2016-02 is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years, with early adoption permitted. Upon adoption, a reporting entity should apply the provisions of ASU 2016-02 at the beginning of the earliest period presented using a modified retrospective approach, which includes certain optional practical expedients that an entity may elect to apply. The Company does not expect material impact on its consolidated financial statements of adopting ASU 2016-02.

 

Share-Based Compensation. In April 2016, the FASB issued ASU No. 2016-09, Compensation-Stock Compensation (Topic 718), Improvements to Employee Share-Based Payment Accounting”. Under ASU No. 2016-09, companies will no longer record excess tax benefits and certain tax deficiencies in additional paid-in capital (“APIC”). Instead, they will record all excess tax benefits and tax deficiencies as income tax expense or benefit in the income statement and the APIC pools will be eliminated. In addition, ASU No. 2016-09 eliminates the requirement that excess tax benefits be realized before companies can recognize them. ASU No. 2016-09 also requires companies to present excess tax benefits as an operating activity on the statement of cash flows rather than as a financing activity. Furthermore, ASU No. 2016-09 will increase the amount an employer can withhold to cover income taxes on awards and still qualify for the exception to liability classification for shares used to satisfy the employer’s statutory income tax withholding obligation. An employer with a statutory income tax withholding obligation will now be allowed to withhold shares with a fair value up to the amount of taxes owed using the maximum statutory tax rate in the employee’s applicable jurisdiction(s). ASU No. 2016-09 requires a company to classify the cash paid to a tax authority when shares are withheld to satisfy its statutory income tax withholding obligation as a financing activity on the statement of cash flows. Under current GAAP, it was not specified how these cash flows should be classified. In addition, companies will now have to elect whether to account for forfeitures on share-based payments by (1) recognizing forfeitures of awards as they occur or (2) estimating the number of awards expected to be forfeited and adjusting the estimate when it is likely to change, as is currently required. The Amendments of this ASU are effective for reporting periods beginning after December 15, 2016, with early adoption permitted but all of the guidance must be adopted in the same period. The Company does not expect material impact of adopting ASU No. 2016-09 on its consolidated financial statements.

 

3. ACQUISITIONS

 

Since January 1, 2015, the Company has acquired two businesses in the U.S. These acquisitions have allowed the Company to expand its products and service capabilities and offer its customers a greater breadth of solutions for their electrical power distribution and backup power needs. A summary of the acquisitions is as follows:

 

Business Acquired   Closing   Net Assets Acquired
(in 000s)
  Segment   Primary Form of Consideration
Harmonics Holdings Inc.   01/16/15           1,043   T&D Solutions   Seller note/debt forgiveness 
Pacific Power Systems Integration, Inc.   08/01/15           2,013   T&D Solutions   Cash 
              3,056        

 

Each of the acquired businesses has been included in the Company’s results of operations since the date of its respective closing.

 

On January 16, 2015, the Company, through its Jefferson Electric, Inc. subsidiary, acquired substantially all the assets comprising the business of Harmonics Holdings Inc. (“Harmonics”), consisting primarily of intellectual property, accounts receivable and machinery and equipment. Harmonics is a Connecticut-based specialty provider of equipment that incorporates a patented technology for the elimination of harmonic currents in power distribution systems. The transaction was accounted for under the acquisition method of accounting and the Company funded the acquisition from available cash on hand, a seller note and forgiveness of debt.  

 

On August 1, 2015, the Company, through its Pioneer Custom Electrical Products Corp. subsidiary, acquired substantially all the assets comprising the business of Pacific Power Systems Integration, Inc. (“Pacific”). Located in Santa Fe Springs, California, Pacific is a manufacturer of low and medium voltage switchgear, primarily serving customers in the oil refining, mass transit and utility sectors. The transaction was accounted for under the acquisition method of accounting and the Company funded the cash consideration for the acquisition with debt drawn under one of the Company’s revolving credit facilities.

 

47

 

 

The following table summarizes the consideration paid for the Harmonics and Pacific acquisitions and presents the allocation of the amount to the net tangible and identifiable intangible assets based on their estimated fair values as of January 16, 2015 and August 1, 2015, respectively:

 

    Harmonics Acquisition     Pacific Acquisition  
Purchase Price                
Cash consideration   $ 93     $ 2,013  
Forgiveness of trade payables and indebtedness due to purchaser     609        
Deferred payments due to seller     341        
    $ 1,043     $ 2,013  
                 
Initial Purchase Price Allocation                
Current assets   $ 21     $ 18  
Property, plant and equipment     4       182  
Identifiable intangible assets     995       1,562  
Goodwill     23       251  
Net assets acquired   1,043     2,013  

 

The acquisitions resulted in the recognition of goodwill in the Company’s consolidated financial statements because the purchase prices exceeded the net tangible asset values, and reflects the future net income and cash flow potential of the acquired businesses.

 

The following table summarizes the major classes of intangible assets arising from the acquisition of Harmonics and Pacific, their respective amortization periods, and the amount of amortization expense recognized during the year ended December 31, 2016:

 

    Weighted Average
Amortization Years
    Harmonics Acquisition  
Acquired Intangible Assets                
Customer relationships     10     $ 319  
Non-compete agreements     5       75  
Developed technology     10       492  
Trademark     Indefinite       26  
   Technology-related industry accreditations     Indefinite       83  
            $ 995  
                 
Amortization expense recorded during the year ended December 31, 2016           $ 93  

 

    Weighted Average
Amortization Years
    Pacific Acquisition  
Acquired Intangible Assets (a)                
Customer relationships     13     $ 512  
Non-compete agreements     7       180  
   Technology-related industry accreditations     Indefinite       870  
            $ 1,562  
                 
Amortization expense recorded during the year ended December 31, 2016           $ 62  

 

(a) In connection with completing its purchase price allocation, certain assets were identified and reclassed in 2016.

 

48

 

 

The Company incurred approximately $13 of transaction costs related to the Harmonics acquisition, and $43 related to the Pacific acquisition, during the year ended December 31, 2015 that are reflected in the Company’s statement of operations as a period expense.

 

The Company reported Harmonics and Pacific results of operations in the T&D Solutions segment for the year ended December 31, 2016 and 2015.

 

There were no acquisitions in 2016.

 

4. RESTRUCTURING AND IMPAIRMENT

 

During the second quarter of 2015, the Company began evaluating improvement strategies intended to reorganize, simplify and reduce costs from operations through closer business integration, pursuant to a restructuring and integration plan to be carried out in stages with an original completion date by mid-2016.

 

In August 2015, management finalized and commenced execution of its plan, which included a consolidation of the Company’s six manufacturing facilities into three locations, workforce reductions, staff relocations and measures to more closely align product lines and supply chains across business units, among other actions that have resulted in the recognition of certain restructuring, integration and impairment expenses.

 

During 2016, in the T&D Segment, the relocation of our Medium Voltage Transformer line was begun as of the end of 2016, and will be completed in the first half of 2017. In the Critical Power segment, the relocation of the facility begun in 2015 and completed in 2016 resulted in additional costs incurred in 2016.

 

The following is a summary of the components of restructuring, integration and impairment expenses, before taxes, during the years ended December 31, 2016 and 2015:

 

    T&D     Critical Power        
Year Ended December 31, 2016   Segment     Segment     Total  
Lease termination and other facility costs   $ 1,220     $     $ 1,220  
Business integration expenses     900             900  
Other costs     274       32       306  
Pre-tax restructuring, integration and impairment expense   $ 2,394     $ 32     $ 2,426  

 

For the year ended December 31, 2016, the lease termination and other facility costs include contract exit and excess production costs due to deferring relocation of Bemag. Business integration expenses include inventory obsolescence as a result of product line integration and relocation costs of Bemag’s low voltage production facility. Other costs consist primarily of cost over runs on the 2015 restructuring accruals.

 

    T&D     Critical Power        
Year Ended December 31, 2015   Segment     Segment     Total  
Employee severance and related costs   $ 564     $     $ 564  
Lease termination and other facility costs     168       80       248  
Business integration expenses (a)     1,570             1,570  
Asset impairments     2,792             2,792  
Other costs     403             403  
Pre-tax restructuring, integration and impairment expense   $ 5,497     $ 80     $ 5,577  

 

(a) Due to the reorganization, certain operations were transferred from Critical Power to T&D Segment.

 

For the year ended December 31, 2015, employee severance and related costs consists of retention pay and severance benefits. Lease termination and other facility costs include contract termination and exit costs. Business integration expenses include inventory obsolescence as a result of product line integration, travel, and third-party information technology costs. Asset impairments includes the write-downs of the Company’s Canadian dry-type transformer facility, excess machinery and equipment held for sale in preparation for the plant consolidations and certain intangible assets associated with products the Company no longer expects to continue to produce and sell. Other costs consist primarily of legal expenses incurred in connection with implementing the restructuring plan.

 

Charges associated with each action were included in restructuring, integration and impairment expenses in our consolidated statement of operations, and reflected in our table of Operating Income (Loss) by segment group in Note 16 – Business Segment and Geographic Information.

 

49

 

 

The components and changes in the Company’s restructuring liability were as follows:

 

                Facility              
    Severance and     Product Line     Closure and     Asset        
    Related     Harmonization     Exit Costs     Write-downs     Total  
Restructuring liability as of January 1, 2015   $     $     $     $     $  
Restructuring, integration and impairment expense     565       64       1,395       3,553       5,577  
Cash paid     (120 )     (21 )     (1,327 )           (1,468 )
Other                       (3,553 )     (3,553 )
Foreign currency translation                 23             23  
Restructuring liability as of December 31, 2015   $ 445     $ 43     $ 91           $ 579  
Restructuring and integration expense                 2,426             2,426  
Cash paid     (332 )           (1,335 )           (1,667 )
Other                 (590 )           (590 )
Foreign currency translation           3                   3  
Restructuring liability as of December 31, 2016   $ 113     $ 46     $ 592     $     $ 751  

 

5. OTHER (INCOME)/EXPENSE

 

Other (income) expense in the consolidated statements of operations during the year ended December 31, 2016 and 2015 are as follows:

 

    Year Ended December 31,  
    2016     2015  
Payroll tax interest and penalties (abated 2016) accrued 2015     (1,050 )     1,546  
Acquisition transaction and other expenses     735       1,139  
Impairment of intangible assets     110        
(Gain) on cancellation of Titan notes payable           (150 )
Other (income)/expense   $ (205 )   $ 2,535  

 

During 2015, the Company recognized a charge of approximately $1.5 million representing estimated accrued interest and potential penalties for failure to timely file employer’s federal payroll tax returns and make the required payments thereon for all payroll periods beginning on and after January 1, 2014. Immediately upon discovery of the delinquency in October 2015, the Company contacted the Internal Revenue Service (“IRS”) which confirmed that no delinquency notices had been sent, nor were there any collection proceedings underway. In November 2015, the Company filed all past due payroll tax returns with the IRS and became timely in the remittance of its current period payroll tax obligations.

 

During the fourth quarter of 2016, the Company received notice from the Internal Revenue Service (“IRS”) that the penalties for failure to timely file employer’s federal payroll tax returns and make the required payments thereon had been abated for Pioneer Power Solutions, Inc., Jefferson Electric Inc. and Pioneer Custom Electrical Products Corp. The abatement of these penalties amounts to approximately $1.1 million and has been recognized in the Company’s other expense in its consolidated statements of operations.

 

50

 

 

6. INVENTORIES

 

The components of inventories are summarized below:

 

    December 31,
    2016   2015
Raw materials   $ 10,175     $ 7,115  
Work in process     6,535       3,918  
Finished goods     9,826       7,134  
Provision for excess and obsolete inventory     (389 )     (504 )
Total inventories   $ 26,147     $ 17,663  

  

Included in raw materials and finished goods are goods in transit of approximately $3.1 million in 2016 and $2.1 million in 2015. Additionally, $0.6 million of inventory in 2016 and $0.8 of inventory in 2015 was written off due to restructuring.

 

At December 31, 2016, $4.0 million of raw materials not pledged to our secured creditor were used as collateral to secure short term borrowings under a product financing arrangement, while none of the raw materials was pledged as of December 31, 2015.

 

7. PROPERTY, PLANT AND EQUIPMENT

 

Property, plant and equipment are summarized below:

 

    December 31,  
    2016     2015  
Land   $ 46     $ 45  
Buildings     2,293       2,224  
Machinery and equipment     9,421       9,143  
Furniture and fixtures     466       416  
Computer hardware and software     1,289       1,334  
Leasehold improvements     534       271  
Construction in progress     18       375  
      14,067       13,808  
Less: Accumulated depreciation     (7,476 )     (6,459 )
Total property, plant and equipment, net   $ 6,591     $ 7,349  

 

 Depreciation expense was $1.3 million in 2016 and 2015.

 

Additionally, in 2015, $2.4 million of property, plant and equipment was written off due to restructuring.

 

8. OTHER ASSETS

 

In December 2011 and January 2012, the Company made two loans, each in the amount of $300 to a developer of a renewable energy project in the U.S. The promissory notes accrue interest at a rate of 4.5% per annum with a final payment of all unpaid principal and interest becoming fully due and payable upon the earlier to occur of (i) the four year anniversary of the issuance date of the promissory notes, or (ii) an event of default. As defined in the promissory notes, an event of default includes, but is not limited to, the following: any bankruptcy, reorganization or similar proceeding involving the borrower, a sale or transfer of substantially all the assets of the borrower, a default by the borrower relating to any indebtedness due to third parties, the incurrence of additional indebtedness by the borrower without the Company’s written consent and failure of the borrower to perform its obligations pursuant to its other agreements with the Company, including its purchase order for pad mount transformers.  The full loan receivable is outstanding at December 31, 2016 and 2015. The Company is actively evaluating its alternatives to either foreclose on its security interests underlying the loans, or otherwise renegotiate and extend them. As the Company does not currently expect repayment of the loans receivable within the next twelve months, they have been classified as long-term in the Company’s Consolidated Balance Sheets.

 

Also included in Other Assets at December 31, 2016 and 2015 is a customer note receivable of $0.2 million.

 

51

 

 

9. GOODWILL AND OTHER INTANGIBLE ASSETS

 

Goodwill is tested at the reporting unit level annually and if necessary, whenever events or changes in circumstances indicate that the carrying amount may not be recoverable. In 2015, the Company changed its annual testing date from December 31 to October 1. The Company believes this change in the method of applying an accounting principle is preferable, as it will alleviate the resource constraints that historically existed during the fourth quarter. This change in annual testing date does not delay, accelerate, or avoid an impairment charge.

 

We test goodwill for impairment using a quantitative analysis consisting of a two-step approach. The first step of our quantitative analysis consists of a comparison of the carrying value of our reporting units, including goodwill, to the estimated fair value of our reporting units using a discounted cash flow methodology. If step one results in the carrying value of the reporting unit exceeding the fair value of such reporting unit, we would then proceed to step two which would require us to calculate the amount of impairment loss, if any, that we would record for such reporting unit. 

 

In 2016, Jefferson recorded an impairment of $110 for its technology-related industry accreditation that was no longer in use during the year.

 

In 2015, due to relocation of Bemag, the company recorded an impairment charge of $404, consisting of $261 and $143 for customer relationship and technology-related industry accreditations, respectively. During the planning of the relocation of the Bemag production to Reynosa, the following was determined: 1- the product offering would be built to the specifications of the Jefferson technology-related industry accreditations, rendering Bemag’s accreditations impaired; and 2 – the move to Reynosa would have an adverse impact on the customers being serviced by Bemag, due to the increase in shipping time from Reynosa versus the shipping time from Farnham, QC. This increase in shipping time would cause customers to order from competitors. Thus, the customer relationships were viewed as impaired and written off.

  

Changes in the carrying amount of goodwill by reportable segment during the years ended December 31, 2016 and 2015 are as follows:

 

    T&D     Critical Power        
    Solutions     Solutions     Total  
    Segment     Segment     Goodwill  
Gross Goodwill:                        
Balance as of January 1, 2015   $ 7,703     $ 2,879     $ 10,582  
Additions due to acquisitions     371             371  
Adjustments           91       91  
Balance as of December 31, 2015   $ 8,074     $ 2,970     $ 11,044  
Accumulated impairment losses:                        
Balance as of January 1, 2015   $ (976 )   $     $ (976 )
No activity                  
Balance as of December 31, 2015   $ (976 )   $     $ (976 )
                         
Net Goodwill   $ 7,098     $ 2,970     $ 10,068  
                         
Gross Goodwill:                        
Balance as of January 1, 2016   $ 8,074     $ 2,970     $ 11,044  
Adjustments     (96 )           (96 )
Balance as of December 31, 2016   $ 7,978     $ 2,970     $ 10,948  
Accumulated impairment losses:                        
Balance as of January 1, 2016   $ (976 )   $     $ (976 )
No activity                  
Balance as of December 31, 2016   $ (976 )   $     $ (976 )
                         
Net Goodwill   $ 7,002     $ 2,970     $ 9,972  

 

52

 

 

As mentioned in Note 1, goodwill of $0.7 million was transferred from Critical Power to T&D Solutions segment due to restructuring.

  

Changes in intangible asset balances for the years ended December 31, 2016 and 2015 consisted of the following:

 

    T&D     Critical Power     Total  
    Solutions     Solutions     Intangible  
    Segment     Segment     Assets  
Balance as of January 1, 2015   $ 4,644     $ 5,147     $ 9,791  
Additions due to acquisition     2,386             2,386  
Amortization     (515 )     (1,304 )     (1,819 )
Impairment charges     (404 )           (404 )
Foreign currency translation     2             2  
Balance as of December 31, 2015   $ 6,113     $ 3,843     $ 9,956  
Adjustments     62             62  
Amortization     (506 )     (1,240 )     (1,746 )
Impairment charges     (110 )           (110 )
Foreign currency translation     6             6  
Balance as of December 31, 2016   $ 5,565     $ 2,603     $ 8,168  

 

The components of intangible assets at December 31, 2016 are summarized below:

 

    Weighted Average Amortization Years     Gross Carrying Amount     Accumulated Amortization     Impairment Charges     Foreign Currency Translation     Net Book Value  
Customer relationships     7     $ 7,203     $ (3,564 )   $     $     $ 3,639  
Non-compete agreements     6       720       (392 )           (6 )     322  
Trademarks     (a)       2,139       (251 )           (73 )     1,815  
Distributor territory license     4       474       (237 )                 237  
Internally developed software     7       289       (83 )                 206  
Developed technology     10       493       (99 )                 394  
Technology-related industry accreditations     Indefinite       1,686             (110 )     (21 )     1,555  
Total intangible assets           $ 13,004     $ (4,626 )   $ (110 )   $ (100 )   $ 8,168  

 

(a) Includes $1.8 million of trademarks with an indefinite useful life.

 

Future scheduled annual straight-line amortization expense over the useful lives of finite life intangible assets is as follows:

 

Years Ending December 31,     Total  
2017     $ 1,655  
2018       1,578  
2019       291  
2020       266  
2021       265  
Thereafter       743  
      $ 4,798  

 

10. DEBT

 

Canadian Credit Facilities

 

Our Canadian subsidiaries have maintained credit facilities with BMO since October 2009. In June 2011, our wholly owned subsidiary Pioneer Electrogroup Canada Inc. entered into a letter loan agreement with BMO (the “Initial Canadian Facilities”) that replaced and superseded all of our businesses’ prior financing arrangements with the bank. 

 

Our Initial Canadian Facilities originally provided for up to $22.0 million Canadian dollars (“CAD”) (approximately $15.9 million expressed in U.S. dollars) consisting of a $10.0 million CAD demand revolving credit facility (“Facility A”) to finance ongoing operations, a $2.0 million CAD term credit facility (“Facility B”) that financed a plant expansion, and a $10.0 million CAD term credit facility (“Facility C”) that financed a business acquisition and the purchase and expansion of its manufacturing facilities.

 

53

 

 

 

The Initial Canadian Facilities required us to comply on a consolidated Canadian basis with various financial covenants, including maintaining a minimum fixed charge coverage ratio, a maximum funded debt to EBITDA ratio and a limitation on funded debt as a percent of capitalization.

 

Facility A was originally subject to margin criteria and borrowings bear interest at BMO’s prime rate plus 0.50% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 0.50% per annum or LIBOR plus 2.00% per annum on amounts borrowed in U.S. dollars.

 

Borrowings under Facility B originally bore interest at BMO’s prime rate plus 1.00% per annum with principal repayments becoming due on a five year amortization schedule.

 

Borrowings under Facility C were repayable according to a five year principal amortization schedule and bore interest at the following rates: if the funded debt to EBITDA ratio is equal to or greater than 2.00, BMO’s prime rate plus 1.25% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 1.25% per annum or LIBOR plus 2.50% per annum on amounts borrowed in U.S. dollars; or, if the funded debt to EBITDA ratio is less than 2.00, BMO ’s prime rate plus 1.00% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 1.00% per annum or LIBOR plus 2.25% per annum on amounts borrowed in U.S. dollars. In addition, Facility C was subject to a standby fee which is calculated monthly using the unused portion of the facility at either 0.625% per annum if the funded debt to EBITDA ratio is equal to or greater than 2.00 or 0.5625% per annum if the funded debt to EBITDA ratio is less than 2.00. 

 

In the third quarter of 2015, in connection with an amendment to our United States credit facilities, we elected to prepay $5.0 million Canadian dollars (approximately $4.0 million expressed in U.S. dollars) of Facility C with cash available on hand.

 

In April 2016, our wholly owned subsidiary, Pioneer Electrogroup Canada Inc. (“PECI”), entered into an Amended and Restated Credit Agreement (“CAD ARCA”) with BMO with respect to our existing Canadian credit facilities (as amended and restated, the “Canadian Facilities”) that replaced and superseded all of our businesses’ prior financing arrangements with the bank. This CAD ARCA extended the maturity date of our Canadian Facilities to July 31, 2017. Additionally, defaults relating to the breach of certain financial covenants under the prior financing arrangements with the bank existing as of December 31, 2015 were waived by BMO. On March 15, 2017, the CAD ARCA was further amended (the “2017 CAD ARCA Amendment”).

 

Our Canadian Facilities provided for up to $8.1 million CAD (approximately $6.3 million expressed in U.S. dollars) consisting of a revolving $7.0 million CAD Facility A to finance ongoing operations, a $0.5 million CAD Facility B that financed a plant expansion, and a $0.7 million USD Facility that financed a business acquisition and the purchase and expansion of its manufacturing facilities. The 2017 CAD ARCA Amendment increased the Facility A to $8.0 million CAD, increasing the total amount of loans available under the Canadian Facilities to $9.1 million CAD.

 

Facility A, as amended and restated, is subject to margin criteria and borrowings bear interest at BMO’s prime rate plus 0.75% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 0.75% per annum or LIBOR plus 2.25% per annum on amounts borrowed in U.S. dollars. Pursuant to the 2017 CAD ARCA Amendment, Facility A will mature on July 31, 2018.

 

Borrowings under Facility B, as amended and restated, bear interest at BMO’s prime rate plus 1.25% per annum with principal repayments becoming due on a five year amortization schedule. Pursuant to the CAD ARCA, quarterly principal repayments were reduced to $47 CAD, with a balloon payment of $141 CAD due on July 31, 2017. The 2017 CAD ARCA Amendment amended the payment schedules so that the quarterly principal payments of $47 CAD will continue after July 31, 2017 until our borrowings under the facility is fully paid on April 30, 2018.

 

Borrowings under Facility C, as amended and restated, bear interest at BMO’s prime rate plus 1.50% per annum on amounts borrowed in Canadian dollars, or its U.S. base rate plus 1.50% per annum or LIBOR plus 2.75% per annum on amounts borrowed in U.S. dollars. Pursuant to the CAD ARCA, a principal repayment of $72 USD was due on June 30, 2016, and the reduced quarterly principal repayments of $36 USD was to be made beginning on October 31, 2016, with a balloon payment of $496 USD due on July 31, 2017. The 2017 CAD ARCA Amendment amended the payment schedules so that the quarterly payments of $36 USD will continue until July 31, 2018, with a balloon payment of $352 due on July 31, 2018.

 

The CAD ARCA modified financial covenant testing so that testing will be performed on our consolidated financial statements. The financial covenants were changed pursuant to the CAD 2017 Amendment to require certain minimum working capital ratios, minimum EBITDA levels and effective tangible net worth levels for each fiscal quarter, which were further modified by the 2017 CAD ARCA Amendment. We are in compliance with most of the financial covenant testing and, on March 6, 2017, we received a waiver from BMO on certain financial covenants existing as of December 31, 2016.

  

As of December 31, 2016, we had approximately $5.2 million in U.S. dollar equivalents outstanding under our Canadian Credit Facilities. Our borrowings consisted of approximately $4.4 million outstanding under Facility A, $0.2 million outstanding under Facility B and $0.6 million outstanding under Facility C.

 

As of December 31, 2015, we had approximately $1.7 million in U.S. dollar equivalents outstanding under our Initial Canadian Facilities. Our borrowings consisted of approximately $0.5 million outstanding under Facility A, $0.4 million outstanding under Facility B and $0.8 million outstanding under Facility C. 

 

 

54

 

 

United States Credit Facilities

 

On December 2, 2014, our existing U.S. credit facilities (the “U.S. Facilities”) were amended in order to provide a $5.0 million term loan facility that was used for the acquisition of Titan. The term loan facility had principal repayments becoming due on a five year amortization schedule.

 

The U.S. Facilities initially required us to comply with a two-step test of financial covenants. First, as measured on a consolidated basis, we were required to comply with a maximum funded debt to adjusted EBITDA ratio of (a) 3.15x for the quarter ended December 31, 2014 and the quarter ending March 31, 2015, (b) 3.25x for the quarter ending June 30, 2015, (c) 3.65x for the quarter ending September 30, 2015, and (d) 2.75x for the quarter ending December 31, 2015 and all testing periods thereafter. Secondly, if the funded debt to adjusted EBITDA tests above are met, and our fixed charge coverage ratio is at or above 1.10x for the quarter ended December 31, 2014, and at or above 1.25x for all testing periods thereafter, then no further compliance tests were required.

 

Alternatively, we could comply with the financial covenant requirements of the U.S. Facilities if our U.S. operations maintained a maximum funded debt to capitalization ratio and various minimum fixed charge coverage ratios and maximum funded debt to adjusted EBITDA ratios which were set at different thresholds by time period.

 

Borrowings under the demand revolving credit facility (USD Facility A) bore interest, at our option, at the bank’s prime rate plus 1.00% per annum on U.S. prime rate loans, or an adjusted LIBOR rate plus 2.25% per annum on Eurodollar loans. Borrowings under the term loan facility (USD Facility B) bore interest, at our option, at the bank’s prime rate plus 1.25% per annum on U.S. prime rate loans, or an adjusted LIBOR rate plus 2.50% per annum on Eurodollar loans.

  

In April 2016, we entered into an Amended and Restated Credit Agreement (“US ARCA”) with BMO with respect to our U.S. Facilities that replaced and superseded all of our businesses’ prior financing arrangements with the bank. Additionally, defaults relating to the breach of certain financial covenants under the prior financing arrangements with the bank existing as of December 31, 2015 were waived by BMO. On March 15, 2017, the US ARCA was further amended (the “2017 US ARCA Amendment”).

 

Our U.S. Facilities, as amended and restated, provided for up to $19.1 million USD consisting of a $14.0 million USD Facility A to finance ongoing operations, a $5.0 million USD Facility B that financed the acquisition of Titan, and a new $0.1 million revolving credit facility provided pursuant to a MasterCard is to be used to pay for and temporarily finance our day-to-day business expenses and for no other purpose. The 2017 US ARCA Amendment increased the USD Facility A to $15.0 million, increasing the total amount of loans available under the U.S. Facilities to $20.1 million USD.

 

USD Facility A continues to bear interest, at our option, at the bank’s prime rate plus 1.00% per annum on U.S. prime rate loans, or an adjusted LIBOR rate plus 2.25% per annum on Eurodollar loans. USD Facility A had a maturity date of July 31, 2017, which was extended to July 31, 2018 pursuant to the 2017 US ARCA Amendment

 

Borrowings under USD Facility B bear interest, at our option, at U.S. base rate plus 1.25% per annum on U.S. prime loans, or an adjusted LIBOR rate plus 2.50% per annum on Eurodollar loans. Pursuant to the US ARCA, our quarterly principal payments were reduced to $31 USD for calendar year 2016, with the original amortization schedule continuing to apply to all quarterly principal payments made after December 31, 2016, and the final maturity date of December 2, 2019. The 2017 US ARCA Amendment reduced the scheduled quarterly principal payments to $31 USD, commencing March 31, 2017, to continue until July 31, 2018, with a balloon payment of $4,438 on July 31, 2018.

 

The US ARCA modified financial covenant testing so that testing will be performed on our consolidated financial statements. The financial covenants were changed pursuant to the US ARCA to require certain minimum working capital ratios, minimum EBITDA levels and effective tangible net worth levels for each fiscal quarter, which were further modified by the 2017 US ARCA Amendment. We are in compliance with most of the financial covenant testing and on March 6, 2017, we received a waiver from BMO on certain financial covenants existing as of December 31, 2016.

 

Our obligations under the U.S. Facilities are guaranteed by all our wholly-owned U.S. subsidiaries. In addition, we and our wholly-owned U.S. subsidiaries granted a security interest in substantially all of our assets, including 65% of the shares of Pioneer Electrogroup Canada Inc. held by us, to secure our obligations for borrowed money under the U.S. Facilities. The U.S. Facilities also restrict our ability to incur indebtedness, create or incur liens, make investments, make distributions or dividends and enter into merger agreements or agreements for the sale of any or all our assets.

 

As of December 31, 2016, we had approximately $17.9 million outstanding under our U.S. Credit Facilities. Our borrowings consisted of approximately $13.3 million outstanding under USD Facility A, and $4.6 million outstanding under USD Facility B.

 

As of December 31, 2015, we had approximately $14.1 million outstanding under our U.S. Credit Facilities. Our borrowings consisted of approximately $9.4 million outstanding under USD Facility A, and $4.7 million outstanding under USD Facility B.

 

55

 

 

Nexus Promissory Note

 

On July 25, 2012, the Company’s Mexican subsidiary, Nexus Magneticos de Mexico, S. de R.L. de C.V. (“Nexus”), entered into a $1.65 million term loan agreement with GE CF Mexico, S.A. de C.V. (“GE Capital Mexico”). The term loan is payable in 60 consecutive monthly installments and bears interest, payable monthly, at a rate of 6.93% per annum. The obligations of Nexus under the term loan are secured by certain machinery and equipment located in Mexico and by a corporate guaranty by the Company. As of December 31, 2016 and 2015, there was approximately $0.2 million and $0.3 million outstanding, respectively, under the Nexus Promissory Note. 

 

Long-term debt consists of the following:

             
    December 31,  
    2016     2015  
Term credit facilities, net (a)   $ 5,194     $ 5,714  
Nexus promissory note     185       481  
Capital lease obligations     5       7  
Total debt     5,384       6,202  
Less current portion     (1,379 )     (6,037 )
Total long-term debt   $ 4,005     $ 165  

 

(a) The balances as of December 31, 2016 and 2015 are net of debt issuance costs of $245 and $229, respectively.

 

Excluding debt issuance costs of $245, the annual maturities of long-term debt at December 31, 2016, were as follows:

         
      Long-term  
Years Ending December 31,     debt maturities  
2017     $ 1,504  
2018       600  
2019       3,525  
2020        
Thereafter        
Total long-term debt maturities     $ 5,629  
             

 

11. COMMITMENTS AND CONTINGENCIES

 

Leases

 

The Company leases certain offices, facilities and equipment under operating leases expiring at various dates through 2026.  At December 31, 2016, the minimum annual lease commitments under the leases having terms in excess of one year were as follows:

 

      Operating  
Years Ending December 31,     Leases  
2017     $ 1,015  
2018       957  
2019       718  
2020       662  
2021       397  
Thereafter       1,508  
Total lease commitments     $ 5,257  
             

Rent and lease expense was approximately $1.5 million for 2016 and 2015.

 

   56  
 

 

Litigation and Claims

 

The Company is from time to time party to various lawsuits, claims and other proceedings that arise in the ordinary course of our business.  

 

On January 11, 2016, Myers Power Products, Inc., a specialty electrical products manufacturer, filed suit with the Superior Court of the State of California, County of Los Angeles, against us, PCEP and two PCEP’s employees who are former employees of Myers Power Products, Inc., Geo Murickan, the president of PCEP (“Murickan”), and Brett DeChellis (“DeChellis”), alleging, among other things, that Murickan wrongly used and retained confidential business information of Myers Power Products, Inc. for the benefit of us and PCEP, in breach of their confidentiality agreement and/or employment agreement entered into with Myers Power Products, Inc., and that we and PCEP knowingly received and used such confidential business information. Myers Power Products, Inc. is seeking injunctive relief enjoining us, PCEP and our employees from using its confidential business information and compensatory damages of an unspecified unlimited (exceeding $25,000) amount. On March 18, 2016, we filed an answer to the complaint, denying generally each and every allegation and relief sought by Myers Power Products, Inc. and seeking dismissal based on, among other things, failure to state facts sufficient to constitute a cause of action. We intend to contest the matter vigorously. Due to the uncertainties of litigation, however, we can give no assurance that we, PCEP and our employees will prevail on any claims made against us, PCEP and our employees in any such lawsuit. Also, we can give no assurance that any other lawsuits or claims brought in the future will not have an adverse effect on our financial condition, liquidity or operating results. 

 

With respect to this and all such lawsuits, claims and proceedings, the Company records a reserve when it is probable that a liability has been incurred and the amount of loss can be reasonably estimated.  The Company does not believe that the resolution of any currently pending lawsuits, claims and proceedings, either individually or in the aggregate, will have a material adverse effect on its financial position, results of operations or liquidity.  However, the outcomes of any currently pending lawsuits, claims and proceedings cannot be predicted, and therefore, there can be no assurance that this will be the case.

 

12. STOCKHOLDERS’ EQUITY

 

Common Stock

 

The Company had 8,699,712 shares of common stock, $0.001 par value per share, outstanding as of December 31, 2016 and 2015.

 

In September 2015, the Company completed a public offering and issued 1,125,000 shares of its common stock at a gross sales price of $4.00 per share, resulting in $3.9 million in net proceeds after deducting the underwriting discount and costs directly attributable to the offering. Subsequent to the end of the third quarter, on October 5, 2015, the underwriters exercised their over-allotment option to purchase an additional 168,750 shares from the Company at the public offering price of $4.00 per share, resulting in an additional $0.6 million in net proceeds after deducting the underwriting discount.

 

Warrants

 

The Company had warrants outstanding to purchase 50,600 shares of common stock, with a weighted average exercise price of $7.00 per share, as of December 31, 2016 and 2015. The warrants expire on September 18, 2018.  No warrants were exercised during the years ended December 31, 2016 and 2015.

 

Preferred Stock

 

The board of directors is authorized, subject to any limitations prescribed by law, without further vote or action by the shareholders, to issue from time to time up to 5,000,000 shares of preferred stock, $0.001 par value, in one or more series. Each such series of preferred stock shall have such number of shares, designations, preferences, voting powers, qualifications, and special or relative rights or privileges as shall be determined by the board of directors, which may include, among others, dividend rights, voting rights, liquidation preferences, conversion rights and preemptive rights.

 

Foreign Currency Translation

 

Foreign assets and liabilities are translated using the exchange rate in effect at the balance sheet date, and results of operations are translated using an average rate for the period. Translation adjustments are accumulated and reported as a component of accumulated other comprehensive income (loss). The Company had foreign currency translation adjustments resulting in an unrealized loss of $37 for the year ended December 31, 2016, as compared to an unrealized loss of $2.5 million for the year ended December 31, 2015.

 

   57  
 

 

13. STOCK-BASED COMPENSATION

 

On December 2, 2009, the Company adopted the 2009 Equity Incentive Plan (the “2009 Plan”) for the purpose of issuing incentive stock options intended to qualify under Section 422 of the Internal Revenue Code of 1986, as amended, non-qualified stock options, restricted stock, stock appreciation rights, performance unit awards and stock bonus awards to employees, directors, consultants and other service providers. A total of 320,000 shares of common stock are reserved for issuance under the 2009 Plan. Options may be granted under the 2009 Plan on terms and at prices as determined by the board of directors or by the plan administrators appointed by the board of directors.

 

On May 11, 2011, the board of directors of the Company adopted the Pioneer Power Solutions, Inc. 2011 Long-Term Incentive Plan (the “2011 Plan”) which was subsequently approved by stockholders of the Company on May 31, 2011. The 2011 Plan replaces and supersedes the 2009 Plan. The Company’s outside directors and employees, including the Company’s principal executive officer, principal financial officer and other named executive officers, and certain contractors are all eligible to participate in the 2011 Plan. The 2011 Plan allows for the granting of incentive stock options, nonqualified stock options, stock appreciation rights, restricted stock, restricted stock units, performance awards, dividend equivalent rights, and other awards, which may be granted singly, in combination, or in tandem, and upon such terms as are determined by the Board or a committee of the Board that is designated to administer the Plan. Subject to certain adjustments, the maximum number of shares of the Company’s common stock that may be delivered pursuant to awards under the 2011 Plan is 700,000 shares. As of December 31, 2016, 247,400 stock options had been granted, consisting of 79,600 incentive stock options and 167,800 non-qualified stock options.

 

Expense for stock-based compensation recorded for the years ended December 31, 2016 and 2015 was approximately $0.1 and $0.2 million, respectively. All of the stock-based compensation expense is included in selling, general and administrative expenses in the accompanying consolidated statements of operations. As of December 31, 2016, the Company had total stock-based compensation expense remaining to be recognized of approximately $44.

 

The fair value of the stock options granted was measured using the Black-Scholes valuation model with the following assumptions:

 

    Year Ended December 31,  
    2016     2015  
Expected volatility     34 - 35 %     34 - 37 %
Expected life in years     5.5 - 6.0       5.5 - 6.0  
Risk-free interest rate     1.57 - 1.66 %     1.52 - 1.62 %
Dividend yield     0 %     0 %

 

A summary of stock option activity for the years ended December 31, 2016 and 2015, and changes during the years then ended is presented below:

 

      Stock
Options
    Weighted average
exercise price
    Weighted
average remaining
contractual term
    Aggregate
intrinsic value
 
Outstanding as of January 1, 2015       366,400     $ 9.92       6.9     $ 62,160  
Granted       13,000       8.98       9.3        
Exercised                          
Forfeited       (34,667 )     15.21       7.9        
Outstanding as of December 31, 2015       344,733     $ 9.35       6.5     $ 62,160  
Granted       27,000       3.68       9.2       61,290  
Exercised                          
Forfeited       (124,333 )     9.31       5.9        
Outstanding as of December 31, 2016       247,400     $ 8.75       5.9     $ 123,450  
                                   
Exercisable as of December 31, 2016       197,733     $ 9.3       5.3     $ 62,160  
                                     

 

The total number of shares reserved for the plan is 700,000 leaving a balance of 452,600 available for future grants.

 

   58  
 

 

Intrinsic value is the difference between the market value of the stock at December 31, 2016 and the exercise price which is aggregated for all options outstanding and exercisable. A summary of the weighted-average grant-date fair value of options, total intrinsic value of options exercised, and cash receipts from options exercised is shown below:

 

    Year Ended December 31,  
    2016     2015  
Weighted-average fair value of options granted (per share)   $ 1.33     $ 3.20  
Intrinsic value gain of options exercised            
Cash receipts from exercise of options            

 

14. INCOME TAXES

 

The components of income (loss) before taxes are summarized below:

 

  Year Ended Decmber 31,
  2016   2015
Earnings before income taxes          
U.S. operations $            (2,574)   $            (7,563)
Foreign operations                2,398                (1,020)
Income (loss) before income taxes $               (176)   $            (8,583)

   

The components of the income tax provision (benefit) were as follows:

 

    Year Ended December 31,
    2016   2015
Current        
Federal   $ —       $ —    
State     119       6  
Foreign     1,184       —    
Deferred     (416 )     (2,708 )
Total income tax provision   $ 887     $ (2,702 )

 

A reconciliation from the statutory U.S. income tax rate and the Company’s effective income tax rate, as computed on income (loss) before taxes, is as follows:

 

    Year Ended Decmber 31,
    2016   2015
Federal income tax at statutory rate   $ (61 )   $ (3,004 )
State and local income tax, net     12       (343 )
Foreign rate differential     199       645  
Other permanent items     (319 )     —    
Foreign tax credit     38       —    
True-up and other     1,018       —    
Total   $ 887     $ (2,702 )

  

The Company’s provision for income taxes reflects an effective tax rate on income (loss) before income taxes of 504% in 2016, as compared to 31% in 2015.  The increase in the Company’s effective tax rate during 2016 primarily reflects the correction of a prior year error in the current year, and the recognition of prior period adjustments resulting from an audit of our tax returns in Canada, as well as the permanent benefit resulting from the abatement of payroll tax penalties.

  

   59  
 

 

Provision has not been made for U.S. or additional foreign taxes on undistributed income of the Canadian foreign subsidiary, which have been, and will continue to be reinvested with the exception of certain deemed dividends.  This income could become subject to additional tax if they were remitted as dividends, if foreign income were loaned to us or a U.S. affiliate, or if we should sell, transfer or dispose of our stock in the foreign subsidiaries.  However, due to the availability of foreign tax credits, we do not believe there would be any material deferred tax liability as a result of the company’s un-repatriated foreign earnings.  As of December 31, 2016, the cumulative amount of undistributed income was approximately $17.9 million.

 

The net deferred income tax asset (liability) was comprised of the following:

 

    December 31,
    2016   2015
Noncurrent deferred income taxes        
Total assets   $ 5,659     $ 3,642  
Total liabilities     (2,400 )     (781 )
Net noncurrent deferred income tax asset (liability)     3,259       2,861  
Net deferred income tax asset (liability)   $ 3,259     $ 2,861  

  

The tax effect of temporary differences between GAAP accounting and federal income tax accounting creating deferred income tax assets and liabilities were as follows:

 

    December 31,
    2016   2015
Deferred tax assets        
Canada net operating loss carryforward   $ —       $ 37  
U.S. net operating loss carryforward     —         1,361  
Non-deductible reserves     1,122       711  
Pension plan     47       —    
Foreign tax credits     3,463       1,111  
Fixed assets     116       —    
Intangibles     920       737  
Other     (9 )     368  
Valuation allowance     —         (431 )
Net deferred tax assets     5,659       3,894  
Deferred tax                
Fixed assets     (1,065 )     (1,033 )
Intangibles     (1,335 )     —    
Net deferred tax liabilities     (2,400 )     (1,033 )
Deferred asset (liability), net   $ 3,259     $ 2,861  

  

The assessment of the amount of value assigned to our deferred tax assets under the applicable accounting rules is judgmental.  We are required to consider all available positive and negative evidence in evaluating the likelihood that we will be able to realize the benefit of our deferred tax assets in the future.  Such evidence includes scheduled reversals of deferred tax liabilities, projected future taxable income, tax planning strategies and the results of recent operations.  Since this evaluation requires consideration of events that may occur some years into the future, there is an element of judgment involved.  Realization of our deferred tax assets is dependent on generating sufficient taxable income in future periods.  We believe that it is more likely than not that future taxable income will be sufficient to allow us to recover substantially all of the value assigned to our deferred tax assets.  However, if future events cause us to conclude that it is not more likely than not that we will be able to recover all of the value assigned to our deferred tax assets, we will be required to adjust our valuation allowance accordingly.

 

As of December 31, 2016, the Company does not have net operating loss carry-forwards available in the United States or Canada. The Company has approximately $3.5 million of foreign tax credits which expire in 2018 and $39 of research and development credits which expire in 2032.

  

   60  
 

 

A reconciliation of the beginning and ending amount of gross unrecognized tax benefits, exclusive of interest and penalties, is as follows:

 

    Uncertain Tax Position
Balance as of January 1, 2015   $ 317  
No activity     —    
Balance as of December 31, 2015   $ 317  
Decreases related to tax return becoming statuted barred during the year     (113 )
Balance as of December 31, 2016   $ 204  

  

The Company’s policy is to recognize interest and penalties related to income tax matters as interest expense. Interest and penalties as they relate to the payroll tax issue are recorded as Other Expense.

 

Management believes that an adequate provision has been made for any adjustments that may result from tax examinations. However, the outcome of tax audits cannot be predicted with certainty. If any issues addressed in the Company’s tax audits are resolved in a manner not consistent with management’s expectations, the Company could be required to adjust its provision for income taxes in the period such resolution occurs. Although timing of the resolution and/or closure of audits is highly uncertain, the Company does not believe it is reasonably possible that its unrecognized tax benefits would materially change in the next twelve months.

 

The tax years subject to examination by major tax jurisdiction include the years 2011 and forward by the U.S. Internal Revenue Service and most state jurisdictions, and the years 2010 and, generally, 2012 and forward, for the Canadian jurisdiction. 

 

15. PENSION PLAN

 

A Canadian subsidiary of the Company sponsors a defined benefit pension plan in which a majority of its employees are members. The employer contributes 100% to the plan. The benefits, or the rate per year of credit service, are established by the Company’s subsidiary and updated at its discretion.

 

Cost of Benefits

 

The components of the expense the Company incurred under the pension plan are as follows:

       
    Year Ended December 31,  
    2016     2015  
Current service cost, net of employee contributions   $ 46     $ 50  
Interest cost on accrued benefit obligation     102       103  
Expected return on plan assets     (163 )     (160 )
Amortization of transitional obligation     10       10  
Amortization of past service costs     7       7  
Amortization of net actuarial gain     37       44  
Total cost of benefit   $ 39     $ 54  

 

Benefit Obligation

 

The Company’s obligation for the pension plan is valued annually as of the beginning of each fiscal year. The projected benefit obligation represents the present value of benefits ultimately payable to plan participants for both past and future services expected to be provided by the plan participants.

 

   61  
 

 

The Company’s obligations pursuant to the pension plan are as follows: 

             
    December 31,  
    2016     2015  
Projected benefit obligation, at beginning of year   $ 2,578     $ 3,057  
Current service cost, net of employee contributions     46       50  
Employee contributions     30       30  
Interest cost     102       103  
Actuarial loss (gain)     15       (66 )
Impact of change in discount rate     39       (37 )
Benefits paid     (167 )     (160 )
Foreign exchange adjustment     (15 )     (399 )
Projected benefit obligation, at end of year   $ 2,628     $ 2,578  

 

A summary of expected benefit payments related to the pension plan is as follows:

         
Years Ending December 31,     Pension Plan  
2017     $ 159  
2018       158  
2019       154  
2020       151  
2021       147  
2022-2026       689  
             

 Other changes in plan assets and benefit obligations recognized in other comprehensive income / (loss) are as follows:

 

    Year Ended December 31,  
    2016     2015  
Net (loss) / gain   $ (220 )   $ 108  
Amortization of prior service cost     7       7  
Amortization of gain     37       44  
Amortization of transitional asset     10       11  
      (166 )     170  
Taxes     (9 )     46  
Total recognized in other comprehensive (loss) / income, net of taxes   $ (157 )   $ 124  

 

The estimated net loss amortized from accumulated other comprehensive income / (loss) into net periodic benefit cost over the next year amounts to approximately $37. The estimated prior service cost amortized from accumulated other comprehensive income into net periodic benefit cost over the next year amounts to approximately $7. The estimated transitional asset amortized from accumulated other comprehensive income into net periodic benefit cost over the next year amounts to approximately $10.

 

The accumulated other comprehensive income / (loss) consists of the following amounts that have not yet been recognized as components of net benefit cost:

 

    December 31,  
    2016     2015  
Unrecognized prior service cost   $ 96     $ 96  
Unrecognized net actuarial loss     1,348       48  
Unrecognized transitional obligation     58       1,191  
Deferred income taxes     (404 )     (394 )
Total   $ 1,098     $ 941  

 

   62  
 

 

Plan Assets

 

Assets held by the pension plan are invested in accordance with the provisions of the Company’s approved investment policy. The pension plan’s strategic asset allocation was structured to reduce volatility through diversification and enhance return to approximate the amounts and timing of the expected benefit payments. The asset allocation for the pension plan at the end of 2016 and 2015 and the target allocation for 2017, by asset category, is as follows:

 

                   
    December 31,     2017 Target  
    2016     2015     Allocation  
Equity securities     37 %     43 %     37 %
Fixed income securities     53       47       53  
Real estate     8       8       8  
Other     2       2       2  
Total     100 %     100 %     100 %

 

The fair market values, by asset category are as follows:

 

    Fair Value Measurements  
    at December 31,  
    2016     2015  
Equity securities   $ 909     $ 1,082  
Fixed income securities     1,302       1,182  
Real estate     196       201  
Other     49       50  
Total   $ 2,456     $ 2,515  

 

Changes in the assets held by the pension plan in the years 2016 and 2015 are as follows: 

             
    December 31,  
    2016     2015  
Fair value of plan assets, at beginning of year   $ 2,515     $ 2,706  
Actual return on plan assets     (3 )     164  
Employer contributions     96       135  
Employee contributions     30       30  
Benefits paid     (167 )     (160 )
Foreign exchange adjustment     (15 )     (360 )
Fair value of plan assets, at end of year   $ 2,456     $ 2,515  

 

Contributions

 

The Company’s policy is to fund the pension plan at or above the minimum required by law. The Company made $0.1 million of contributions to its defined benefit pension plan in each of the 2016 and 2015 years. The Company expects to make contributions of less than $0.1 million to the defined benefit pension plan in 2017. Changes in the discount rate and actual investment returns which continue to remain lower than the long-term expected return on plan assets could result in the Company making additional contributions.

 

Funded Status

 

The funded status of the pension plan is as follows:

 

    December 31,  
    2016     2015  
Projected benefit obligation   $ 2,628     $ 2,578  
Fair value of plan assets     2,456       2,515  
Accrued obligation (long term)   $ 172     $ 63  

 

   63  
 

 

Assumptions

 

Assumptions used in accounting for the pension plan are as follows:

 

    December 31,  
    2016     2015  
Weighted average discount rate used to determine the accrued benefit obligations     3.80 %     3.90 %
Discount rate used to determine the net pension expense     3.90 %     3.80 %
Expected long-term rate on plan assets     6.50 %     6.50 %

  

To determine the expected long-term rate of return on pension plan assets, the Company considers the current and expected asset allocations, as well as historical and expected returns on various categories of plan assets. The Company applies the expected rate of return to a market related value of the assets which reduces the underlying variability in assets to which the Company applies that expected return. The Company amortizes gains and losses as well as the effects of changes in actuarial assumptions and plan provisions over a period no longer than the average future service of employees.

 

Primary actuarial assumptions are determined as follows:

 

The expected long-term rate of return on plan assets is based on the Company’s estimate of long-term returns for equities and fixed income securities weighted by the allocation of assets in the plans. The rate is impacted by changes in general market conditions, but because it represents a long-term rate, it is not significantly impacted by short-term market swings. Changes in the allocation of plan assets would also impact this rate.

 

The assumed discount rate is used to discount future benefit obligations back to today’s dollars. The discount rate is reflective of yield rates on U.S. long-term investment grade corporate bonds on and around the December 31 valuation date. This rate is sensitive to changes in interest rates. A decrease in the discount rate would increase the Company’s obligation and expense.

 

16. BUSINESS SEGMENT, GEOGRAPHIC AND CUSTOMER INFORMATION

 

The Company follows ASC 280 - Segment Reporting in determining its reportable segments.  The Company considered the way its management team, most notably its chief operating decision maker, makes operating decisions and assesses performance and considered which components of the Company’s enterprise have discrete financial information available.  As the Company makes decisions using a manufactured products vs. distributed products and services group focus, its analysis resulted in two reportable segments: T&D Solutions and Critical Power Solutions.  The Critical Power Solutions reportable segment is the Company’s Titan Energy Systems Inc. subsidiary. The T&D Solutions reportable segment is an aggregation of all other Company subsidiaries, together with sales and expenses attributable to the strategic sales group for its T&D Solutions marketing activities.

 

The T&D Solutions segment is involved in the design, manufacture and distribution of electrical transformers and switchgear used primarily by utilities, large industrial and commercial operations to manage their electrical power distribution needs. The Critical Power Solutions segment provides power generation equipment, and aftermarket field-services primarily to help customers ensure smooth, uninterrupted power to operations during times of emergency.

 

   64  
 

 

The following tables present information about segment income and loss:

 

    Year Ended December 31,
    2016   2015
Revenues        
T&D Solutions        
Transformers   $ 81,111     $ 75,598  
Switchgear     14,759       9,273  
      95,870       84,871  
Critical Power Solutions                
Equipment     10,166       14,929  
Service     8,366       6,722  
      18,532       21,651  
Consolidated   $ 114,402     $ 106,522  

 

    Year Ended December 31,
    2016   2015
Depreciation and Amortization        
T&D Solutions   $ 1,617     $ 1,643  
Critical Power Solutions     1,405       1,449  
Unallocated Corporate Overhead Expenses     67       73  
Consolidated   $ 3,089     $ 3,165  

 

    Year Ended December 31,
    2016   2015
Operating Income (Loss)        
T&D Solutions   $ 4,499     $ (972 )
Critical Power Solutions     62       (847 )
Unallocated Corporate Overhead Expenses     (3,206 )     (3,481 )
Consolidated   $ 1,355     $ (5,300 )

  

The following table presents information which reconciles segment assets to consolidated total assets:

 

    December 31,
    2016   2015
Assets        
T&D Solutions   $ 59,779     $ 50,890  
Critical Power Solutions     10,620       12,173  
Corporate     7,009       3,813  
Consolidated   $ 77,408     $ 66,876  

  

Corporate assets consist primarily of cash and deferred tax assets.

 

Revenues are attributable to countries based on the location of the Company’s customers:

 

    Year Ended December 31,  
    2016     2015  
Revenues            
United States   $ 83,083     $ 68,752  
Canada     31,210       36,740  
Others     109       1,030  
Total   $ 114,402     $ 106,522  

 

Sales to Siemens accounted for approximately 15% of the Company’s sales in 2016, as compared to 10% in 2015.

 

65 
 

 

The distribution of the Company’s property, plant and equipment by geographic location is approximately as follows:

 

    December 31,  
    2016     2015  
Property, plant and equipment                
Canada   $ 3,793     $ 4,181  
United States     1,334       1,582  
Mexico     1,464       1,586  
Total   $ 6,591     $ 7,349  

 

17. BASIC AND DILUTED INCOME (LOSS) PER COMMON SHARE

 

Basic and diluted income (loss) per common share are calculated based on the weighted average number of shares outstanding during the period. The Company’s employee and director stock option awards, as well as incremental shares issuable upon exercise of warrants, are not considered in the calculations if the effect would be anti-dilutive. The following table sets forth the computation of basic and diluted income (loss) per share (in thousands, except per share data):

 

 

    Year Ended December 31,  
    2016     2015  
Numerator:            
Net loss   $ (1.063 )   $ (5,881 )
                 
Denominator:                
Weighted average basic shares outstanding     8,700       7,746  
Effect of dilutive securities - equity based compensation plans            
Net dilutive effect of warrants outstanding            
Denominator for diluted earnings per common share     8,700       7,746  
                 
Net loss per common share:                
Basic   $ (0.12 )   $ (0.76 )
Diluted   $ (0.12 )   $ (0.76 )
                 
Anti-dilutive securities (excluded from per share calculation):                
Equity based compensation plans     173       345  
Warrants     51       51  

 

18. SUBSEQUENT EVENTS

 

On March 15, 2017, the maturity date of the revolving loans under the Canadian facilities was extended to July 31, 2018. Additionally, the amendment to the CAD ARCA included the following changes: Facility A was increased to a maximum of $8.0 million CAD; the reduced Facility B quarterly payment of $47 CAD will continue after July 31, 2017 until our borrowings under the facility is fully paid on April 30, 2018; and the reduced Facility C quarterly payment of $36 USD will continue until July 31, 2018, with a balloon payment of $352 due on July 31, 2018.

 

On March 15, 2017, the expiration date of the revolving loans under the U.S facilities was extended to July 31, 2018. Additionally, this extension included the following changes: USD Facility A was increased to a maximum of $15.0 million USD and USD Facility B quarterly payments of $31 USD will continue until July 31, 2018, with a balloon payment of $4,438 on July 31, 2018.

 

On March 17, 2017, the option holder N. Mazurek, CEO, exercised 13,000 options which had an exercise price of $4.53 per share. The option holder remitted $59 in cash, resulting in a net issuance of 13,000 shares of Common Stock. 

 

 

66 
 

 

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

 

Not applicable.

 

ITEM 9A.  CONTROLS AND PROCEDURES.

 

Management’s Conclusions Regarding Effectiveness of Disclosure Controls and Procedures

 

We conducted an evaluation of the effectiveness of our “disclosure controls and procedures” (“Disclosure Controls”), as defined by Rules 13a-15(e) and 15d-15(e) of the Exchange Act, as of December 31, 2016, the end of the period covered by this Annual Report on Form 10-K. The Disclosure Controls evaluation was done in conjunction with an independent consulting firm and under the supervision and with the participation of management, including our chief executive officer and chief financial officer. There are inherent limitations to the effectiveness of any system of disclosure controls and procedures. As of December 31, 2016, based on the evaluation of these disclosure controls and procedures, and in light of the material weaknesses found in our internal controls over financial reporting, our chief executive officer and chief financial officer have concluded that our disclosure controls and procedures were not effective.

 

Management’s Report on Internal Control Over Financial Reporting

 

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external reporting purposes in accordance with generally accepted accounting principles.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness of internal control over financial reporting to future periods are subject to the risk that controls may become inadequate because of changes in conditions or that the degree of compliance with the policies or procedures may deteriorate over time.

 

Management, including our chief executive officer and our chief financial officer, assessed the effectiveness of our internal control over financial reporting as of December 31, 2016. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control — Integrated Framework (2013).  A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. In our assessment of the effectiveness of internal control over financial reporting as of December 31, 2016, we determined that controls are not effective because control deficiencies existed that constituted a material weakness, as described below:

 

1)       Material weakness in financial close and reporting process – We did not maintain a sufficient complement of adequately trained personnel with an appropriate level of knowledge, experience, and training in the application of GAAP commensurate with our financial reporting requirements to identify and address risks critical to financial reporting. There is also a deficiency in our ability to gather, analyze and thoroughly review information related to financial reporting in a timely manner, and resulted in a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis.

 

The material weakness described above could result in further misstatements of the aforementioned accounts and disclosures that would result in a material misstatement of the consolidated financial statements that would not be prevented or detected.

 

This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting, as permitted by the rules of the SEC.

  

67 
 

 

Remediation Plan

 

As of December 31, 2016, there were control deficiencies which constituted a material weakness in our internal control over financial reporting. Management has taken, and is taking steps to strengthen our internal control over financial reporting. Specifically

 

We have executed a plan that provided for the recruitment of new senior personnel at our reporting unit locations, as well as additional training for existing accounting staff as it relates to our financial reporting requirements.
Members of management and the accounting staff have received additional training related to policies, procedures and internal controls, including Pioneer’s policies regarding monthly reconciliations and supervisory review procedures for all significant accounts.
Our corporate accounting group, assisted by an independent consulting firm that has been engaged, has reviewed and assessed progress on the remediation plan noted above.

 

In addition, we have implemented a component part of our restructuring and integration plan, designed to reduce the number of our production facilities from six locations to three. As a result, the controls and procedures which were previously identified as ineffective at our Bemag and PCPI reporting units have become inapplicable, as performance of their relevant business activities has been transferred to other Pioneer locations having suitable entity-level controls and financial closing and reporting processes. While we have taken certain actions to address the material weaknesses identified, additional measures may be necessary as we work to improve the overall effectiveness of our internal controls over financial reporting. 

 

As previously disclosed in Item 9A of our Annual Report on Form 10-K for the year ended December 31, 2015, the control deficiencies which constituted a "material weakness" identified was a material weakness in our payroll tax payment process due to a lack of payroll preventative controls to ensure payroll taxes were filed and paid timely, as well as management review controls which resulted in the non-compliance with payroll tax requirements. As one of the remediation measures taken to address such control deficiencies, we contracted with a third party to process our payroll, prepare all payroll reports and timely remit these taxes to the appropriate tax authorities. In our assessment of the effectiveness of internal control over financial reporting as of December 31, 2016, management has concluded that this has been fully remediated at December 31, 2016.

 

Changes in Internal Control over Financial Reporting

 

Other than the changes discussed above in the Remediation Plan, there has been no change in our internal control over financial reporting during the fourth quarter ended December 31, 2016 that materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

ITEM 9B. OTHER INFORMATION.

 

None.

 

PART III

 

ITEM 10.  DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

The information required by this item will be included under the caption “Directors, Executive Officers and Corporate Governance” in our Proxy Statement for the 2017 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the fiscal year ended December 31, 2016 (the “2017 Proxy Statement”) and is incorporated herein by reference. The information required by this item regarding delinquent filers pursuant to Item 405 of Regulation S-K will be included under the caption “Section 16(a) Beneficial Ownership Reporting Compliance” in the 2016 Proxy Statement and is incorporated herein by reference.

 

ITEM 11.  EXECUTIVE COMPENSATION

 

The information required by this item will be included under the captions “Director Compensation,” “Executive Compensation” and “Directors, Executive Officers and Corporate Governance – Corporate Governance and Board Matters – Compensation Committee Interlocks and Insider Participation” in the 2017 Proxy Statement and is incorporated herein by reference.

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

The information required by this item will be included under the captions “Common Stock Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information” in the 2017 Proxy Statement and is incorporated herein by reference.

 

68 
 

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

Additional information required by this item will be included under the captions “Certain Relationships and Related Transactions” and “Directors, Executive Officers and Corporate Governance  – Corporate Governance and Board Matters  – Director Independence” in the 2017 Proxy Statement and is incorporated herein by reference.

 

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

 

The information required by this item will be included under the caption “Independent Registered Public Accounting Firm” in the 2017 Proxy Statement and is incorporated herein by reference.

 

PART IV

 

ITEM 15.  EXHIBITS AND FINANCIAL STATEMENT SCHEDULES.

 

a. We have filed the following documents as part of this Annual Report on Form 10-K:
     
  1. Consolidated Financial Statements
     
    The following financial statements are included in Item 8 herein:
    Report of Independent Registered Public Accounting Firm
    Consolidated Statements of Operations for the Years Ended December 31, 2016 and 2015
    Consolidated Statements of Comprehensive Income (Loss) for the Years Ended December 31, 2016 and 2015
    Consolidated Balance Sheets as of December 31, 2016 and 2015
    Consolidated Statements of Cash Flows for the Years Ended December 31, 2016 and 2015
    Consolidated Statements of Stockholders’ Equity for the Years Ended December 31, 2016 and 2015
    Notes to Consolidated Financial Statements
     
  2. Financial Statement Schedules
    None
     
  3. Exhibits
    See the Index to Exhibits immediately following the signature page of this Annual Report on Form 10-K.

 

 

ITEM 16.  FORM 10-K SUMMARY.

 

None

 

69 
 

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

    PIONEER POWER SOLUTIONS, INC.
     

Date: March 29, 2017  

By: /s/ Nathan J. Mazurek
    Name: Nathan J. Mazurek
    Title: Chief Executive Officer

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

Signature   Title   Date
/s/ Nathan J. Mazurek      

March 29, 2017

Nathan J. Mazurek  

President, Chief Executive Officer and Chairman of the Board of Directors (Principal Executive Officer)

   
         
/s/ Thomas Klink       March 29, 2017
Thomas Klink   Chief Financial Officer, Secretary, Treasurer and Director (Principal Financial Officer and Principal Accounting Officer)    
         
/s/ Yossi Cohn       March 29, 2017
Yossi Cohn   Director    
         
/s/ David J. Landes       March 29, 2017
David J. Landes   Director    
         
/s/ Ian Ross       March 29, 2017
Ian Ross   Director    
         
/s/ David Tesler       March 29, 2017
David Tesler   Director    
         
/s/ Jonathan Tulkoff       March 29, 2017
Jonathan Tulkoff   Director    

 

70 
 

 

INDEX TO EXHIBITS

 

Exhibit No.   Description
3.1   Composite Certificate of Incorporation (Incorporated by reference to Exhibit 3.1 to Amendment No. 4 to the Registration Statement on Form S-1 of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on June 21, 2011).
     
3.2   Bylaws (Incorporated by reference to Exhibit 3.2 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 2, 2009).
     
4.1   Form of Securities Purchase Agreement (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 7, 2009).
     
4.2   Warrant to Purchase Common Stock, dated April 30, 2010, issued to Thomas Klink (Incorporated by reference to Exhibit 4.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on May 4, 2010).
     
4.3   Warrant to Purchase Common Stock, dated April 26, 2010 (Incorporated by reference to Exhibit 4.6 to Post-Effective Amendment No. 1 to Registration Statement on Form S-1 of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on June 1, 2010).
     
4.4   Form of Warrant to Purchase Common Stock, dated September 24, 2013, issued to Roth Capital Partners, LLC and to Monarch Capital Group, LLC (Incorporated by reference to Exhibit 4.8 to Amendment No. 1 to Registration Statement on Form S-1 of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on September 10, 2013).
     
10.1+   Form of Director and Officer Indemnification Agreement (Incorporated by reference to Exhibit 10.1 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission for the year ended December 31, 2010).  
     
10.2+   Pioneer Power Solutions, Inc. 2009 Equity Incentive Plan (Incorporated by reference to Exhibit 10.8 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 7, 2009).
     
10.3+   Form of 2009 Incentive Stock Option Agreement (Incorporated by reference to Exhibit 10.9 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 7, 2009).
     
10.4+   Form of 2009 Non-Qualified Stock Option Agreement (Incorporated by reference to Exhibit 10.10 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 7, 2009).
     
10.5+   Pioneer Power Solutions, Inc. 2011 Long-Term Incentive Plan (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on May 31, 2011).
     
10.6+   Employment Agreement, dated December 2, 2009, by and between Pioneer Power Solutions, Inc. and Nathan J. Mazurek (Incorporated by reference to Exhibit 10.7 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 7, 2009).
     
10.7+   Employment Agreement, dated March 30, 2012, by and between Pioneer Power Solutions, Inc. and Nathan J. Mazurek (Incorporated by reference to Exhibit 10.42 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on March 30, 2012).
     
10.8+   First Amendment to Employment Agreement, dated November 11th, 2014, by and between Pioneer Power Solutions, Inc. and Nathan J. Mazurek (Incorporated by reference to Exhibit 10.1 to the Quarterly Report on Form 10-Q of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on November 12, 2014).
     
10.9+   Employment and Non-Competition Agreement, dated August 12, 2010, by and between Pioneer Power Solutions, Inc. and Andrew Minkow (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on August 18, 2010).
     
10.10+   Employment Agreement, dated March 30, 2012, by and between Pioneer Power Solutions, Inc. and Andrew Minkow (Incorporated by reference to Exhibit 10.43 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on March 30, 2012).
     
10.11+   First Amendment to Employment Agreement, dated November 11th, 2014, by and between Pioneer Power Solutions, Inc. and Andrew Minkow (Incorporated by reference to Exhibit 10.2 to the Quarterly Report on Form 10-Q of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on November 12, 2014).

 

 
 

 

10.12+   Employment Agreement, dated April 30, 2010, by and between Jefferson Electric, Inc. and Thomas Klink (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on May 4, 2010).
     
10.13+   First Amendment to Employment Agreement, dated April 30, 2013, by and between Jefferson Electric, Inc. and Thomas Klink (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on April 30, 2013).
     
10.14*   Collective Labor Agreement, dated January 28, 2016, by and between Pioneer Transformers Ltd. and United Steelworkers, Local Section 9414  (Incorporated by reference to Exhibit 10.8 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission for the year ended December 31, 2010).
     
10.15   Collective Bargaining Agreement Nexus Magneticos S. de R.L. de C.V., dated January 1, 2011 (Incorporated by reference to Exhibit 10.35 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission for the year ended December 31, 2010).
     
10.16   Collective Labor Agreement, dated March 27, 2014, by and between Bemag Transformer Inc. and Syndicat Québécois des Employées et Employés de Service, Section Locale 298 (FTQ) (Incorporated by reference to Exhibit 10.1 to the Quarterly Report on Form 10-Q/A of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on October 31, 2014).
     
10.17^   Agreement dated February, 13, 2015, by and between Pioneer Transformers Ltd. and Hydro-Quebec Utility Company. (Incorporated by reference to Exhibit 10.17 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on April 2, 2015).
     
10.18   Agreement dated February 13, 2015, by and between Titan Energy Systems and Generac Power Systems, Inc. (Incorporated by reference to Exhibit 10.18 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on April 2, 2015).
     
10.19   Term Loan Agreement, dated July 25, 2012, by and between Nexus Magneticos S. de R.L. de C.V. and GE CF Mexico, S.A. de C.V. (Incorporated by reference to Exhibit 10.2 to Amendment No. 1 to the Quarterly Report on Form 10-Q/A of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on November 16, 2012).
     
10.20   Irrevocable Transfer of Title and Guaranty Trust Agreement, dated July 25, 2012, by and among, Nexus Magneticos S. de R.L. de C.V. and GE CF Mexico, S.A. de C.V., Jefferson Electric, Inc., GE CF Mexico, S.A. de C.V. and Banco Invex, S.A. (Incorporated by reference to Exhibit 10.3 to Amendment No. 1 to the Quarterly Report on Form 10-Q/A of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on November 16, 2012).
     
10.21   Corporate Guaranty, dated July 25, 2011, by and between Pioneer Power Solutions, Inc. and GE CF Mexico, S.A. de C.V. (Incorporated by reference to Exhibit 10.4 to Amendment No. 1 to the Quarterly Report on Form 10-Q/A of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on November 16, 2012).
     
10.22   Industrial Lease between Comercializadora Reynosa Para La Industria Maquiladora S.A. DE C.V. and Nexus Magneticos e Mexico S. de R.L. de C.V (Incorporated by reference to Exhibit 10.41 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on April 1, 2013).
     
10.23   Share Purchase Agreement, dated May 13, 2011, by and among Fiducie Familiale Mazoyer, Bon-Ange Inc., Gilles Mazoyer and 7834080 Canada Inc. (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on May 19, 2011).
     
10.24   Amendment Agreement, dated June 30, 2011, by and among Fiducie Familiale Mazoyer, Bon-Ange Inc., Gilles Mazoyer and 7834080 Canada Inc. (Incorporated by reference to Exhibit 10.3 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on July 5, 2011).
     
10.25   Equipment Purchase Agreement, dated July 1, 2011, by and among Vermont Transformer, Inc., GCEFF Inc., Gilles Mazoyer and 7834080 Canada Inc. (Incorporated by reference to Exhibit 10.4 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on July 5, 2011).
     
10.26   Credit Agreement, dated as of June 28, 2013, by and among Pioneer Power Solutions, Inc., as borrower, Pioneer Critical Power Inc. and Jefferson Electric, Inc., as guarantors, and Bank of Montreal, Chicago Branch, as lender (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on July 3, 2013).
     
10.27   Security Agreement, dated as of June 28, 2013, by and among Pioneer Power Solutions, Inc., Pioneer Critical Power Inc. and Jefferson Electric, Inc. and Bank of Montreal, Chicago Branch (Incorporated by reference to Exhibit 10.2 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on July 3, 2013).

 

 
 

 

10.28   Amended and Restated Letter Loan Agreement, dated as of June 28, 2013, by and among Pioneer Electrogroup Canada Inc., Pioneer Transformers Ltd. and Bemag Transformer Inc., as borrowers, and Bank of Montreal, as lender (Incorporated by reference to Exhibit 10.3 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on July 3, 2013).
     
10.29   First Amendment to Amended and Restated Letter Loan Agreement, dated as of March 10, 2014, by and among Pioneer Electrogroup Canada Inc., Pioneer Transformers Ltd. and Bemag Transformer Inc., as borrowers, and Bank of Montreal, as lender (Incorporated by reference to Exhibit 10.30 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on March 14, 2014).
     
10.30   Guaranty Agreement, dated as of June 28, 2013, by Pioneer Power Solutions, Inc. in favor of Bank of Montreal (Incorporated by reference to Exhibit 10.4 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on July 3, 2013).
     
10.31   First Amendment to Credit Agreement, dated as of August 7, 2013, by and among Pioneer Power Solutions, Inc., Jefferson Electric, Inc., Pioneer Critical Power Inc. and Bank of Montreal (Incorporated by reference to Exhibit 10.1 to the Quarterly Report on Form 10-Q of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on August 14, 2013).
     
10.32   Second Amendment to Credit Agreement, by and among Pioneer Power Solutions, Inc. and Bank of Montreal, Chicago Branch (Incorporated by reference to Exhibit 10.1 to the Quarterly Report on Form 10-Q of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on November 12, 2013).
     
10.33   Third Amendment to Credit Agreement, by and among Pioneer Power Solutions, Inc. and Bank of Montreal, Chicago Branch (Incorporated by reference to Exhibit 10.34 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on March 14, 2014).
     
10.34   Fourth Amendment to Credit Agreement, by and among Pioneer Power Solutions, Inc. and Bank of Montreal, Chicago Branch (Incorporated by reference to Exhibit 10.35 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on March 14, 2014).
     
10.35   Fifth Amendment to Credit Agreement, dated as of December 2, 2014, by and among Pioneer Power Solutions, Inc. and Bank of Montreal, Chicago Branch (Incorporated by reference to Exhibit 10.4 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 3, 2014).
     
10.36   Sixth Amendment to Credit Agreement, dated as of March 27, 2015, by and among Pioneer Power Solutions, Inc. and Bank of Montreal, Chicago Branch. (Incorporated by reference to Exhibit 10.36 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on April 2, 2015).
     
10.37   Seventh Amendment to Credit Agreement, dated as of May 15, 10`5, by and among Pioneer Power Solutions, Inc. and Bank of Montreal, Chicago Branch (Incorporated by reference to Exhibit 10.1 to the Quarterly Report on Form 10-Q of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on May 15, 2015).
     
10.38   Waiver and Eighth Amendment to Credit Agreement, dated as of August 12, 2015, by and among Pioneer Power Solutions, Inc. and Bank of Montreal, Chicago Branch (Incorporated by reference to Exhibit 10.1 to the Quarterly Report on Form 10-Q of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on August 12, 2015).
     
10.39   Amendment to Amended and Restated Loan Agreement, dated as of July 30, 2015, by and among Pioneer Electrogroup Canada Inc., as borrower, Pioneer Power Solutions, Inc., as guarantor, and Bank of Montreal, as lender (Incorporated by reference to Exhibit 10.2 to the Quarterly Report on Form 10-Q of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on August 12, 2015).
     
10.40   Limited Duration Waiver and Consent Letter, dated as of November 18, 2015, by and among Pioneer Power Solutions, Inc., Pioneer Electrogroup Canada Inc. and Bank of Montreal, Chicago Branch (Incorporated by reference to Exhibit 10.1 to the Quarterly Report on Form 10-Q of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on November 23, 2015).
     
10.41   Form of Series D Convertible Preferred Stock Purchase Agreement (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 3, 2014).
     
10.42   Series A-1 Convertible Preferred Stock Purchase Agreement, dated as of December 2, 2014, by and between Titan Energy Worldwide, Inc. and PTES Acquisition Corp. (Incorporated by reference to Exhibit 10.2 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 3, 2014).
     
10.43   Loan and Security Agreement, dated as of December 2, 2014, by and between Titan Energy Worldwide, Inc. and PTES Acquisition Corp. (Incorporated by reference to Exhibit 10.3 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 3, 2014).

 

 
 

 

10.44   Form of Note Purchase Agreement by and between PTES Acquisition Corp. and certain note holders (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on December 19, 2014).
     
10.45+   General Release and Severance Agreement, dated January 7, 2016, by and between Pioneer Power Solutions, Inc. and Andrew Minkow (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on January 11, 2016).
     
10.50   Limited Duration Waiver and Consent Letter, dated as of March 21, 2016, by and among Pioneer Power Solutions, Inc, Pioneer Electrogroup Canada Inc. and Bank of Montreal, Chicago Branch (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on March 25, 2016).
     
10.51   Amended and Restated Credit Agreement, dated as of April 29, 2016, by and among Pioneer Power Solutions, Inc., as borrower, each of the domestic subsidiary guarantors signatory thereto and Bank of Montreal, Chicago Branch, as lender (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on May 4, 2016).
     
10.52   Amended and Restated Credit Agreement, dated as of April 29, 2016, by and among Pioneer Electrogroup Canada Inc., as borrower, each of the Canadian subsidiary guarantors signatory thereto and Bank of Montreal, as lender (Incorporated by reference to Exhibit 10.2 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on May 4, 2016).
     
10.53+   Second Amendment to Employment Agreement, dated June 30, 2016, by and between Pioneer Power Solutions, Inc. and Nathan J. Mazurek (Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on July 1, 2016).
     
10.54+   Second Amendment to Employment Agreement, dated June 30, 2016, by and between Jefferson Electric, Inc. and Thomas Klink. (Incorporated by reference to Exhibit 10.2 to the Current Report on Form 8-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on July 1, 2016).
     
10.55*   Waiver Letter, dated March 6, 2017, from Bank of Montreal, Chicago Branch, as lender.
     
10.56*  

First Amending Agreement, dated as of March 15, 2017, by and among Pioneer Power Solutions, Inc., as borrower, each of the domestic subsidiary guarantors signatory thereto and Bank of Montreal, Chicago Branch, as lender. 

     
10.57*  

First Amending Agreement, dated as of March 15, 2017, by and among Pioneer Electrogroup Canada Inc., as borrower, each of the Canadian subsidiary guarantors signatory thereto and Bank of Montreal, as lender. 

     
21.1   List of subsidiaries. (Incorporated by reference to Exhibit 21.1 to the Annual Report on Form 10-K of Pioneer Power Solutions, Inc. filed with the Securities and Exchange Commission on April 2, 2015).
     
23.1*   Consent of BDO USA, LLP
     
31.1*   Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
     
31.2*   Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
     
32.1*   Certification of Chief Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
     
32.2*   Certification of Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
     
101*   The following materials from the Company’s Annual Report on Form 10-K for the year ended December 31, 2016, formatted in XBRL (eXtensible Business Reporting Language), (i) Consolidated Statements of Operations, (ii) Consolidated Balance Sheets, (iii) Consolidated Statements of Comprehensive Income, (iv) Consolidated Statements of Cash Flows and (v) Notes to the Consolidated Financial Statements.

 

 

^  Certain portions of this exhibit have been omitted and filed separately with the Securities and Exchange Commission under a confidential treatment request pursuant to Rule 24b-2 of the Securities Exchange Act of 1934, as amended.

+  Management contract or compensatory plan or arrangement.

* Filed herewith.